Abstract:Ultrahigh‐speed casting is the most remarkable feature of billet high‐efficiency continuous casting. The transient fluid flow, heat transfer, and solidification behavior under different casting speeds, submerged entry nozzle (SEN) parameters, and mold electromagnetic stirring (M‐EMS) are investigated using a 3D transient mathematical model. The results show that a typical roll flow pattern is generated for all casting speeds, while a third small recirculation zone developed near the solidified shell at the casting speed of 6.0 m min−1. When the casting speed increases, the impact depth of the molten steel increases from 0.748 to 0.844 m, the velocity and level fluctuation at the steel/slag interface increases, the high‐temperature zone moves downward, and the shell thickness is reduced from 16.2 to 11.1 mm. As the SEN inner diameter and immersion depth increases, the impact depth increases, the velocity and level fluctuation at the steel/slag interface decreases, and the shell thickness at the mold exit is ≈11.0 mm. When the SEN immersion depth and inner diameter are 120 and 40 mm, respectively, the flow and temperature fields in the mold are the most appropriate. In addition, the M‐EMS have a great effect on the fluid flow and heat transfer behavior. A coupled 3D numerical model is established to study the fluid flow, heat transfer, and solidification in a billet continuous casting mold under different casting speeds, submerged entry nozzle (SEN) inner diameters, SEN immersion depths, and mold electromagnetic stirring (M‐EMS). The velocity field, temperature field, steel/slag level fluctuation, and the growth of solidified shell are analyzed comparatively.

Numerical Simulation on the Liquid Metal Flow of the Acceleration Phase in the Shot Sleeve of Cold Chamber Die Casting Process

Numerical simulation and optimization of liquid metal flow in the shot sleeve of cold chamber die casting process

3D Numerical Simulation of Temperature Field Coupled with Flow Field of the Liquid Metal in Shot Sleeve of Die Casting Process

Water Analogue Validation of Numerical Model for Fluid Flow During Slow Shot Phase in Die Casting Process

Optimization of Slow Shot Parameters in a Die Casting Process by Numerical Simulation Technique

The Numerical Simulation of Flow Field of the Slow Shot Phase in the Shot Sleeve

Study on the Effects of the Slow Shot Phase on the Flow Patterns of Die-Casting Mold Filling Process

On Determining the Critical Velocity in the Shot Sleeve of a High-Pressure Die Casting Machine Using Open Source CFD

Study on Numerical Simulation of Mold Filling and Heat Transfer in Die Casting Process

Numerical Simulation of Fluid Flow and Heat Transfer During Mold Filling for Die Casting

Development and Application of Inverse Heat Transfer Model Between Liquid Metal and Shot Sleeve in High Pressure Die Casting Process under Non-Shooting Condition

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Multiphase modelling of the transient flow for Sn-15Pb and 357.0 alloys in semi-solid die casting process

Numerical Simulation of the Flow Field in an Ultrahigh-Speed Continuous Casting Billet Mold

Examination of Variable Tilting Speed on Flow Behavior During Ladle Pouring in Die Casting Using SPH Simulation

An Improved Mathematical Model to Simulate Mold Filling Process in High Pressure Die Casting Using CLSVOF Method and CSF Model

Three-dimensional FEM Study of Fluid Flow in Mould for Beam Blank Continuous Casting: Influence of Nozzle Structure and Parameters on Fluid Flow

Numerical Simulation of Die-Casting Mold Filling Process Based on Fractional Step Method

Numerical Simulation of the Fluid Flow, Heat Transfer, and Solidification in Ultrahigh Speed Continuous Casting Billet Mold

Study on the Influence of Injection Velocity on the Evolution of Hole Defects in Die-Cast Aluminum Alloy

Numerical Simulation on Free Surface in the Mold of Slab Continuous Caster at Low Casting Speed with MFCD