Abstract:The filling stage in injection/infusion moulding processes plays a key role in composite manufacturing that can be influenced by the inlet and vent ports. This will affect the production of void-free parts and the desirable process time. Flow control is usually required in experiments to optimise such a stage; however, numerical simulations can be alternatively used to predict manufacturing-induced deficiencies and potentially remove them in the actual experiments. This study uses ANSYS Fluent software to model flow-front advancement during the impregnation of woven fabrics. A developed technique is applied by creating tracking points (e.g., on-line monitor) in the direction of the flow to report/collect data for flow-front positions as a function of time. The study adopts the FVM-VOF-based two-phase flow model together with an implicit time-stepping scheme, i.e., a dual-time formulation solution method with a preconditioned pseudo-time derivative. Initially, three time-step sizes, 5 s (small), 25 s, and 50 s (large), are evaluated to examine their impact on numerical saturation lines at various fabric porosities, 40%, 50%, and 60%, for a two-dimensional (2D) rectangular mould, and predictions are then compared with the well-known analytical Darcy. This is followed by a three-dimensional (3D) curved mould for a fillet L-shaped structure, wherein the degree-of-curvature of fibre preforms is incorporated using a User-Defined Function (UDF) to tailor the impregnation process. The developed approach shows its validation (1–5.7%) with theoretical calculations and experimental data for 2D and 3D cases, respectively. The results also stress that a shorter computational time can be achieved with a large time-step size while maintaining the same level of accuracy.

Numerical Simulation of Die-Casting Mold Filling Process Based on Fractional Step Method

Numerical simulation of filling flow of polymer melt in injection molding

Numerical Simulation of Fluid Flow and Heat Transfer During Mold Filling for Die Casting

Study on Numerical Simulation of Mold Filling and Heat Transfer in Die Casting Process

Numerical simulation of mold filling of casting with an improved SOLA-VOF method

Numerical Simulation of Air Entrapment Phenomenon During Mold Filling of High Pressure Die Casting Process

Numerical simulation of flow-induced air entrapment defects in the high pressure die casting process

Study on numerical simulation of mold-filling and solidification processes of shaped casting

An Improved Mathematical Model to Simulate Mold Filling Process in High Pressure Die Casting Using CLSVOF Method and CSF Model

Study and Application of Mold Filling Simulation of Shaped Castings

Numerical Simulation of Multiphase Flow in Steel Continuous Casting Mold Using a Novel Euler–Euler–Lagrange Method

Numerical Simulation of Mold Filling and Solidification of a Nickel Alloy Vane Investment Casting

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

The Numerical Simulation of Flow Field of the Slow Shot Phase in the Shot Sleeve

Progress on Numerical Simulation of Mold Filling and Solidification Processes of Shaped Castings

Numerical Simulation of Casting Filling Process of Composites Reinforced with Nano SiC Based on Smoothed Particle Hydrodynamics

Water Analogue Validation of Numerical Model for Fluid Flow During Slow Shot Phase in Die Casting Process

Numerical simulation and optimization of liquid metal flow in the shot sleeve of cold chamber die casting process

Numerical Simulation and the Application for Filling Process of Expendable Polystyrene Beads in Lost-foam Casting

Numerical Simulation of Two-Phase Flow in Liquid Composite Moulding Using VOF-Based Implicit Time-Stepping Scheme

Modelling and Simulation for Die Casting Mould Filling Process Using Cartesian Cut Cell Approach