Abstract:A series of ZrO2 and polymer doped-ZrO2 sols have been synthesized by the controlled hydrolysis of zirconium n-propoxide. Acetic acid was used as the chelating agent. Poly(ethylene glycol)(PEG) 200 and polyvinylpyrrolidone(PVP) were introduced to produce the hybrid sols. ZrO2 and the polymer doped-ZrO2 optical thin films were then prepared by spin-coating the stable sols on K9 glass substrates. Effects of various synthetic parameters were studied, on the sol stability, the microstructure of colloidal system, the structural and optical properties of the films, as well as the laser damage resistance. In our reaction systems, both hydrolysis and chelation coexist. The preference for any of the two reactions strongly depends on the system composition and ultimately determines the stability and microstructure of the colloidal system. Besides, the addition of a proper amount of PEG200 and PVP, which probably acts as the competitive ligands, particle surface protective polymers and structure directive agents, can modify the hydrolysis-condensation process, thus producing more stable, uniform sols with mass fractal structure (fm=2.33—2.46) and average particle diameter of 19.1—23.7nm. Benefiting from the precursor sol structure, the polymer doped-films exhibit excellent surface planarity and uniform inner structure, which endows the films with good optical property and excellent laser damage resistance. For instance, the hybrid film with 10% PEG200 and 15% PVP (mass fractions) showed a high laser damage threshold of 24.5J/cm2 (for 1ns pulse duration) and a reflectivity increase of about 2% than that of the substrate at wavelength of about 1000nm.

Comparison of Laser-Induced Damage of Monolayer ZrO2 Films Preparated by PVD and Sol-Gel Methods

Contrast Study of Laser-induced Damage of Monolayer SiO2 and ZrO2 Films

Experimental research of laser-induced damage of the monolayer ZrO2 PVD and sol–gel films

Influence of Porosity on Laser Damage Threshold of Sol–gel ZrO2 and SiO2 Monolayer Films

Effect of porosity on the laser induced damage threshold of sol-gel SiO2 and ZrO2 single layer films

Comparative studies of laser-induced damage of several single-layer optical films

Modification and Laser-Damage Resistance of Zirconia Thin Films

Preparation of Sol–gel ZrO2–SiO2 Highly Reflective Multilayer Films and Laser-Induced Damage Threshold Characteristic

Laser-induced Damage of Sol-Gel Silica Acid and Basic Thin Films

Laser-induced damage mechanism of the sol–gel single-layer SiO2 acid and base thin films

Sol-gel Processing of ZrO2 and Polymer Doped-Zro2 Monolayer Reflective Films with High Laser Damage Threshold

Relationship Between Micro-Structure And Laser Damage Threshold Of Nano-Zro2 Films

Experimental Research of Laser-Induced Damage Mechanism of the Sol-Gel SiO2 and IBSD SiO2 Thin Films

Laser-induced damage threshold of ZrO2 thin films prepared at different oxygen partial pressures by electron-beam evaporation

Influencing factors in the laser-induced damage threshold of Ta2O5 films prepared with different methods

Preparation of Sol-Gel ZrO2 Films with High Laser-Induced Damage Threshold under High Temperature

Studies on Micro-Structure of Nano-ZrO2 Films

Sol-Gel Processing of Zirconia Coating for HR Mirrors with High Laser Damage Threshold

Effect of UV-Irradiation on Sol-Gel Optical Films

Laser-Induced Damage on Ordered and Amorphous Sol-Gel Silica Coatings

Preparation of Zirconia Thin Films Via Sol-Gel Process from Inorganic Precursor