Abstract:Dendrite is a fundamental growth pattern in alloy solidification.Normally,dendrites with a specific growth orientation which can remarkably influence casting properties have attracted many great interests.The previous investigations mainly focus on the growth of simple monophase dendrites solid solution.For complex intermetallics in solidification,the correlation between processing parameters and microstructure morphologies with the preferred growth directions has not been shed a light.In this work,considering intermetallic Al2 Cu phase has crystalline anisotropy and can exhibit colorfully complicated growth morphologies with specific growth direction in different solidification conditions,the primary Al2 Cu phase growth behavior of Al-40%Cu(mass fraction) hypereutectic alloy was investigated by using a high thermal gradient directional solidification apparatus.The Al2 Cu phase growth behavior in the experiments included its change in growth morphology and orientation transition.With solidification distance increasing,due to the alloy liquid composition ahead of the solid/liquid interface approaching the eutectic point,the primary Al2 Cu dendrite transited from regular faceted V-shaped morphology to the entirely coupled eutectic at 10 μm/s.Its growth direction changed from [110] direction to the normal direction of(121) plane.The EBSD result indicated that the [001] direction of Al2 Cu phase was along the direction of heat flux.As the growth rate was changed abruptly from 10 to 2 μm/s,the alloy liquid composition ahead of the solid/liquid interface increased firstly and then decreased to the eutectic point.It caused that the primary Al2 Cu dendrite transited from regular faceted V-shaped morphology to long smooth lath morphology,and finally disappeared to form the entirely coupled eutectic.Moreover,the growth direction of Al2 Cu phase changed from [110] direction to [001] direction.The experimental results show that the directional solidification process parameter is the dominant factor affecting the final morphology and growth direction of dendrites.

Microstructural evolution and microsegregation in directional solidification of hypoeutectic Al−Cu alloy: A comparison between experimental data and numerical results obtained via phase-field model

Phase-Field Simulation of Microsegregation and Dendritic Growth During Solidification of Hypoeutectic Al-Cu alloys

Phase-field Model Simulations of Alloy Directional Solidification and Seaweed-Like Microstructure Evolution Based on Adaptive Finite Element Method

Simulation for microstructure evolution of Al-Si alloys in solidification process

Simulation of Isothermal Solidification of Ternary Alloy with Phase-Field Model

Phase-Field Simulation of Microstructure Evolution in Industrial A2214 Alloy During Solidification

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Study Progress in Phase-field Simulation of Directional Solidification Microstructure

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Numerical Simulation of Recalescence of 3-Dimensional Isothermal Solidification for Binary Alloy Using Phase-Field Approach

Phase-field Simulation of Isothermal Solidification of Ternary Alloy Based on KKS Model

Numerical Simulation of Solute Segregation Patterns for a Binary Alloy Using Phase-Field Approach

Three Dimensional Numerical Simulation of Solidification Microstructure of Single Phase Alloy

Phase Field Modeling for Dendritic Morphology Transition and Micro-Segregation in Multi-Component Alloys

Development and Numerical Testing of a Model of Equiaxed Alloy Solidification Using a Phase Field Formulation

Phase-Field Simulation of Directional Solidification Microstructure Evolution in A Binary Alloy

Effect Of Directional Solidification Rate On Microstructure And Orientation Of Hypereutectic Al-Al2cu Alloy

Simulation on microstructure evolution of Al−Si alloy under effect of natural convection during solidification

Microstructure Evolution and Orientation Analysis of Hypereutectic Al-Al2cu Alloy under Directional Solidification

Modeling Dendrite Coarsening and Remelting during Directional Solidification of Al-06wt.%Cu Alloy

Phase Field Simulation Of The Columnar Dendritic Growth And Microsegregation In A Binary Alloy