Abstract:Intermetallics combining metal and ceramic properties exhibit colorfully complicated growth morphologies in solidification. Different from the solidus phase solidification, intermetallic solidification remains less understanding of the correlation between processing parameters and microstructure morphologies. In this paper, considering that; the intermetallic compound Al2Cu phase has well-known thermophysical properties available for the theoretical and experimental research, we carried out the directional solidification experiments and focused on an Al-Al2Cu hypereutectic alloy, where the Al2Cu phase was solidified as a primary phase. The primary Al2Cu phase growth behavior in the experiments included phase competition growth between coupled eutectic and primary phase, faceted phase transition and its change in growth morphology. By using a high thermal gradient directional solidification apparatus, the directionally solidified microstructures of Al-40%Cu (mass fraction) hypereutectic alloy were investigated and discussed based on the competition growth model. As the growth rate was changed abruptly from 10 mu m/s to 2 mu m/s, the microstructure transition from a primary Al2Cu dendrite plus interdendritic eutectic to an entirely coupled eutectic occurred due to the interface growth temperature of the coupled eutectic exceeding that of the primary Al2Cu dendrite. Also, the alloy liquid composition ahead of the solid/liquid interface approaching the eutectic point caused this microstructure transition. Simultaneously, in the changing growth rate experiments. the primary Al2Cu dendrites were firstly broken into small ones and then became the eutectic microstructure; it was interpreted rather by the decrease in liquid solute concentration ahead of the solid/liquid interface than by the effect of the thermal-solutal convection. Moreover, the morphology change in phase growth from faceted primary Al2Cu phase to non-faceted phase was observed by reducing abruptly the growth rate from 10 mu m/s to 2 mu m/s, which can be explained by the Jackson factor alpha decreasing with increasing the interface growth temperature of primary Al2Cu phase.

Effect of thermosolutal convection on microstructure of directionally solidified Al-Al2Cu hypereutectic alloy

Effect of Directional Solidification Methods on Solid Solution Window in Ni-based Single-Crystal Superalloy

Effect Of Directional Solidification Rate On Microstructure And Orientation Of Hypereutectic Al-Al2cu Alloy

THERMOSOLUTAL CONVECTION DURING DIRECTIONAL SOLIDIFICATION OF Al-Li ALLOYS

Effect of Composition on the Microstructure of Directionally Solidified Al-In Monotectic Alloy with High Temperature Gradient

Microstructure Evolution and Orientation Analysis of Hypereutectic Al-Al2cu Alloy under Directional Solidification

A Triple Comparative Study of Primary Dendrite Growth and Peritectic Solidification Mechanism for Undercooled Liquid Fe59ti41 Alloy

EFFECT OF AN ABRUPT GROWTH RATE ON PRIMARY Al_2Cu PHASE IN DIRECTIONAL SOLIDIFICATION OF Al-40%Cu HYPEREUTECTIC ALLOY

Primary Dendrite Growth Kinetics and Rapid Solidification Mechanism of Highly Undercooled Ti-Al Alloys

Effect of Solidification Rate on Microstructures and Orientations of Al‐Cu Hypereutectic Alloy in Thin Crucible

EFFECT OF LONGITUDINAL MAGNETIC FIELD ON THE MICROSTRUCTURE OF DIRECTIONALLY SOLIDIFIED Al-40%Cu HYPEREUTECTIC ALLOY

Microstructure Evolution of Directionally Solidified Al-Cu Alloys

Three-Dimensional Microstructure Reconstruction and the Eutectic Spacing Adjustment During Directional Solidification of Al-40%Cu Hypereutectic Alloy

Band Structure Formation Mechanism in Directionally Solidified Al-38.5%Cu Alloy

Effects of specimen dimensions on directional solidification microstructure and interface stability of Al-4.5%Cu alloy

A Study on Directional Solidification of in Situ Cu 0 8cr Alloy

Numerical Simulation of Microstructure Evolution During Directional Solidification of Ti-45at. % Al Alloy

Analysis on Microstructure of Al-40%Cu Alloy in Directional Solidification Process

Numerical Simulation of Effect of Thermal Gradient on Structure Evolution During Directional Solidification of Ti-Al Alloy

Effect of a Transverse Magnetic Field on Solidification Structure in Directionally Solidified Al-40 Wt% Cu Alloys

Effect of the Solidification Rate on the Microstructure of Directionally Solidified Al-17.5wt%In Alloy in High Temperature Gradient