Abstract:Two thermal behavior experiments of light gauge steel-framed composite walls with slotted studs and with external thermal insulation layers were carried in the lab of combined energy consumption test board for components of building envelope in school of municipal and environmental engineering at HIT.The method of thermocouple temperature measurement was used.The heat transfer coefficients and temperature of the measure points of composite wall were deeply investigated.Two conclusions were drawn from the test.According the test,the web slotted studs can reduce heat loss of the light gauge steel-framed composite walls,thus weakening the thermal bridge effect of the location in stud part,then significantly improve the thermal insulation properties of the composite walls;the composite wall heat transfer coefficients of the two test schemes are 0.315 W /(m2.K) and 0.250 W /(m2.K),which can meet the residential building envelope heat transfer coefficient limit value of cold areas well.Using the standard studs which recommended by Light Gauge Steel Framing Assembly Housing Specification(JG /T 182—2005),standard steel-framed walls were made up and selected as the research object.ANSYS finite element model is used to analyse the wall heat transfer properties.To obtain the goal as the light gauge steel-framed composite wall to meet the Harbin area construction outer wall energy conservation standard,the comprehensive inspection and contrast were analyzed of mean heat conductivity of four kinds of walls,the walls economic comparison was carried on,too.The design scheme of the light gauge steel-framed composite walls was proposed to meet the construction energy conservation standard in cold areas in China.

Study on heat transfer of light steel-framed composite walls in cold area

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Study on Heat Transfer for Sectional Parameters of the Slotted Light Steel-Framed Composite Wall

RESEARCH ON THE ENERGY-SAVING DESIGN SCHEMES OF LIGHT GAUGE STEEL-FRAMED COMPOSITE WALLS OF RESIDENTIAL CONSTRUCTION

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Analysis on Perforated Parameters for Heat Transfer of Light Steel-Framed Composite Wall

Finite Element Analysis of 3D Heat Transfer of Typical Thermal Bridge of Self-Thermal Insulation in Hot-Summer and Cold-Winter Zone

The Energy Saving Effect of Different Wall Insulation Configurations with the Intermittent and Compartmental Heating Method

Study on heat and mass transfer of the slotted light steel-framed composite wall at minimum temperature in Harbin

THE ENERGY SAVING DESIGN METHOD AND THERMAL BEHAVIOR RESEARCH DEVELOPMENT OF LIGHT-GAUGE STEEL-FRAMED COMPOSITE WALLS

Experimental study on early temperature field of large thickness composite shear wall

Field Test and Simulation Analysis of Thermal Performance of Bamboo Steel Composite Wall in Different Climate Regions

Heat transferring performance of light gauge steel panels

Analysis on Moisture Transfer for Two Light Steel- Framed Composite Walls

Shear behaviors of light-gauge composite walls under monotonic and cyclic loading

Experimental Research On Load-Carrying Capacities Of Composite Wall System With High-Strength Cold-Formed Thin-Walled Structures Subjected To Compression And Bending Load

Thermal Insulation Performance of Non-Load-bearing Light Gauge Slotted Steel Stud Walls

The Comparative Analysis on the Heat Insulation Performance of Several Building Exterior Walls

Analysis on mechanical performance of cold-formed steel stud composite walls with holes

Thermal Performance Analysis of Prefabricated Exterior Wall Panels of Prefabricated Civil Buildings in Hot Summer and Warm Winter Zones

Research on Shear Resistance Behavior of Cold-formed Thin-walled Steel Composite Walls with Opening