Abstract:Abstract The Gas Electron Multiplier (GEM) is a new age detector, which can handle the high flux of particles. The GEM foil, which is constructed using 50 μm highly insulating foil (Kapton/Apical) coated with 5 μm layers of copper, on both sides, with a network of specifically shaped holes is the major component of these detectors. The European Center for Nuclear Research (CERN) has been the sole supplier of the GEM foils until recently when a few other companies started manufacturing GEM foils under the transfer of technology (TOT) agrement from CERN. Techtra is one such company in Europe which gained a right to use CERN developed technology in order to produce commercially viable GEM foils. Micropack Pvt. Ltd. is another company in India which has successfully manufactured good quality GEM foils. Due to the microscopic structure of holes and dependence on the electric field inside, it becomes essential to study the defect and uniformity of holes along with the electrical property of foils under ambient conditions. In this work we are reporting the tests condition of Techtra GEM foils. We report on the development of a cost effective and efficient technique to study the GEM foils holes geometry, distribution, and defects. We also report on the electrical properties of these foils like leakage current, stability, and discharges. At the detector level, we describe the high voltage (HV) response, gain, uniformity, and stability. The GEMs have been proposed to have a wider applications, so we performed a feasibility study to utilize these for the imaging. We irrediated various objects of varying density with X-rays and reconstructed the images. The reconstructed image shows a good distinction between materials of different densities, which can be very useful in various applications like medical imaging or cargo imaging.

Gem Imaging Detector Based On Fet Array Readout

FETs Array Readout of GEM Detector

Pixel Readout for GEM Detectors Based on Switched Field Effect Transistor Array

The Design of a DAQ System for a GEM Imaging Detector Based on FET Array Readout

A Readout Asic for Gem Detectors

A BGA package design of a read-out ASIC for GEM imaging detector

GEMs with Double Layred Micropattern Electrodes and their Applications

A New GEM-like Imaging Detector with Electrodes Coated with Resistive Layers

A multi-channel readout electronics system for GEM and MICROMEGAS

Development of a New Γ-Ray Detector for PEM Applications

Advances in imaging THGEM-based detectors

A Full Functional Monolithic Active Pixel Sensor Prototype for the CEPC Vertex Detector

Performance of a triple-GEM detector with capacitive-sharing 3-coordinate (X-Y-U)-strip anode readout

Development of a Triple-GEM detector with strip readout and GEMINI chip for X rays and neutron imaging

Radiation imaging with optically read out GEM-based detectors

The Influence of Gem Readout Detector Gain on the Spatial Resolution of A Gem-Tpc Prototype

A 10 -channel Switch- Capacitor Array ASIC Design for GEM Detector

The qualification of GEM detector and its application to imaging

Application of CMOS Charge-Sensitive Preamplifier in Triple-Gem Detector

Experimental Study on the Performance of Tri-GEM Gas Detector

The Discussion on Time Projection Chamber (TPC) Based Upon GEM Detector