Abstract:For low costs, numerical simulation is an effective method to reveal the internal mechanisms inside a thermal plasma torch. Various simulation models for studying the inside or outside characteristics of thermal plasma torches have been built and discussed. However, to reveal the inside mechanisms of thermal plasma torches under various working conditions to support the materials processing, more attention should be paid to building precise models of laminar plasma torches. Thus, based on the user-defined function (UDF) and user-defined scalar (UDS) of ANSYS Fluent software, the assumptions, governing equations, boundary conditions, and solving method were discussed in detail, and a corresponding numerical model of a homemade laminar plasma torch was first built. For verifying the effectiveness of the proposed numerical model and studying the influence of the gas components on the arc characteristics, the working conditions and experimental setups were introduced in sequence. Finally, the numerical and experimental results of the homemade laminar plasma torch were obtained and discussed in detail. The study results show that: 1 The axial temperature of the plasma torch could be divided into three sections along the axis: peak temperature area (10 mm < x < 20 mm), stable temperature area (20 mm < x < 62 mm) and decrease temperature area (62 mm < x < 95 mm). Under the same input conditions, when pure argon gas was used, the peak temperature at the outlet was reached at approximately 7590 K, while for pure nitrogen and 50%Ar + 50%N2, the corresponding peak temperatures were 6785 K and 7402.2 K, respectively. 2 The axial velocity of pure nitrogen is much higher than that of pure argon and 50%Ar + 50%N2, while that of pure argon and 50%Ar + 50%N2 has little difference. In addition, when nitrogen gas was used, the peak velocity at the outlet reached 185 m/s, whereas, for argon gas and 50%Ar + 50%N2, the corresponding peak velocities were 146 m/s and 169 m/s, respectively. 3 The simulated arc voltage trends under different working conditions are well in accordance with the experimental arc voltage trends.

SIMULATION OF H2/Ar THERMAL PLASMA JET REACTOR

CFD Simulation of a hydrogen/argon plasma jet reactor for coal pyrolysis

Numerical Simulation of the Entrained Flow Hydropyrolysis of Coal in Magnetically Rotating Plasma Reactor

Kinetic Modeling and Experimental Validation of the Pyrolysis of Propane in Hydrogen Plasma

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Optimization Simulation of Thermal Plasma Reactor for Acetylene Production from Coal

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Simulation Of Coal Conversion In Ar/H-2 Plasma Jet

Numerical Simulation of Heat Transfer and Fluid Flow of a Non-Equilibrium Argon Plasma Jet with Confined Wall

Optimization Simulation of Thermal Plasma Reactor for Coal Gasification

Process Development and Reactor Analysis of Coal Pyrolysis to Acetylene in Hydrogen Plasma Reactor

A 2-D Axisymmetric Magneto-Hydrodynamic Model of a DC Arc Plasma Torch and Its Solution Methodology

Modeling on the Momentum and Heat/Mass Transfer Characteristics of an Argon Plasma Jet Issuing into Air Surroundings and Interacting with a Counter-Injected Argon Jet

Modeling of the Arc Characteristics inside a Thermal Laminar Plasma Torch with Different Gas Components

HEAT TRANSFER AND FLUID FLOW FOR A THERMAL PLASMA JET IMPINGING NORMALLY ON A FLAT PLATE

Cross‐Scale Modeling and Simulation of Coal Pyrolysis to Acetylene in Hydrogen Plasma Reactors

Modeling and Simulation of Supercritical-Pressure Turbulent Heat Transfer of Aviation Kerosene with Detailed Pyrolytic Chemical Reactions

Numerical simulation of flow field and residence time of nanoparticles in a 1000-ton industrial multi-jet combustion reactor

Numerical Study of Methane to Acetylene Process in Novel Thermal Plasma Array Reactor

Understanding Coal/hydrocarbons Pyrolysis in Thermal Plasma Reactors by Thermodynamic Analysis

Flow simulation and optimization of plasma reactors for coal gasification