Abstract:As one of the most popular micro pattern gaseous detectors, gas electron multiplier (GEM) has been extensively studied and applied in recent years. The studies of the detector gain measurement and simulation are important, especially on a low gain scale. Traditionally, the gain measurement is realized by measuring the current or the pulse height spectrum. The former needs complicated electronic chain calibration and the latter needs necessarily to calculate the primary electron number. In this paper, an alternative method to determine the effective gain of GEM is introduced. The GEM gain can be precisely achieved through a gaseous detector of hybrid structure which combines GEM with micro-mesh gaseous structure (MM). The hybrid structure is called GEM-MM for short. The GEM-MM detector consists of drift cathode, standard GEM foil, stainless steel micro mesh, and readout anode. In this detector, the space between the cathode and the GEM foil is called drift gap and the other space between the GEM foil and the mesh is named transfer gap. When the X-rays irradiate into the gas volume of GEM-MM, the primary ionization occurs in both regions. Photoelectrons in the drift gap transfer from the drift region to amplification sensitive areas of the GEM and the MM detector while those in the transfer region are only amplified by the MM detector. In the energy spectrum of 55Fe, there is a clear energy profile including two sets of peaks. The gain of GEM can be easily obtained from the energy spectrum. Meanwhile, detailed simulations are carried out with Garfield++ software package. Simulation of the electron transport parameters has been optimized. and the gains of GEM detector are also calculated for three different gas mixtures. Experimental results of the gains ranging from 3 to 24 are obtained. The gains of GEM under different working voltages are studied precisely from the spectrum measurements. The Penning transfer rate could reach 0.32 ± 0.01 when the simulated value matches the measurement within 1σ error.

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Experimental Study on the Performance of A Single-Thgem Gas Detector

Investigation of GEM-Micromegas Detector on X-ray Beam of Synchrotron Radiation

Measurement and Simulation of the Hybrid Structure Gaseous Detector Gain

Experimental Study on the Performance of Tri-GEM Gas Detector

Study of the two dimensional imaging performance for the gas electron multiplier using the resistive anode readout method

Study on the Count Plateau, Gas Gain and Energy Resolution of the Micromegas Detectors

Experimental Studies of Micromegas Detectors with Different Micro-Meshes

Investigation on the performance of a thick ceramic gas electron multiplier

A High-Gain, Low Ion-Backflow Double Micro-Mesh Gaseous Structure for Single Electron Detection

Charging-up Effects for Gas Microchannel Plate Detector

Study on the double micro-mesh gaseous structure (DMM) as a photon detector

Study of MicroMegas-based Detector with ICCD Imaging

The Time and Energy Signals, Counter Plateau, Energy Resolution and Gas Gains Performances of A New Kind of Micro-Pattern Gaseous Detector-Micromegas

Gain Uniformity Experimental Study Performed on Triple-GEM Gas Detector

Study of Gas Electron Multiplier Detector Using ANSYS and GARFIELD$^{++}$

A High Precision Signals Readout System for Micromegas Detector Based on the VMM

Optimizing Neon-based Gas Mixtures for Two-stage Amplification Fast-timing Micromegas Detectors

A Large-Area GEM Detector Using a Novel Self-Stretching Technique

Feasibility Study of Gas Electron Multiplier Detector as an X-Ray Image Sensor

Experimental Study of A Thgem Detector with Mini-Rims