Abstract:In the current study, ultra-hard TiC, TiN, and Ti(C,N) layers were in-situ formed on carbon steel substrate using pure titanium electrode via electro-spark deposition (ESD) in argon, nitrogen, argon/nitrogen, and air atmospheres. The synthesized coatings were characterized using various techniques, including FE-SEM/EDS, X-ray diffractometry, Raman spectroscopy, microhardness and nanoindentation tests, and surface roughness measurement. Also, a thermodynamic simulation was executed to estimate the phase-stability. Fe 5 C 2 , TiN, Fe 3 N, and Ti 2 O 3 were determined as the major phases formed under the argon, nitrogen, Ar/N 2 , and air atmospheres, respectively. The formation of martensite at the interface of the coating and substrate in all atmospheres indicates the capability of the ESD process for surface hardening. The observed discrepancies between the empirically formed phases and the thermodynamics prediction can be related to the non-equilibrium conditions of the ESD process. It was revealed that gaseous media such as argon and nitrogen serve as a protective/active environment in the titanium/steel system. It is proposed that the electro-sparking of titanium under the active nitrogen medium follows an avalanche plasma regime. Under the argon flow, FeTi intermetallic layer is formed. Whilst, electro-sparking in ambient air leads to the formation of various Fe-Ti-O compounds, as well as different TiO n oxides. On the other hand, the utilization of nitrogen gas during the ESD increases the surface roughness and the thickness of the coating, rather than the deposition under the argon flow, due to the extra heat of reactions . The dynamic reactions occur between pure titanium, nitrogen, carbon, and oxygen, leading to the initial formation of Ti(C,N) at the top surface, followed by the production of titanium oxides in the middle layer. The coexistence of the super-hard Ti(C,N) with a hardness of 3130 HV at the top surface and titanium nitrides beneath it in a gradient mode effectively impedes the crack propagation.

Synthesis of Nanocrystallineti (cxn1−x) Thick Films on Titanium by Plasma Electrolytic Carbonitriding

Specialized investigations on physical and morphological features of TiC thin films synthesized by PECVD method

Nanocrystalline Titanium Nitride Films Prepared by Electrophoretic Deposition

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Microstructure and Mechanical Properties of Titanium Nitride Coatings for Cemented Carbide Cutting Tools by Pulsed High Energy Density Plasma

Synthesis of nanocrystalline titanium nitride coatings from the plasma of a composite-cathode arc discharge

The Study of Pd Film Layer Deposited on Surface of Pure Titanium by Arc Ion Plating Technology

Composition and Texture of TiN Thin Films Fabricated by ECR Enhanced Sputtering Deposition

Growth of Ni/Co-catalyzed crystalline CNx thin films by nitrogen-plasma-assisted pulsed laser deposition

Facile synthesis of homogeneously dispersed carbon nanotubes on TC4 alloy powder by in-situ CVD and its growth behavior

Electron-Spectroscopy Study Of Amorphous Cn : Ti Films

Microstructure and mechanical properties of CrN films fabricated by high power pulsed magnetron discharge plasma immersion ion implantation and deposition

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals

Synthesis of Crystalline C3N4 by MPCVD

Plasma Spray Deposition Enhancement of Titanium Nitride Layer Using Nitrogen-Contained Plasma Irradiation of Titanium Substrate as a Pre-spraying Method

In-situ formation of ultra-hard titanium-based composite coatings on carbon steel through electro-spark deposition in different gas media

Ti(C,N) Hard Coatings Prepared by Pulsed High Energy Density Plasma

Characterization of TiN, TiC and TiCN coatings on Ti–50.6 at.% Ni alloy deposited by PIII and deposition technique

Synthesis of Nanocrystalline Carbon Nitride Films by Glow Discharge Plasma Beam Deposition

Characterization and electrochemical behavior of a multilayer-structured Ti–N layer produced by plasma nitriding of electron beam melting TC4 alloy in Hank's solution

Plasma synthesis of titanium nitride, carbide and carbonitride nanoparticles by means of reactive anodic arc evaporation from solid titanium