Abstract:In this work, we substantiate and develop a general pyroelectrometallurgical technology for processing bismuth dross and oxides (the intermediate products of lead bullion refining by the Betterton-Kroll process) to obtain crude bismuth. The research focuses on bismuth dross (3–5% Bi; 80–85% Pb) remelted at 500–600°С in the presence of NaNO3 and NaOH, as well as the obtained alkaline melt (bismuth oxides, 1–5% Bi; 60–70% Pb). The conducted experiments allowed us to determine optimal parameters of the main steps of processing bismuth oxide, as well as the characteristics of obtained products. Reduction smelting of bismuth oxides at 1150°C (with the addition of sodium carbonate, quartz and fine coke in the amount of 66, 25 and 5% of bismuth oxides mass, respectively) is proposed, leading to bismuth lead formation. Its decoppering is carried out at 350–600°C with 2.0% sulfur (by its weight), added to the melt. We propose to carry out the alkaline treatment of the decoppered Pb-Bi alloy at 500oC in contact with sodium hydroxide, sodium nitrate and sodium chloride, taken in amounts up to 10.2, 8.3 and 1.4% by weight of bismuth lead, respectively. Subsequent electrolysis comprises electrolytic processing of purified Pb-Bi alloy ingots at 550oC. The electrolyte consists of a melt with the following composition, %: NaCl – 7, KCl – 35, PbCl 2 – 18 and ZnCl 2 – 40. As a result, two end products were obtained by the proposed bismuth oxide processing. The anodic product at the second stage of electrolysis, crude bismuth (yielded 1.1% by the weight of oxides) contains 93.62% Bi and 4.14% Pb, extraction from oxides amounts to 19.0% Bi and 0.1% Pb. About 1.2% Bi and 9.1% Pb of their initial content in the oxides are transferred to the cathodic product containing 0.033% Bi and 97.83% Pb (the yield equalled 5.1% of the oxides).

A novel process for extracting bismuth from high iron content copper smelting dust by magnetic separation and leaching process

Hydrometallurgical process for extracting bismuth from by-product of lead smelting based on methanesulfonic acid system

Study on continuous crystallization and purification of bismuth from Pb-Bi alloy

Occurrence Behaviors of As/Sb/Bi in Copper Anode Slime and Their Separation by Compound Leaching Followed by Stepwise Precipitation

Removal of impurities from bismuth pickling solution using solvent extraction with TBP

Separation process for the production of high-purity antimony and bismuth oxides from copper electrorefining circuit wastes: The relevance of the redox control

Pyroelectrometallurgical processing of bismuth-containing oxides

Recovery of Copper, Lead, Zinc, and Arsenic from Copper Smelting Dust by Oxidative Alkaline Leaching and Sulfide Precipitation

Pyrometallurgical Recovery of Valuable Metals from Flue Dusts of Copper Smelter Through Lead Alloy

Effective separation of Zn, Fe, and Mn from roasting-water leaching solution of blast-furnace dust using a precipitation-solvent extraction process

Extraction of Pb, Cu, Zn and As from Fine Dust of Copper Smelting Industry via Leaching with Sulfuric Acid

Comprehensive recovery of arsenic and antimony from arsenic-rich copper smelter dust

Selective separation of copper over solder alloy from waste printed circuit boards leach solution

Recovery of Copper and Precious Metals and Separation of Lead from Flue Dust of Electronic Waste Processing

Selective Removal of Arsenic from Copper Smelting Flue Dusts by Alkaline Thiourea Leaching

An effective separation process of arsenic, lead, and zinc from high arsenic-containing copper smelting ashes by alkali leaching followed by sulfide precipitation

Recovery of antimony from acidic and alkaline leaching solution of low-grade antimony ore by electrowinning process

Leaching and removal of arsenic with waste acids from arsenic pre-removed dusts discharged from furnaces for pyrometallurgical refining of copper

Extraction of non-ferrous metals and arsenic from fine dusts of copper smelter production by combined technology

Element Distribution in Oxygen-Enriched Bottom-Blown Smelting of High-Arsenic Copper Dross

Selective recovery of antimony from Sb-bearing copper concentrates by integration of alkaline sulphide leaching solutions and microwave-assisted heating: A new sustainable processing route