Abstract:<p>In this paper, we demonstrate the combination of machine learning and three dimensional numerical simulations for multi-objective optimization of low pressure die casting. The cooling of molten metal inside the mold is achieved typically by passing water through the cooling lines in the die. Depending on the cooling line location, coolant flow rate and die geometry, nonuniform temperatures are imposed on the molten metal at the mold wall. This boundary condition along with the initial molten metal temperature affect the product quality quantified in terms of micro-structure parameters and yield strength. A finite volume based numerical solver is used to determine the temperature-time history and correlate the inputs to outputs. The objective of this research is to develop and demonstrate a procedure to obtain the initial and wall temperatures so as to optimize the product quality. The non-dominated sorting genetic algorithm (NSGA-II) is used for multi-objective optimization in this work. The number of function evaluations required for NSGA-II can be of the order of millions and hence, the finite volume solver cannot be used directly for optimization. Therefore, a multilayer perceptron feed-forward neural network is first trained using the results from the numerical solution of the fluid flow and energy equations and is subsequently used as a surrogate model. As an assessment, simplified versions of the actual problem are designed to first verify results of the genetic algorithm. An innovative local sensitivity based approach is then used to rank the final Pareto optimal solutions and select a single best design.</p>

Optimization of Slow Shot Parameters in a Die Casting Process by Numerical Simulation Technique

Numerical simulation and optimization of liquid metal flow in the shot sleeve of cold chamber die casting process

Study on the Effects of the Slow Shot Phase on the Flow Patterns of Die-Casting Mold Filling Process

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Numerical Simulation on the Liquid Metal Flow of the Acceleration Phase in the Shot Sleeve of Cold Chamber Die Casting Process

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

The Numerical Simulation of Flow Field of the Slow Shot Phase in the Shot Sleeve

Water Analogue Validation of Numerical Model for Fluid Flow During Slow Shot Phase in Die Casting Process

Optimization of Low-Pressure Die Casting Process with Soft Computing

3D Numerical Simulation of Temperature Field Coupled with Flow Field of the Liquid Metal in Shot Sleeve of Die Casting Process

Numerical Simulation and Optimization of Casting Process for Complex Pump

Examination of Variable Tilting Speed on Flow Behavior During Ladle Pouring in Die Casting Using SPH Simulation

The optimization accuracy control of a die-casting product part

Design and Optimization of Runner and Gating Systems for Vacuum Die Casting of Magnesium Through Numerical Simulation

Improving the quality of die castings through optimal plunger motion planning: analytical computation and experimental validation

Parallel Computation Technique for Mold Filling Simulation of Die Casting Process by Optimizing the Computational Parameters

Finite element analysis for die casting parameters in high-pressure die casting process

Numerical Simulation of Die-Casting Mold Filling Process Based on Fractional Step Method

Optimization of solidification in die casting using numerical simulations and machine learning

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings