Abstract:Hypoeutectic Al-Mg 2 Si alloys are distinguished as premier structural materials for transportation purposes, celebrated for their superior ductility and exceptional corrosion resistance. Enhancing strength and evaluating castability are critical for broadening their applicability. This study meticulously explores the influence of copper (Cu) on the mechanical attributes and castability of AlMg5.4Si2 alloys through detailed tensile testing and casting experiments utilizing constrained rod casting and spiral molds. Our findings reveal that increasing Cu levels refine grain size and condense the spacing of secondary dendrite arms, although this leads to a diminishing effect on the beneficial modifications introduced by bismuth (Bi). Specifically, the addition of 0.1 wt% Cu elevates the yield strength and ultimate tensile strength by 19 and 31 MPa, respectively. However, when Cu concentration exceeds 0.1 wt%, there is a marked degradation in mechanical properties due to the formation of the agglomerated S-Al 2 CuMg phase. Furthermore, the Cu enrichment escalates the hot tearing sensitivity and diminishes fluidity, predominantly due to an expanded freezing temperature range and an increased propensity for dendritization. The comparisons between experimental castability outcomes, numerical simulations and theoretical benchmarks have validated the predictive potential of these methodologies. These insights afford a nuanced comprehension of the multifaceted impacts of microalloying on the Al-Mg 2 Si cast alloys, and pave the way for compositional refinements in industrial practices. Critically, this research not only underscores the delicate balance required in alloy design, but also opens new pathways for enhancing the performance of transportation materials through strategic microalloying.

Effect of Low Cu Content and Heat Treatment on the Microstructure and Mechanical Properties of High-Vacuum Die-Cast AlSiMgMn Alloys

Effects of Cu Content and Heat Treatment Process on Microstructures and Mechanical Properties of Al−Si−Mg−Mn−xCu Cast Aluminum Alloys

Influence of intermetallics and element concentrations on the performance of the heat treated HVDC AlSiMgMnCu alloys at nano-scale

Synergistic Effects of Composition and Heat Treatment on Microstructure and Properties of Vacuum Die Cast Al-Si-Mg-Mn Alloys

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effect of Cu addition on microstructures and tensile properties of high-pressure die-casting Al-5.5Mg-0.7Mn alloy

Effect of Cu/Mg-containing intermetallics on the mechanical properties of the as-cast HVDC AlSiMgMnCu alloys by SBFSEM at nano-scale

Effects of Cu Content on Microstructure and Mechanical Properties of Rheo-Diecasting Al-6Zn-2Mg-xCu Alloys

Role of Cu on the Mechanical Properties and Microstructures Evolution of Al-xCu-1Li-0.4Mg–1Zn-0.1Zr Alloys

Melt Superheating on the Microstructure and Mechanical Properties of Diecast Al-Mg-Si-Mn Alloy

Effects of Cu content on the microstructure, mechanical property, and hot tearing susceptibility of die casting hypereutectic Al–22Si–0.4Mg alloy

Effects of Adding Trace Modification Elements and Heat Treatment on the Strength and Toughness of AlSi8Cu2MgMn Alloy

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Effects of Cu Content and Cu/Mg Ratio on the Microstructure and Mechanical Properties of Al–Si–Cu–Mg Alloys

Effect of Cu content on microstructures and properties of Al-Mg-Si-Cu alloys

Effect of Heat Treatment and Fe Content on the Microstructure and Mechanical Properties of Die-Cast Al–Si–Cu Alloys

Influence of Cu/Mg Ratio and Content on Heat-Resistance of Al–Cu–Mg Alloys

Evaluation of Cu Content on Mechanical Performance and Castability of AlMg5.4Si2 Alloy

Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al–Si–Mg–Mn alloys

Effects of Copper Content and Thermo-Mechanical Treatment on Microstructure and Mechanical Properties of AlMgSi(Cu) Alloys

Effect of Mg Level on the Microstructure and Mechanical Properties of Die-Cast Al–Si–Cu Alloys