Abstract:This paper reports on the development, manufacturing and testing of proportional γ-ray detectors filled with gas mixtures based on high-purity xenon. To let the gas mixtures into the detector, a special installation was developed and manufactured, consisting of components designed to work with high-purity gases. The influence of the gas pressure, its composition (pure Xe or its mixture with H2, CH4), and the voltage at the anode on the spectrometric resolution and gas gain of the detectors was studied. The addition of H2 or CH4 to xenon is used to increase the charge carrier drift velocity. These additives also stabilize the gas mixture, i. e. decrease the probability of gas breakdown at high voltage between the detector electrodes. Gas xenon, as well as its mixtures, of research purity grade (99.9999%) have been used. Proportional γ-ray detectors based on xenon gas can operate in both counting and spectrometric modes. To study the characteristics of the detectors, we used standard sources of γ-radiation 241Am, 137Cs, 152Eu, 133Ba. The best energy resolution values to date were obtained for a detector filled with a gas mixture of Xe + 2.1% CH4 at a pressure of 2.5 bar and an anode voltage of 2500 V; they were ~ 9.5% for an energy of 40 keV and ~ 5% for 120 keV. In the manufacturing of detectors intended for radiation monitoring and identification of radioactive materials, in particular in nuclear power, complex materials science problems have been solved. To increase the thermal and radiation resistance, all elements of the detector construction are made of materials that are weakly activated by ionizing radiation. In addition, the design of the detectors is completely free of glass elements and organic components. The detectors are designed to monitor technological processes and to work as part of radiation monitoring systems, including those at nuclear power plants.

Detection of Alpha Particles and Low Energy Gamma Rays by Thermo-Bonded Micromegas in Xenon Gas

Experimental Studies of Micromegas Detectors with Different Micro-Meshes

Design and fabrication of low background, high energy resolution thermal bonding Micromegas detectors for the PandaX-III experiment

A thermal bonding method for manufacturing Micromegas detectors

Microbulk Micromegas for the search of 0$νββ$ of 136Xe in the PandaX-III experiment

Micromegas readouts for double beta decay searches

Study on the Count Plateau, Gas Gain and Energy Resolution of the Micromegas Detectors

An Ultra-Low Background Alpha Detection System with a Micromegas-based Time Projection Chamber

Manufacture and Performance of the Thermal-Bonding Micromegas Prototype

A gaseous time projection chamber with Micromegas readout for low-radioactive material screening

Gas-Filled Gamma-Radiation Detector Based on High-Purity Xenon

Micromegas-TPC operation at high pressure in Xenon-trimethylamine mixtures

Study on Spatial Resolution of Micromegas As a Neutron Detector under Condition of High Neutron Flux and Γ Ray Background

A novel resistive anode using a germanium film for Micromegas detectors

Using Micromegas detectors for direct dark matter searches: challenges and perspectives

The Time and Energy Signals, Counter Plateau, Energy Resolution and Gas Gains Performances of A New Kind of Micro-Pattern Gaseous Detector-Micromegas

Detection capability of the Migdal effect for argon and xenon nuclei with position-sensitive gaseous detectors

Toward Application of a Thick Gas Electron Multiplier (THGEM) Readout for a Dark Matter Detector

Study on the performance of a high-gain gas electron multiplier-MicroMegas chamber

Development of large Micromegas readout planes for experiments searching for rare events

A High-Gain, Low Ion-Backflow Double Micro-Mesh Gaseous Structure for Single Electron Detection