Abstract:The presence of natural convection during solidification of alloys significantly influences the heat and mass transfer processes in the liquid phase, and thus affecting the nucleation and growth behaviors of grains. It is crucial to understand the impacts of thermo-solutal convection on the solidification process to control the final properties of casting ingots. In this study, the directional solidification of Al-15 wt.% Cu alloy under different temperature gradients has been in-situ observed using synchrotron radiation X-ray radiography. The solute distribution in the field of view (FOV) and three dimensional solid microstructure are obtained by our proposed image processing technique, which aims to determine the permeability and solutal Rayleigh number in the mushy zone over time. Then the interplay between the thermo-solutal flow and microstructure is quantitatively studied. Results indicate the solute elements are periodically discharged out of and confined to the mushy zone owing to the solutal instability in the mushy zone, which results in the periodic oscillation of solute concentration. Therefore, the oscillatory constitutional undercooling gives rise to the intermittent nucleation and periodic growth of grains, which in turn cause the periodic oscillation of permeability and the associated solutal Rayleigh number, thereby in turn resulting in the oscillation of solute concentration. Moreover, owing to the superposed solute flow and convective flow, the oscillation amplitudes of solute concentration and nucleation number vary in a sinusoidal manner in general.

Effects of specimen dimensions on directional solidification microstructure and interface stability of Al-4.5%Cu alloy

The Effect of Convection on Microstructures and Interface Stability of Al-4.5wtpctCu Alloy Made by Directional Solidification

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Effect of Sample Size on Solid/liquid Interfacial Characteristic in Directional Solidification of Al-4%Cu Alloy

Spatio-temporal Microstructure Evolution in Directional Solidification Processes

Non-axially Oriented Dendritic Microstructures and Their Mechanical Characteristics of Single-Crystal Al-4.5%Cu Alloy

Effect of Sample Size on Intermetallic Al2Cu Microstructure and Orientation Evolution During Directional Solidification

Effect of Al-Cu Alloys Diameter on Thermal Gradient and Primary Dendrite Arm Spacing During Directional Solidification

Ultrasounds Induced Microstructure Transition and Improved Mechanical Property of Directionally Solidified Ternary Cu–Al–Ni Alloy

Effect of Variation in Cross-Section Size of Samples on Directional Solidification Microstructure of DZ125 Superalloy

Microstructure Evolution of Directionally Solidified Al-Cu Alloys

Effect of thermosolutal convection on microstructure of directionally solidified Al-Al2Cu hypereutectic alloy

Interfacial morphology evolution in directionally solidified Al-1.5%Cu alloy

Effects of Solidification Parameters on Microstructures of Ni3Al Based Single Crystal

Intermittent nucleation and periodic growth of grains under thermo-solutal convection during directional solidification of Al-Cu alloy

Microstructure Evolution of Cu-Pb Monotectic Alloys During Directional Solidification

Numerical Simulation of Microstructure Evolution During Directional Solidification of Ti-45at. % Al Alloy

Effect of currents on the microstructure of directionally solidified Al–4.5 wt% Cu alloy

Influence of Different Growth Velocities on Directional Solidification Microstructure of Ti-45%Al Peritectic Alloy

Characterization of Microstructures and Growth Orientation Deviating of Al2Cu Phase Dendrite at Different Directional Solidification Rates

Flow Field and Its Effect on Microstructure in Cold Crucible Directional Solidification of Nb Containing TiAl Alloy