Experimental Study on Offset Strip Fin Performance at Different Flow Angles

GUO Li-hua,QIN Feng,CHEN Jiang-ping,CHEN Zhi-jiu,ZHANG Wen-feng,FENG Zong-hui

DOI: https://doi.org/10.3321/j.issn:1003-9015.2007.05.004

2007-01-01

Abstract:In order to investigate the thermal-hydraulic performance of offset strip fins at different fluid flow directions, the flow angle β of working fluid flowing through the offset strip fin was defined. Taking the single layer fin as test object and according to the orthogonal design combined with various practical conditions, the 16 schemes of test specimen array were designed and experimented for studying their characteristics at different Reynolds numbers. The experimental results show that, when the flow angle increases from 0° to 90°, both the heat transfer factors and friction factors increase. The augmentations of interfins space and fin height are beneficial to improving the fin heat transfer performance, but also aggravate the friction losses. The 233 data points from 16 fin specimens were regressed, and under the experimental conditions, the empirical correlations of heat transfer factor and friction factor with Reynolds numbers, flow angles and geometrical parameters were fitted. The fitting error of heat transfer factor is less than ±15% for 97.4% data with the mean deviation of 5.21%, and the fitting error of friction factor is within ±15% for 87.6% data with the mean deviation of 5.73%.