Abstract:Publication date: 22 August 2024 Source: Solid State Phenomena Vol. 359 Author(s): Mathieu Opprecht, Sébastien Kerdilès, Jérôme Biscarrat, Philippe Godignon, Cédric Masante, Romain Laviéville, Nicolas Vaxelaire, Patrice Gergaud, Adeline Grenier, Carl Jung, Fabien Roze, Zeinab Chehadi, Louis Thuries, Lu Lu, Toshiyuki Tabata Nowadays, the growing worldwide electrification requires new materials for power management. SiC currently dominates the market thanks to excellent energy efficiency and broad operating capabilities. The present paper proposes an experimental study of the Ni-SiC backside ohmic contact formation using 308 nm nanosecond laser annealing (NLA). After Nickel (80 nm) sputtering over 4H-SiC wafers, various laser conditions are investigated, with energy density (ED) ranging from 2.4 to 5.4 J/cm2, pulse number from 1 to 20 and chuck temperature from 25 °C (RT) to 400 °C. For all series, a common scenario is noticed as the ED increases, with first solid-state reactions, then local melt and, finally, complete top layer melt and de-wetting at high ED. An in-depth understanding of the impact of laser conditions on these stages is achieved, based on electrical data, Raman spectroscopy, optical microscopy, Scanning Electron Microscopy (SEM) and Scanning Transmission Electron Microscopy (STEM). Results reveal that both high pulse numbers and the use of a hot chuck enable to significantly reduce the ED needed to form low resistance contacts. In addition, sheet resistances and contact resistivities are linked to the microstructure evolution upon NLA exposure. As a proof-of-concept, an acceptable process point yields a contact resistivity around 5×10-5 Ω cm2 when the wafer is processed at 25 °C and a value as low as 10-5 Ω cm2 for 400 °C processing. The mechanisms involved and discussed in the present work may very likely pave the way for other contact formation with limited thermal budget.

4H-SiC Ohmic Contact and Measure Technology

Characteristics of Ni-based ohmic contacts on n-type 4H-SiC using different annealing methods

4H-SiC Ohmic contacts formation by MoS2 layer intercalation: A first-principles study

A method to improve the specific contact resistance of 4H-SiC Ohmic contact through increasing the ratio of sp 2 -carbon

Ohmic Contacts on p-Type Al-Implanted 4H-SiC Layers after Different Post-Implantation Annealings

Searching for Device Processing Compatible Ohmic Contacts to Implanted P-Type 4H-Sic

Fabrication of Ohmic Contact on the Carbon-Terminated Surface of N-Type Silicon Carbide

How to Accurately Determine the Ohmic Contact Properties on n-Type 4H-SiC

Reaction Kinetics Investigation of Ni Ohmic Contacts on N-Type 4H-SiC

The Thermal Stability Study and Improvement of 4H-Sic Ohmic Contact

Ohmic contacts on n-type and p-type cubic silicon carbide (3C-SiC) grown on silicon

The Ohmic Contact of 4H-Sic Power Devices by Pulse Laser Annealing and Rapid Thermal Annealing

Ohmic Contacts Technology in Long-wavelength VCSEL Structure

Schottky-Ohmic Transition in Metal-All-around Electrical Contacts to Silicon Nanowires

Ni/4H-SiC Ohmic Contact Formation Using Multipulse Nanosecond Laser Annealing

Design and Fabrication of Ohmic Contact on AlGaN/GaN Heterostructure

Temperature Dependence of the Specific Resistance in Ti/Al/Ni/Au Ohmic Contacts on (nh4)2sx Treated N-Type GaN

On Contact Resistance Measurement Using Four-Terminal Kelvin Structures in Advanced Double-Polysilicon Bipolar Transistor Processes

Impurities in 4H Silicon Carbide: Site Preference, Lattice Distortion, Solubility, and Charge Transition Levels

Fabrication of Ohmic Contact on N-Type SiC by Laser Annealed Process: A Review

Formation of ohmic contacts on heavily Al + -implanted p-type SiC without alloying process