Abstract:Topology optimization as a computational approach is used to find an optimal structure with specific objectives such as an ultimately lightweight design. The optimization is normally performed under a series of constraint functions to ensure expected structural performance for safety and resilience. To promote the use of topology optimization in structural engineering, it is crucially important to identify and apply suitable constraints for realistic construction. In this paper, a conceptual attempt aiming for a construction-oriented topology optimization framework is presented. An isogeometric analysis module using NURBS curves for geometric description and discretization is employed in stress analyses, which incorporates the density-based SIMP optimization approach to generate the optimized topology. A Drucker–Prager criterion is adopted to constrain the stresses within the unequal limits of tension and compression for the use of concrete type material. To prevent slim components of potentially high complexity in construction, a minimum-width control is applied as an additional geometric control. In this paper, the conceptual framework is demonstrated using a prestressed concrete beam, while the optimization is performed to find suitable density distribution of concrete and a NURBS-described tendon profile after imposing the mapped prestressed action. The iterative optimization processes are presented and demonstrated to investigate the effect of tensile-compressive strength ratio and the minimum width, which reflects the construction-oriented vision pursuing a more regularized topology after applying the constraints in optimization.

The Optimal Control of Structural Shape for Cantilever Construction Continuous Beam Bridge Based on Lagrange Multiplier Method

Research on simultaneous control of force and shape for adaptive cable-strut tensile structures

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

THE INFLUENCE OF LINEAR AND NON LINEAR FACTORS ON THE CONSTRUCTION CONTROL ANALYSIS OF CABLE-STAYED BRIDGES

OPTIMIZATION OF STAYED-BUCKLE CABLE FORCES DURING ADJUSTMENT OF THE LINE-SHAPE ON LONG SPAN ARCH BRIDGE

Isogeometric Analysis-Based Design of Post-Tensioned Concrete Beam Towards Construction-Oriented Topology Optimization

Research on force control theory of adaptive beam sting structure

Asymmetric Cantilever Construction Control of a U-Shaped Box Concrete Continuous Bridge in Complex Environment

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Construction Control of Long Span Continuous Rigid Frame Bridges Based on Optimum Level of Construction Completion Evaluation

Cantilever-casting Control of Prestressed Concrete Cable-Stayed Bridge

Integral Lifting of a Three-Span Continuous Beam Bridge

Study of construction control for Heigou Super-large Bridge in Inner Mongolia

Cable prestress and alignment double control during construction of large-span cable-stayed bridges

Optimization of Mechanical Behavior of Steel and Concrete Continuous Composite Truss Girder Bridge

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Simulating analysis of cantilever casting of prestressed concrete bridge

FINITE ELEMENT SIMULATION ANALYSIS OF CURVILINEAR CONTINUOUS BEAM BRIDGE JACKING AND TRANSLATION CONSTRUCTION

Method Suitable for Updating the Boundary Condition of Continuous Beam Bridges

Application of Bayesian Update Method in the Construction Control of Continuous Rigid Frame Bridge Girders with High Piers and Large Spans

Study On Optimal Construction Method For Lower Beam Of Cable-Stayed Bridge Towers