Abstract:In this study, the flow behavior and heat transfer characteristics of the liquid film on the hot wall by inclined jet impingement are experimentally studied in detail. The effects of jet parameters, such as jet inclination angle, impingement distance, jet Reynolds number ( Re j ), and nozzle diameter are explored. The liquid film flow is visualized using a high-speed camera, and the surface temperature and heat flux are obtained by solving the inverse heat conduction problem. The results indicate that the liquid film shape is strongly affected by jet inclination angle but is almost unaffected by other parameters. As the inclination angle increases, the liquid film shape changes from elliptical to fusiform. In addition, the onset, enhancement, and disappearance of boiling cause the expansion and contraction of liquid film. The splashing rate is barely affected by jet parameters and remains within the range of 80–95 % under all conditions. The propagation of wetting fronts exhibits anisotropy. Except for the impingement distance, the position of wetting fronts along y -axis direction displays a high dependence on all parameters. The Re j and nozzle diameter have a significant effect on the heat flux at the impingement point and parallel flow zone, while the jet inclination angle and impingement distance only effect the impingement point. The visualization image proves that the droplet impingement pattern is the main reason for the increase in heat flux at higher impingement distances. Optimizing jet parameters can promote the wall to enter the rapid cooling stage in advance and increase maximum heat flux, thereby improving the maximum cooling capacity of the jet. Finally, an empirical equation is proposed to predict the maximum Nusselt number.

Study on thermodynamics and flow characteristics of jet condensate in subcooled flowing liquid

Numerical investigation on submerged steam jet condensation in subcooled water flow in a restricted channel with the presence of non-condensable gas

Numerical study on flow and heat transfer characteristics of the double-hole jet in flowing liquid

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Interfacial Characteristics of Steam Jet Condensation in Crossflow of Water in a Vertical Pipe

Numerical simulation on the effect of non-condensable gas on direct contact condensation of steam jet in a narrow pipe

Investigation on Velocity Field Characteristics of Steam Jet Condensation in Crossflow of Water in Pipes

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

Numerical simulation of steam jet submerged in cold water with condensation

Experimental investigation on interface characteristics and heat transfer during bubble condensation in narrow rectangular channel

Effect of Vapour Condensation on Hot Steam Ejector System of Supersonic Wind Tunnel

Numerical Simulation of Flow Patterns and the Effect on Heat Flux During R32 Condensation in Microtube

A numerical study on oscillatory characteristics of unstable steam jet in water flow within a vertical pipe

Experimental study on heat transfer characteristics of steam underwater direct-contact condensation

Flow behavior and heat transfer characteristics of liquid film on vertical hot surface by inclined jet impingement

Interfacial Wave Behavior and Its Effect on the Flow and Condensation Heat Transfer in a Microtube

Flow And Heat Transfer Enhancement In Condensing Water Drops In Steam Flows

Study on laminar film-wise condensation for vapor flow in an inclined small/mini-diameter tube

Velocity field characteristics of the turbulent jet induced by direct contact condensation of steam jet in crossflow of water in a vertical pipe

Performance of non-equilibrium condensation flow in wet steam zone of steam turbine based on modified model

Visualization study of the influence of non-condensable gas on steam condensation heat transfer