Abstract:As a metallurgical and chemical raw material, electrolytic manganese is an important strategic resource. However, with the rapid development of the electrolytic manganese industry, the correct disposal of anode slime has become a serious problem. The purpose of this experiment was to reduce the occupation of land resources by the lead–containing waste residue of electrolytic manganese, reduce the pollution caused by the lead–containing waste residue to the environment and provide a reference for the research on the treatment technology and resource utilization of lead–containing waste residue in China. In this experiment, a special process was studied for the composition characteristics of lead–containing waste residues produced by electrolytic manganese. The acid leaching–enrichment–membrane electrolysis process was used to recover the lead in the lead–containing waste residues of electrolytic manganese and to recover the acid, so as to maximize the utilization of resources. In this experiment, the pretreated lead–containing waste residue was leached, enriched and concentrated, and then the enriched Pb2+ solution was used as cathode solution and dilute nitric acid as anode solution to recover lead by membrane electrolysis. The membrane electrolysis experiment uses lead plate as cathode, selects the best anion exchange membrane and anodic electrolysis material, and then takes lead recovery, acid recovery, current efficiency, voltage and power consumption as investigation indexes to explore and analyze the influence of many factors such as Pb2+ concentration and current density on the experiment, so as to determine the best membrane electrolysis process parameters. The optimum process parameters of lead recovery by membrane electrolysis were determined as follows: Pb2+ concentration was 40 g/L, current density was 30 mA/cm2, reaction temperature was 60 °C, cathodic pH value was 4.0, anodic HNO3 concentration was 0.5 mol/L, and cathodic ammonium nitrate concentration was 50 g/L. Under the optimal conditions, the current efficiency was 85.6%, the acid recovery was 73.03%, the lead recovery was 99.2%, the voltage was 3.8 V, and the power consumption was 1148.4 kW·h·t−1. Through the three steps of acid leaching–enrichment–membrane electrolysis, 78.53% of the Pb2+ in the original lead–containing waste residue can be recovered in the form of metal lead element, and the HNO3 recovered in the anode chamber can also be used again in the acid leaching process, which can not only solve the problem of environmental pollution caused by lead–containing waste residue but also achieve the recovery and utilization of resources, with good social and economic benefits.

Hydrometallurgical process for extracting bismuth from by-product of lead smelting based on methanesulfonic acid system

Clean and efficient preparation of metallic bismuth from methane-sulfonate electrolyte in the membrane electrolysis cell

Study on continuous crystallization and purification of bismuth from Pb-Bi alloy

A novel process for extracting bismuth from high iron content copper smelting dust by magnetic separation and leaching process

Pyroelectrometallurgical processing of bismuth-containing oxides

Energy-efficient fluorine-free electro-refining of crude lead in a green methanesulfonic acid system

An integrated and sustainable hydrometallurgical process for enrichment of precious metals and selective separation of copper, zinc, and lead from a roasted sand

Electrochemical behavior and electrolytic preparation of lead in eutectic NaCl−KCl melts

Removal of impurities from bismuth pickling solution using solvent extraction with TBP

Increasing the sustainability of copper electrorefining: Selective electrodeposition of antimony in the presence of bismuth from highly concentrated hydrochloric acid effluents

Electrolytic Processing of Pb-Bi Alloy

An Innovative Process for the Direct Recovery of Lead from Waste Lead Paste

Ultrasonic-enhanced Replacement of Lead in Lead Hydrometallurgy Process from Lead Leaching Solution

One step to direct extracted gold and silver from industrial Cu-Ag-Sb-Au alloy by a convenient bimetallic electrolytic separation process

Intensifying separation of Pb and Sn from waste Pb-Sn alloy by ultrasound-assisted acid leaching: Selective dissolution and sonochemistry mechanism

Lead removal from tin chloride solution by barium sulfate and coprecipitation of (BaxPby)(SO4)2 for the processing of Pb Sn smelter slag

Recovery and Utilization of Lead in Lead–Containing Waste Residue from Electrolytic Manganese Production

Kinetics and mechanism of selective leaching of bismuth from molybdenite and bismuthinite mixed ore

Chlorination-Molten Salt Electrolysis Process for Extracting Lead from its Sulphide Concentrates

High purity metal lead recovery from zinc direct leaching residue via chloride leaching and direct electrolysis

Electrochemical Production of Bismuth in the KCl-PbCl2 Melt