Abstract:Numerical methods are used to analyze the flow properties and thermal fields of a fan-coupled jet impingement. The shear stress transport(SST) k − ω model has been utilized in the numerical simulation conducted in ANSYS CFX. Initially, the study focuses on flow structures that are driven by pressure gradients. Due to the presence of the pressure gradient, there is a tip leakage vortex moving through the tip gap. In the vicinity of the hub, the boundary layer rolls up to form a passage vortex close to the blade. The presence of these secondary flow structures affects the features of the cooling flow provided by the axial fan. Velocity deficit and high turbulence exist in the regions as a result of the secondary flow structures. Furthermore, to demonstrate how the 3D structures affect the performance of the jet impingement, two comparison cases, named LF-Q and LF-curve, are introduced with uniform incoming flow. In the comparison cases, the axial fan is abstracted as a solid body with pressure rise and flow rate. Compared to the counterparts with uniform incoming flow, the fan-coupled jet shows a greater re-circulation and a narrower main jet as a result of the velocity deficit exiting near the hub. In terms of thermal performance, the fan-coupled jet outperforms a uniform impinging jet with the same flow rate by 1.18 times in total heat transfer. The velocity deficit and larger re-circulation have reduced the heat transport in the central target, while the mainstream with high velocity and strong turbulence has enhanced the heat transfer in the outer region. The fan-coupled jet impingement with high velocity in the narrower jet also shows improved local heat transfer, with a peak Nusselt number ( Nu ) approximately 1.37 times larger than that of the uniform case with the same flow rate.

Studies of Computational Fluid Dynamics in the Flow Field of the AC Arc Heater

Numerical Study of Heat Flux Reduction Mechanism of the Counterflowing Jet in Rarefied Flows

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Studies of Computational Fluid Dynamics in the Flow Field of a High Velocity Wire Arc Spray Gun

Flow characteristics and thermal fields in fan-coupled jet impingement

A study of abrasive waterjet characteristics by CFD simulation

Digital Particle Imaging Velocimetre Experimental Study of the Jet-to-Crossflow in a T-Junction with a Sleeve Tube

HEAT TRANSFER AND FLUID FLOW FOR A THERMAL PLASMA JET IMPINGING NORMALLY ON A FLAT PLATE

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Flow Field Simulation Analysis of Air Arc Chamber in Low Voltage Apparatus

Numerical Study of the Plasma Region of High Velocity Wire-Arc Spray

HEAT TRANSFER WITH IMPINGING CIRCULAR FREE-SURFACE WATER JET

Numerical studies of fluid dynamics in the flow field of a Two - Wire - Arc spray gun

Study on thermodynamics and flow characteristics of jet condensate in subcooled flowing liquid

Numerical Analysis of Fluid Flow and Heat Transfer by Means of a Unified Model in a Direct Current Electric Arc Furnace

Experimental Study on Acoustic Characteristics of Jet Flame with Twin-fluid Air-blast Atomizing Burner

Numerical and experimental investigations on heat/mass transfer of slot-jet impingement in a rectangular cavity

CFD ANALYSIS OF FLOW PATTERN AND HEAT TRANSFER OF WATER JET INTO SUPERCRITICAL WATER ENVIRONMENT

Effect of Vapour Condensation on Hot Steam Ejector System of Supersonic Wind Tunnel

A numerical study of heat transfer effects and aerodynamic noise reduction in superheated steam flow passing a temperature and pressure regulation valve

SIMULATION OF H2/Ar THERMAL PLASMA JET REACTOR