Abstract:Composite ceramics of 0.7BaO center dot 0.3SrO center dot(I-gamma)TiO2 center dot gamma Nb2O5 (BSTN) with coexistence of barium strontium titanate, Ba1-xSrxTiO3 (BST), and strontium barium mobate, SrxBa1-xNb2O6 (SBN) phases were successfully prepared in situ by controlling excess components according to a specially designed formula of 0.7BaO center dot 0.3SrO center dot(1-gamma)TiO2 center dot gamma Nb2O5 and by using a traditional ceramic process. X-ray diffractometry (XRD), scanning electron microscopy (SEM) and energy dispersion spectrometer (EDS) were used to characterize the phase composition, morphology and the micro-area chemical composition of the composite ceramics. The results showed that the SBN tungsten bronze phase appeared and coexisted stably with the BST perovskite phase when the excess content of Nb2O5 was > 6mol%, whereas the BST perovsklite phase formed and coexisted stably with the SBN tungsten bronze phase when the excess content of TiO2 was > 5.3mol%. In the ease of the two phases being equivalent to each other in BSTN composite ceramics, Nb2O5 was hard to be resolved into the perovskite phase, however, a few of TiO2 was easy to be resolved in the tungsten bronze phase. The microstructure of the composite ceramics were consisted of two kinds of grains. The smaller polygonal grains were belonged to the BST phase, and the larger ones to the SBN phase. The coexistence of the two phases inhibited the growth of the BST crystal. The density of microstructure of the composite ceramic was higher than that of both the pure BST and SBN calcined at the same temperature for the same time.

Synthesis and Structure of Sol-Gel Derived PST/Bi<sub>2</sub>Ti<sub>2</sub>O<sub>7</sub> Composite Thin Films

Synthesis and Structure of Sol-Gel Derived Pst/Bi2ti2o7 Composite Thin Films

Effect of biphase on dielectric properties of Bi-doped lead strontium titanate thin films

Formation of Pb0.6sr0.4(Ti0.97mg0.03)O-2.97 Thin Films on Assembled Bottom Electrodes with Titanium Silicide Nanowires

The Structures and Dielectric Properties of Ba0.80Sr0.20TiO3/Pb0.82La0.18TiO3 Composite Thick Films with Addition of PbO–B2O3 Glass

Preparation PST Thin Films with Homogeneity Buffer Layer by RF Magnetron Sputtering Method

Preparations and Dielectric Properties of Ba0.80Sr0.20TiO3/PbO–B2O3 Thick Films

Control of VO•• ∼ TiTi′ Dipole Pairs As Well As MgTi″ Defects on Dielectric Properties of Mg Doped (pb0.35sr0.65)tio3 Thin Film

Structure and Dielectric Properties of Zn Doped PST Thin Films Prepared by Sol-Gel Method

Effect of Zn-Doping on the Tunable Behavior of (pb0.6sr0.4)tio3 Thin Films

Structure and Dielectric Properties of Highly (100)-Oriented PST Thin Films Deposited on MgO Substrates

In situ Preparation of BST(Nb)/SBN(Ti) Composites

Fabrication and Properties of Sol–Gel‐Derived BiScO3–PbTiO3 Thin Films

Dielectric Properties of 0.7bao·0.3sro·(1 − Y)tio2·ynb2o5 Composite Ceramics

Properties of Compositionally Graded BiScO3–PbTiO3Thin Films Fabricated by a Sol–Gel Process

Sintering Behavior and Dielectric Property of BST-BSL Composite Ceramics

Effect of PbO seeding layers on the structure and properties of the sol-gel-derived BiScO3-PbTiO3 thin films

Synthesis and Microstructure of Barium Bismuth Titanate Thin Films Using a Sol-Gel Technique

Epitaxial Growth and Dielectric Properties of Pb0.4Sr0.6TiO3 Thin Films on (00L)-Oriented Metallic Li0.3Ni0.7O2 Coated MgO Substrates

Effect of PbO-B<sub>2</sub>O<sub>3</sub> Glass Additive on the Dielectric Properties of Ba<sub>0.80</sub>Sr<sub>0.20</sub>TiO<sub>3</sub> /Pb<sub>0.88</sub>La<sub>0.12</sub>Ti<sub>0.97</sub>O<sub>3</sub> Composite Thick Films

Preparation of (1− <i>x</i> %)(Na<sub>0.5</sub>Bi<sub>0.5</sub>)TiO<sub>3</sub>– <i>x</i> %SrTiO<sub>3</sub> thin films by a sol–gel method for dielectric tunable applications

Synthesis and Structure of Sol-Gel Derived PST/Bi&lt;sub&gt;2&lt;/sub&gt;Ti&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;7&lt;/sub&gt; Composite Thin Films