Abstract:As one of the most popular micro pattern gaseous detectors, gas electron multiplier (GEM) has been extensively studied and applied in recent years. The studies of the detector gain measurement and simulation are important, especially on a low gain scale. Traditionally, the gain measurement is realized by measuring the current or the pulse height spectrum. The former needs complicated electronic chain calibration and the latter needs necessarily to calculate the primary electron number. In this paper, an alternative method to determine the effective gain of GEM is introduced. The GEM gain can be precisely achieved through a gaseous detector of hybrid structure which combines GEM with micro-mesh gaseous structure (MM). The hybrid structure is called GEM-MM for short. The GEM-MM detector consists of drift cathode, standard GEM foil, stainless steel micro mesh, and readout anode. In this detector, the space between the cathode and the GEM foil is called drift gap and the other space between the GEM foil and the mesh is named transfer gap. When the X-rays irradiate into the gas volume of GEM-MM, the primary ionization occurs in both regions. Photoelectrons in the drift gap transfer from the drift region to amplification sensitive areas of the GEM and the MM detector while those in the transfer region are only amplified by the MM detector. In the energy spectrum of 55Fe, there is a clear energy profile including two sets of peaks. The gain of GEM can be easily obtained from the energy spectrum. Meanwhile, detailed simulations are carried out with Garfield++ software package. Simulation of the electron transport parameters has been optimized. and the gains of GEM detector are also calculated for three different gas mixtures. Experimental results of the gains ranging from 3 to 24 are obtained. The gains of GEM under different working voltages are studied precisely from the spectrum measurements. The Penning transfer rate could reach 0.32 ± 0.01 when the simulated value matches the measurement within 1σ error.

The Readout Methods of Gas Electron Multiplier Detector

Measurement and Simulation of the Hybrid Structure Gaseous Detector Gain

A Novel Method of Encoded Multiplexing Readout for Micro-Pattern Gas Detectors

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Preliminary Test of Thick GEM with Resistive Electrodes

FETs Array Readout of GEM Detector

Studies of Electron Transparency and Gain Characteristics of Gas Electron Multiplier

Experimental Study on the Performance of A Single-Thgem Gas Detector

Pixel Readout for GEM Detectors Based on Switched Field Effect Transistor Array

Application of CMOS Charge-Sensitive Preamplifier in Triple-Gem Detector

Study of charging up effect in a triple GEM detector

Gem Imaging Detector Based On Fet Array Readout

Gain Uniformity Experimental Study Performed on Triple-GEM Gas Detector

Experimental Study on the Performance of Tri-GEM Gas Detector

A Readout Asic for Gem Detectors

A High Compression Ratio Channel Multiplexing Method for Micro-pattern Gaseous Detectors

GEM applications outside high energy physics

New Developments and Future Perspectives of Gaseous Detectors

2-D Encoded Multiplexing Readout for THGEM

Study of Gas Electron Multiplier Detector Using ANSYS and GARFIELD$^{++}$

GEMs with Double Layred Micropattern Electrodes and their Applications