Abstract:As the competition intensifies in enhancing the integration and performance of integrated circuits, in accordance with the famous Moore's Law, higher performance and smaller size requirements are imposed on the dielectric layers in electronic devices. Compared to vacuum methods, the production cost of preparing dielectric layers via solution methods is lower, and the preparation cycle is shorter. This paper utilizes a low-temperature self-exothermic reaction based on the solution method to prepare high-performance Al2O3 dielectric thin films that are compatible with flexible substrates. In this paper, we first established two non-self-exothermic systems: one with pure aluminum nitrate and one with pure aluminum acetylacetonate. Additionally, we set up one self-exothermic system where aluminum nitrate and aluminum acetylacetonate were mixed in a 1:1 ratio. Tests revealed that the leakage current density and dielectric constant of the self-exothermic system devices were significantly optimized compared to the two non-self-exothermic system devices, indicating that the self-exothermic reaction can effectively improve the quality of the dielectric film. This paper further established two self-exothermic systems with aluminum nitrate and aluminum acetylacetonate mixed in 2:1 and 1:2 ratios, respectively, for comparison. The results indicate that as the proportion of aluminum nitrate increases, the overall dielectric performance of the devices improves. The best overall performance occurs when aluminum nitrate and aluminum acetylacetonate are mixed in a ratio of 2:1: The film surface is smooth without cracks; the surface roughness is 0.747 ± 0.045 nm; the visible light transmittance reaches up to 98%; on the basis of this film, MIM devices were fabricated, with tested leakage current density as low as 1.08 × 10-8 A/cm2 @1 MV and a relative dielectric constant as high as 8.61 ± 0.06, demonstrating excellent electrical performance.

Preparation and characteristics of insulator layers for field emission display device

Controlled Synthesis of High-Quality Monolayered Α-In2se3 Via Physical Vapor Deposition.

Optimization of Insulator Layer with High Breakdown Voltage for 10 Inch Nanowire Field Emission Display

Electrical Performance Determination and Stress Reliability Estimation of ALD- Derived Er2O3/InP Heterointerface

Investigation of a 4H—SiC metal—insulation—semiconductor structure with an Al2O3/SiO2 stacked dielectric

Inkjet-Printed Dielectric Layer for the Enhancement of Electrowetting Display Devices

Double-Gate-Driving Field Emission Display Panel with Stacked-Metalized-Aperture Structure

Interface Investigation on SiGe/Si Multilayer Structures: Influence of Different Epitaxial Process Conditions

Growth and interfacial properties of atomic layer deposited Al 0.7 Ti 0.3 O y high- k dielectric on Ge substrate

Study on Ultra-Thin Gate Dielectrics: Surface Preparation and Reliability

Interface State Density Modification and Dielectric Reliability Enhancement of ErTi x O y /Al 2 O 3 /InP Laminated Stacks

Vertically grown ultrathin Bi 2 SiO 5 as high- κ single-crystalline gate dielectric

Interface Optimization and Performance Enhancement of Er2O3-Based MOS Devices by ALD-Derived Al2O3 Passivation Layers and Annealing Treatment

Characterization of Hfo2/Al2o3 Gate Dielectric Nanometer-Stacks Grown by Atomic Layer Deposition on Ge Substrates

Polyethylene interfacial dielectric layer for organic semiconductor single crystal based field-effect transistors

P‐7.3: Study on Transmittance, Color Shift and Gamut of Dielectric Multi‐layers

Study of Interfacial Oxide Layer of LaAlO 3 Gate Dielectrics on Si for Metal–insulator–semiconductor Devices

Preparation of High-Performance Transparent Al2O3 Dielectric Films via Self-Exothermic Reaction Based on Solution Method and Applications

Research Progress of High Dielectric Constant Zirconia-Based Materials for Gate Dielectric Application

Growth and Characteristics of La2o3 Gate Dielectric Prepared by Low Pressure Metalorganic Chemical Vapor Deposition

Interface Chemistry and Defect State Optimization of the ErSmO/InP Heterojunction Modified by ALD-Driven Al 2 O 3 Interlayers