Abstract:Metal bismuth is mainly produced as a by-product in the production of lead, tungsten, copper, silver, gold, tin and zinc. Approximately 90 % of all extracted bismuth is obtained from lead, copper and other concentrates. The main source of bismuth is lead concentrates obtained during the processing of lead, as well as lead-zinc and other polymetallic ores. During the processing of these concentrates, bismuth almost completely enters the rough lead, from which it is removed during its refining. The most common technologies for the recovery of bismuth from lead ingots are the Kroll-Betterton process and the Betts electrolytic process. During the electrolysis of the Bi-Pb alloy, the separation of three products has been established, they are anode and cathode alloys, as well as salt melt. The complexity of pyroelectrometallurgical processing of a bismuth-poor alloy with the production of rough bismuth in one stage is confirmed, which necessitates the use of two stages of electrolysis. At the first stage of electrolysis, the anode product‐1 (17.3–48.5 % of the initial Pb-Bi alloy) of the composition has been isolated,%: 16.6–48.4 Bi; 51.4–83.2 Pb; operational extraction,%: 92.2–96.6 Bi; 9.8–44.4 Pb; main phases Bi0,3Pb0,7 and Bi0,95Pb0,05. A six-fold bismuth enrichment is achieved in the anode product. At the second stage of electrolysis of the previously isolated anode product of the composition,%: 26.7 Bi; 73.1 Pb; 0.13 Cu; 0.08 Zn, the anode product‐2 (28.1 % of the enriched Pb-Bi alloy) of the composition has been separated,%: 93.6 Bi; 4.1 Pb; 0.086 Ag; 0.0066 As; 0.006 Sb; 0.0013 Cu; 0.001 Sn; 0.0014 Zn; stage extraction,%: 98.6 Bi; 1.6 Pb; main phase Bi0,95Pb0,05. As a result of pyroelectrometallurgical processing of a Pb-Bi alloy (~10 % Bi) with anode polarization in two stages, an anode product (8.7 % of the initial alloy) of the composition has been isolated,%: ≥ 93.6 Bi; 4.1 Pb; extraction from the initial alloy,%: 93.0 Bi; 0.4 Pb has been obtained. The following modes are recommended for pyroelectrometallurgical processing in two stages of Pb-Bi alloy: process temperature 550–600 °C; anode current density: 0.5 A/cm2 at the first stage; 0.2–0.3 A/cm2 at the second stage; cathode current density: 1.5 A/cm2 at the first stage; 1.0 A/cm2 at the second stage; operating voltage on the tub: at the first stage 8–12 V; at the second stage 5–8 V; the composition of the electrolyte at both stages,%: 7 NaCl; 35 KCl; 18 PbCl2; 40 ZnCl2; the amount of electrolyte output for processing: at the first stage – 10 % of the mass of the Pb-Bi alloy after alkaline treatment; at the second stage – 10 % of the mass of the anode product of the first stage

Study on continuous crystallization and purification of bismuth from Pb-Bi alloy

Hydrometallurgical process for extracting bismuth from by-product of lead smelting based on methanesulfonic acid system

Removal of impurities from bismuth pickling solution using solvent extraction with TBP

Electrolytic Processing of Pb-Bi Alloy

Pyroelectrometallurgical processing of bismuth-containing oxides

A novel model of bismuth and lead impurities removal behavior in purification of antimony metal by vacuum distillation

Purification of Cu–Zn melt based on the migration behavior of lead and bismuth under pulsed electric current

A novel process for extracting bismuth from high iron content copper smelting dust by magnetic separation and leaching process

Clean and efficient separation process for high-antimony crude tin

Electrochemical Production of Bismuth in the KCl-PbCl2 Melt

A multi-stage volatilization and condensation process for green and efficient recovery of valuable metals from High-Sb crude Sn

Clean and efficient preparation of metallic bismuth from methane-sulfonate electrolyte in the membrane electrolysis cell

A novel method for extracting crude Pb from lead-acid battery grid alloy by vacuum distillation

Efficient Separation and Purification Method for Recovering Valuable Elements from Bismuth Telluride Refrigeration Chip Waste

One step to direct extracted gold and silver from industrial Cu-Ag-Sb-Au alloy by a convenient bimetallic electrolytic separation process

Separation process for the production of high-purity antimony and bismuth oxides from copper electrorefining circuit wastes: The relevance of the redox control

Electrochemical Separation of Pb-Ag-Sb Alloys in the KCl-PbCl2 Melt

Intensifying separation of Pb and Sn from waste Pb-Sn alloy by ultrasound-assisted acid leaching: Selective dissolution and sonochemistry mechanism

Lead removal from tin chloride solution by barium sulfate and coprecipitation of (BaxPby)(SO4)2 for the processing of Pb Sn smelter slag

Non-Equilibrium Crystallization of Monotectic Zn-25%Bi Alloy under 600 g

Separation of antimony from lead-antimony alloy by molten salt electrolysis