Abstract:Characteristics of aluminum alloys such as light weight, high strength-to-weight ratio and favorable corrosion resistance have brought about a bright application prospect in building structures. Wrought alloys are applicable to common beams and columns, while casting alloys can be fabricated as connectors in point-supported glass curtain wall and joints in spatial latticed structures on account of easy implement of moulding. Because of high strength, outstanding castability and remarkable mechanical properties after heat treatment, ZL111 in aluminum-silicon alloys is regarded as a desirable option. However, aluminum alloys are non-linear materials and their properties vary with casting and heat treatment modes. It is the well-marked distinction between aluminum alloy and ordinary carbon steel that special study on mechanical and fatigue performance is required. ZL111 raw materials were selected, with alloying agent and fabrication processes meeting the requirement of GB/T 1173-1995 standard. After T6 heat treatment process, test coupons were obtained by machining from raw materials. By utilization of electronic universal testing machine and cryogenic box, tensile tests at room temperature and low temperatures were performed. High-circle fatigue tests were carried out to obtain the fatigue performance of the material. Scanning electron microscope (SEM) was introduced to observe morphology of tensile and fatigue fractures. The tests revealed the relationship between mechanical property index and temperature, which indicated that the ZL111-T6 would increase in strength and plasticity. The microstructure of fractures validated and explained the macroscopic results. Furthermore, material strength at room temperature or low temperatures, stiffness and fatigue performance could satisfy bearing and normal serviceability requirement. Because of non existence of ductile-brittle transition temperature, superior corrosion resistance and outstanding castability, ZL111-T6 material is prone to fabricate complicated elements and joints withstanding cryogenic environment instead of carbon steel.

Development and application of high vacuum die casting in aluminum alloy

Effects of Vacuum Die Casting Processing Parameters on Mechanical Properties of AM50 Magnesium Alloy

Study on vacuum die casting process of aluminum alloys

An Experimental Investigation of the Material Properties of the A356 Aluminum Alloy Power Fittings in the Vacuum Die-Casting Process

Study on Mechanical Properties of Vacuum Die-cast AZ91D Magnesium Alloy

Investigating Thermal and Mechanical Characteristics of Die-Casting Aluminum Alloys: A Comprehensive Investigation via Thermal Analysis

Optimizing the Microstructure and Mechanical Properties of Vacuum Counter-Pressure Casting ZL114A Aluminum Alloy via Ultrasonic Treatment

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Experimental study of squeeze casting of ZK60 magnesium alloy

A novel die-casting Mg alloy with superior performance: Study of microstructure and mechanical behavior

Effect of Low Cu Content and Heat Treatment on the Microstructure and Mechanical Properties of High-Vacuum Die-Cast AlSiMgMn Alloys

Investigation of Microstructures and Mechanical Properties of Ultra-High Strength Al-Zn-Mg-Cu Alloy Prepared by Rapid Solidification and Hot Extrusion

Mechanical and Fatigue Performance Tests of Cast Aluminum Alloy ZL111 Adopted in Structure

Research of Die-Casting Process of ZA85 Magnesium Alloys

High strength and ductility aluminium alloy processed by high pressure die casting

Quench Sensitivity and Transformation Kinetics of High Vacuum Die Casting AlSi10MgMn Alloy

Effects of Hollow Sand Mold on the Microstructure and Mechanical Properties of a Low Pressure Aluminum Alloy Casting

Influence of Process Parameters on Filling Ability of A356 Aluminium Alloy in Expendable Pattern Shell Casting with Vacuum and Low Pressure

Correlation of Microstructure with Mechanical Properties and Fracture Behavior of A356-T6 Aluminum Alloy Fabricated by Expendable Pattern Shell Casting with Vacuum and Low-Pressure, Gravity Casting and Lost Foam Casting

Effect of Different Casting Techniques on the Microstructure and Mechanical Properties of AE44-2 Magnesium Alloy