Abstract:The strength‐toughness and microstructure evolution of high‐strength and heat‐resistant stainless steel with different Cr contents (8, 10, and 13.5%) are investigated by tensile and fracture toughness test. The increase of Cr content enhances the toughness and decreases the lattice misfit between ferric matrix and M2C precipitates, reducing the coherency strengthening. The effect of Cr content on the microstructure and mechanical properties of CSS‐42L steel is investigated by X‐ray diffractometer, scanning electron microscopy, and transmission electron microscopy. The results show that increasing Cr from 8% to 13.5% significantly improves toughness and ductility while moderately decreasing the strength. The tensile strength, fracture toughness (KIC), and impact absorbing energy of 13.5% Cr steel are 1.8 GPa, 88.6 MPa√m, and 58.5 J, respectively. 13.5%Cr steel possesses larger grain size and fewer undissolved M6C carbides than 8%Cr and10%Cr steels, which is attributed to that Cr addition increases Cr content in the (Mo,Cr)6C, reducing the dissolution temperature and ability to inhibit grain growth. Cr significantly decreases the Martensite start (Ms) temperature from 263 to 53.1 °C and increases the retained austenite from 0.3 to 13.19 vol%. Cr increases the number density and diameter of nanoscale M2C, which is attributed to Cr promoting the dissolution of Mo and increasing the nucleation rate. Meanwhile, the higher Cr content also increases the growth rate of the carbides along the diameter direction. Cr addition reduces the contribution from coherency strengthening caused by decreased lattice misfit and increased the contribution of Orowan dislocation looping resulted from higher volume fraction and size of M2C.

Microstructure and Wear-Resisting Properties of 2cr13 Stainless Steel Strengthened by In-Situ TiC Dispersion

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

Microstructure, Mechanical Properties and Wear Resistance of Low Alloy Abrasion Resistant Martensitic Steel Reinforced with TiC Particles

Role and mechanism of innovative addition process of trace nano-TiC p in microstructure manipulation and significant mechanical properties enhancement of H13 steels

Effect of TiC addition on the microstructure and properties of Ni3Ta–TaC reinforced Ni-based wear-resistant coating

Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr 2 AlC-Ti system

Preparation, Microstructure and Mechanical Properties of In-Situ TiC/Al–Si–Fe Aluminum Matrix Composites

Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites

Microstructure manipulation mechanism and mechanical properties improvement of H13 steel via trace nano-(TiC + TiB2) particles

Microstructural evolution, mechanical properties and wear behavior of in-situ TiC-reinforced Ti matrix composite coating by induction cladding

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Precipitation Behavior and Strengthening Effect of (Ti,Mo)C Particles in a Martensitic Steel

Effect of Cr on the Microstructure and Strength‐Toughness of High‐Strength and Heat‐Resistant Stainless Steel

Wear-Resistant TiC Strengthening CoCrNi-Based High-Entropy Alloy Composite

TiC-Reinforced Austenitic Stainless Steel Laser Cladding Layer on 27SiMn Steel Surface: A Comparative Study of Microstructure, Corrosion, Hardness, and Wear Performance

In-Situ Synthesis, Microstructure, and Mechanical Properties of TiB2-Reinforced Fe-Cr-Mn-Al Steel Matrix Composites Prepared by Spark Plasma Sintering

Microstructure evolution, mechanical properties, and wear behavior of in-situ TiCx/TC4 composites

Design, fabrication, microstructure and properties of in-situ synthesized TiC reinforced stainless steel matrix composite coating by laser cladding

Effect of Solidification and Hot Rolling Processes on Wear Performance of TiC-Reinforced Wear-Resistant Steel

Increased tensile strength and elongation of the Ni–Fe based polycrystalline cast superalloy via the trace addition of TiC nanoparticles

Dry Sliding Wear Properties of Annealed Carbon Steels Matrix Composites by Nanosized TiC‐TiB2 Particles