Abstract:Ice slurry has remarkable energy storage density due to significant amount of latent heat during phase change, making it a unique environmentally friendly alternative. This technology can be used for renewable cooling in buildings, foods, and medical products. Nanofluid ice slurry offers higher thermal conductivity and lower supercooling degree as compared to conventional ice slurry which improves its effectiveness in applications. Therefore, an efficient nanofluid ice slurry generator needs to be developed. In this study, a novel continuous nanofluid ice slurry generator is developed using an opposed nozzle impinging jet where Alumina (Al 2 O 3 ) nanofluid (ANF) impinged with cold air jet. To achieve an optimal thermal performance and maximize slurry production, a model of the slurry generator should be developed. To accomplish this, a novel mathematical framework incorporating multiscale nanofluid freezing, i.e. liquid supercooling, nucleation, recalescence, equilibrium freezing, and solid subcooling, along with a spray-droplet dynamics model is developed and validated against experimental data. The results suggest that the performance of the impinging jet nanofluid ice slurry generator is superior to that of the non-impinging counterpart (up to 3.4 times more ice produced). The addition of Alumina nanoparticle expedites freezing time by about 20%. The ice packing fraction was found to increase with nanofluid concentration and peak at concentration of 0.2 weight percentage. The ice packing fraction decreases with the increase of the initial temperatures of nanofluid and air. Conducting a parametric study, it is shown that the ice slurry production can be maximized via an appropriate selection of the generator size, spray pressure and configuration, and nanoparticle concentration.

Experimental study on collision-coalescence of drops in circulating fluidized bed for ice slurry production

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Collision Characterization of Mixed Hydrocarbon Liquid Droplets with Polyethylene Particles

Evolution and Fluidization Behaviors of Wet Agglomerates Based on Formation-Fragmentation Competition Mechanism

Analysis of Ice Slurry Production by Direct Contact Heat Transfer of Air and Water Solution

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Experimental study of double direct contact ice slurry generator

Research Developments and Applications of Ice Slurry

Ice Slurry Formation Based On Nanofluid And Hydrophobic Cooling Surface

Study on flow and heat transfer characteristics of salt solution ice slurry

Development of a novel continuous nanofluid ice slurry generator: Experimental and theoretical studies

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Experimental Investigation of the Sedimentation Behavior of Metal Droplets in Liquid–liquid Systems

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Research on the ice slurry generator using the direct contact heat transfer of gas and water solution

The impact, freezing, and melting processes of a supercooled water droplet onto a cold slippery liquid-infused porous surface

Effect of drop size on the impact thermodynamics for supercooled large droplet in aircraft icing

Numerical investigation on heat and mass transfer characteristics of ice slurry in pulsating flow

Experimental study on the freezing process of water droplets for ice air jet technology

Study on concentration distribution and viscosity of ice slurry flow