Abstract:Micromegas technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background and pile-up event probability requires detector performances which are currently under studies in intensive RD activities. We studied performances of four different resistive Micromegas detectors with different read-out strip pitches. These chambers were tested using \sim120 GeV momentum pions, at H6 CERN-SPS beam line in autumn 2010. For a strip pitch 500 micrometers we measure a resolution of \sim90 micrometers and a efficiency of ~98%. The track angle effect on the efficiency was also studied. Our results show that resistive techniques induce no degradation on the efficiency or resolution, with respect to the standard Micromegas. In some configuration the resistive coating is able to reduce the discharge currents at least by a factor of <a class="link-external link-http" href="http://100.Micromegas" rel="external noopener nofollow">this http URL</a> technology is a promising candidate to replace Atlas forward muon chambers -tracking and trigger- for future HL-LHC upgrade of the experiment. The increase on background and pile-up event probability requires detector performances which are currently under studies in intensive RD activities. We studied performances of four different resistive Micromegas detectors with different read-out strip pitches. These chambers were tested using \sim120 GeV momentum pions, at H6 CERN-SPS beam line in autumn 2010. For a strip pitch 500 micrometers we measure a resolution of \sim90 micrometers and a efficiency of \sim98%. The track angle effect on the efficiency was also studied. Our results show that resistive techniques induce no degradation on the efficiency or resolution, with respect to the standard Micromegas. In some configuration the resistive coating is able to reduce the discharge currents at least by a factor of 100.

Manufacture and Performance of the Thermal-Bonding Micromegas Prototype

A thermal bonding method for manufacturing Micromegas detectors

Design and fabrication of low background, high energy resolution thermal bonding Micromegas detectors for the PandaX-III experiment

Experimental Studies of Micromegas Detectors with Different Micro-Meshes

Detection of Alpha Particles and Low Energy Gamma Rays by Thermo-Bonded Micromegas in Xenon Gas

Study on the Count Plateau, Gas Gain and Energy Resolution of the Micromegas Detectors

Performances of Anode-resistive Micromegas for HL-LHC

On the operation of a Micropattern Gaseous UV-Photomultiplier in Liquid-Xenon

A novel resistive anode using a germanium film for Micromegas detectors

Micromegas-TPC operation at high pressure in Xenon-trimethylamine mixtures

Design and commissioning of a 600 L Time Projection Chamber with Microbulk Micromegas

Micromegas in a Bulk

The Micromegas Project for the ATLAS Upgrade

Signal Formation Processes in Micromegas Detectors and Quality Control for large size Detector Construction for the ATLAS New Small Wheel

Impact of the gas choice and the geometry on the breakdown limits in Micromegas detectors

Investigation of GEM-Micromegas Detector on X-ray Beam of Synchrotron Radiation

A novel approach to building micromegas detectors enabled by precision manufacturing

First tests of "bulk" MICROMEGAS with resistive cathode mesh

Optical Readout Micromegas for Monitoring Medical Pencil Scanning Proton Beams

Combination of two Gas Electron Multipliers and a Micromegas as gain elements for a time projection chamber

Gap Uniformity Study of a Resistive Micromegas for the Multi-purpose Time Projection Chamber (MTPC) at Back-n White Neutron Source