Abstract:As one of the most popular micro pattern gaseous detectors, gas electron multiplier (GEM) has been extensively studied and applied in recent years. The studies of the detector gain measurement and simulation are important, especially on a low gain scale. Traditionally, the gain measurement is realized by measuring the current or the pulse height spectrum. The former needs complicated electronic chain calibration and the latter needs necessarily to calculate the primary electron number. In this paper, an alternative method to determine the effective gain of GEM is introduced. The GEM gain can be precisely achieved through a gaseous detector of hybrid structure which combines GEM with micro-mesh gaseous structure (MM). The hybrid structure is called GEM-MM for short. The GEM-MM detector consists of drift cathode, standard GEM foil, stainless steel micro mesh, and readout anode. In this detector, the space between the cathode and the GEM foil is called drift gap and the other space between the GEM foil and the mesh is named transfer gap. When the X-rays irradiate into the gas volume of GEM-MM, the primary ionization occurs in both regions. Photoelectrons in the drift gap transfer from the drift region to amplification sensitive areas of the GEM and the MM detector while those in the transfer region are only amplified by the MM detector. In the energy spectrum of 55Fe, there is a clear energy profile including two sets of peaks. The gain of GEM can be easily obtained from the energy spectrum. Meanwhile, detailed simulations are carried out with Garfield++ software package. Simulation of the electron transport parameters has been optimized. and the gains of GEM detector are also calculated for three different gas mixtures. Experimental results of the gains ranging from 3 to 24 are obtained. The gains of GEM under different working voltages are studied precisely from the spectrum measurements. The Penning transfer rate could reach 0.32 ± 0.01 when the simulated value matches the measurement within 1σ error.

Study on the double micro-mesh gaseous structure (DMM) as a photon detector

Optimization of the double micro-mesh gaseous structure (DMM) for low ion-backflow applications

A High-Gain, Low Ion-Backflow Double Micro-Mesh Gaseous Structure for Single Electron Detection

TMM: Triple Micro-Mesh Gaseous Structure with Ultralow Ion Backflow for Gaseous Photon Detectors

A novel fast timing detector based on the double micro-mesh gaseous structure with reflective photocathode

Study of MicroMegas-based Detector with ICCD Imaging

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Experimental Studies of Micromegas Detectors with Different Micro-Meshes

Study on the Count Plateau, Gas Gain and Energy Resolution of the Micromegas Detectors

Study of the two dimensional imaging performance for the gas electron multiplier using the resistive anode readout method

A High Compression Ratio Channel Multiplexing Method for Micro-pattern Gaseous Detectors

Measurement and Simulation of the Hybrid Structure Gaseous Detector Gain

Investigation of a hybrid structure gaseous detector for ion backflow suppression suppression

Optical Readout Micromegas for Monitoring Medical Pencil Scanning Proton Beams

Hybrid multi micropattern gaseous photomultiplier for detection of liquid-xenon scintillation

Charging-up Effects for Gas Microchannel Plate Detector

A thermal bonding method for manufacturing Micromegas detectors

Operation and performance of microhexcavity pixel detector in gas discharge and avalanche mode

Experimental Study on the Performance of A Single-Thgem Gas Detector

Photon-counting radiography with the gas microstrip detector

A Hybrid Structure Gaseous Detector for Ion Backflow Suppression*