Abstract:Abstract The Gas Electron Multiplier (GEM) is a new age detector, which can handle the high flux of particles. The GEM foil, which is constructed using 50 μm highly insulating foil (Kapton/Apical) coated with 5 μm layers of copper, on both sides, with a network of specifically shaped holes is the major component of these detectors. The European Center for Nuclear Research (CERN) has been the sole supplier of the GEM foils until recently when a few other companies started manufacturing GEM foils under the transfer of technology (TOT) agrement from CERN. Techtra is one such company in Europe which gained a right to use CERN developed technology in order to produce commercially viable GEM foils. Micropack Pvt. Ltd. is another company in India which has successfully manufactured good quality GEM foils. Due to the microscopic structure of holes and dependence on the electric field inside, it becomes essential to study the defect and uniformity of holes along with the electrical property of foils under ambient conditions. In this work we are reporting the tests condition of Techtra GEM foils. We report on the development of a cost effective and efficient technique to study the GEM foils holes geometry, distribution, and defects. We also report on the electrical properties of these foils like leakage current, stability, and discharges. At the detector level, we describe the high voltage (HV) response, gain, uniformity, and stability. The GEMs have been proposed to have a wider applications, so we performed a feasibility study to utilize these for the imaging. We irrediated various objects of varying density with X-rays and reconstructed the images. The reconstructed image shows a good distinction between materials of different densities, which can be very useful in various applications like medical imaging or cargo imaging.

Experimental Study on the Performance of Tri-GEM Gas Detector

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Investigation on the performance of a thick ceramic gas electron multiplier

Study of charging up effect in a triple GEM detector

Study of Gas Properties for GEM-Based TPC

Feasibility Study of Gas Electron Multiplier Detector as an X-Ray Image Sensor

Determination of charge spread, position resolution, energy resolution and gain uniformity of Gas Electron Multipliers (GEM)

Performance Study of a GEM-TPC Prototype Using Cosmic Rays

Performance of a Small AT-TPC Prototype

The qualification of GEM detector and its application to imaging

Performance of the Micro-Tpc Reconstruction for GEM Detectors at High Rate

The Influence of Gem Readout Detector Gain on the Spatial Resolution of A Gem-Tpc Prototype

Investigation of the stability in the performance of triple GEM detectors for High Energy Physics experiments

GEMs with Double Layred Micropattern Electrodes and their Applications

The Study of Saturation Effect of GEM Detector for X-ray Imaging

Experimental studies of THGEM in different Ar/CO2 mixtures

Application of CMOS Charge-Sensitive Preamplifier in Triple-Gem Detector

A Practical Method to Determine the Spatial Resolution of Gem Detector

A Monte Carlo Triple-Gem Simulation Tuned with Data

Spatial resolution improvements with finer-pitch GEMs