Abstract:The new type of micro-pattern gaseous detector (MPGD) like the gas electron multiplier (GEM), features the advantage of good spatial resolution (sigma < 100 mu m). However, abundant and high density electronic channels are needed to obtain the high spatial resolution, which will lead to a great pressure on the detector construction, power consumption, spatial utilization, etc. The resistive anode readout method can help to obtain a good spatial resolution comparable to the pixel readout structure with an enormous reduction of the electronic channels. By using the thick film resistor technology, a new type of resistive structure, composed of high resistive square pad array with low resistive narrow border strips, is developed and applied to the readout anode of the triple GEM detector. For the resistive anode readout board used in the experiment, there are 6 x 6 resistive cells, which means that the detector needs only 49 electronics channels. To obtain a good spatial resolution, the cell size is set to be 6 mm x 6 mm. The surface resistivity of the pads and the strips are 150 k Omega/square and 1 k Omega/square, respectively. The performances of the detector, especially the two-dimensional imaging performance, are studied by using a Fe-55 (5.9 keV) source and an X ray tube (8 keV). The test results show that the spatial resolution of the detector is better than 80 mu m (sigma) by using the imaging of a 40 mu m wide slot, and the nonlinearity is better than 1.5% by the scanning along the x-axis of the readout board in the steps of 1 mm. Furthermore, quite a good two-dimensional imaging capability is achieved by the detector. These good performances of the detector show the feasibility of the resistive anode readout method for the GEM detector with large area and other detectors with similar structures in the two-dimensional imaging applications.

A High Compression Ratio Channel Multiplexing Method for Micro-pattern Gaseous Detectors

A Novel Method of Encoded Multiplexing Readout for Micro-Pattern Gas Detectors

An Extensible Induced Position Encoding Readout Method for Micropattern Gas Detectors

2-D Encoded Multiplexing Readout for THGEM

Charging-up Effects for Gas Microchannel Plate Detector

Perspectives of Micro-Pattern Gaseous Detector Technologies for Future Physics Projects

Study on the double micro-mesh gaseous structure (DMM) as a photon detector

The micro-resistive groove detector: a new compact single amplification-stage MPGD

An Optical Fiber-Based Flexible Readout System for Micro-Pattern Gas Detectors

Development of Micro-Pattern Gaseous Detectors for Nuclear Reaction Studies

A High-Gain, Low Ion-Backflow Double Micro-Mesh Gaseous Structure for Single Electron Detection

Study of MicroMegas-based Detector with ICCD Imaging

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Optimizing Neon-based Gas Mixtures for Two-stage Amplification Fast-timing Micromegas Detectors

Study of the two dimensional imaging performance for the gas electron multiplier using the resistive anode readout method

Study on the Real-time Lossless Data Compression Method Used in the Readout System for Micro-pattern Gas Detector

Dual trace gas detection using a compact two-channel multipass cell with dense and line spot patterns

Triple-range adjustable plane-concave multipass gas cell for high-precision trace gas detection based on TDLAS

Development of High Performance Micro-Resistive Groove Detector

Characterisation of resistive MPGDs with 2D readout

New Developments and Future Perspectives of Gaseous Detectors