Abstract:Slurry reactors have recently received more attention because of their advantages in caloric transfer. At present, the synthesis of dimethyl ether (DME) and methanol in slurry reactors is considered to be promising. The catalysts currently used in slurry reactors are all prepared by dispersing the traditional solid catalysts into an organic medium, which easily leads to the medium viscosity increase, defluidization decrease, and activity drop. This work suggests a novel method of preparing slurry catalysts for slurry reactors. Its main innovative thought lies in the direct preparation of catalysts from a solution to the slurry. Firstly, a catalyst precursor with a three-dimensional net structure is prepared. Then the precursor is modified by solvent substitution or heterogeneous azeotropic distillation and treated by N-2. After the treatment, a slurry catalyst is obtained. In this paper, two CuO/ZrO2 slurry catalysts were prepared by this new method and characterized by X-ray diffraction, N-2 adsorption, and temperature-programmed reduction. The catalysts were evaluated in CO hydrogenation in a slurry reactor. The results show that the slurry catalysts have a phase structure similar to that of the catalyst prepared by the traditional method. The CuO/ZrO2 slurry catalyst modified by heterogeneous azeotropic distillation is highly dispersed. Using this CuO/ZrO2 slurry catalyst can directly synthesize DME from CO hydrogenation without adding any methanol dehydration component, and the highest DME selectivity reaches 92.10%. The slurry catalyst is stable during the reaction for fifteen days, and no significant deactivation occurs.

Effect of Catalyst on Properties of UO2 Microspheres Manufactured by Gel-Casting

Co-hydrotreating of Used Engine Oil and the Low-Boiling Fraction of Bio-Oil Blends for the Production of Liquid Fuel

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

EFFECT OF ORGANIC PART OF ORGANIC/INORGANIC HYBRID SUPPORT IMMOBILIZED HYBRID CATALYST ON ETHYLENE POLYMERIZATION

Effects of Pore Structure on Methanol Selectivity in Carbon Monoxide Hydrogenation

Gel-casting Preparation of Ceramic ZrO2 Composition Microspheres

Preparing Uo2 Kernels by Gelcasting

Preparation of UCO Microspheres by Internal Gelation Process

Preparation and characterization of ultrafine particle CuO/ZrO2 catalysts I . Effect of hydrogel pH value on the morphology of the catalysts

Solvent-free preparation of well-dispersed and highly active CrOx/VOx/TiO2-SiO2 bimetallic catalyst for bimodal UHMWPE/ HDPE in-reactor blends

The Effect of Sintering Atmosphere and C/U on UCO Microspheres by Internal Gelation Process with Carbon Black

Fabrication Process Study of UCO Composite Ceramic Microspheres with Fructose As a Carbon Source by Internal Gelation and Carbothermic Reduction

Effect of a Calcium-Based Catalyst on the Pyrolysis Characteristics of Oil Sludge and Its Products

Preparation and characterization of ultrafine particle CuO/ZrO2 catalysts II. Effect of calcination temperature on the morphology of the catalyst

Liquid-phase preparation of CuO/ZrO2 catalyst used in slurry reactors and its catalytic activity for CO hydrogenation

Effect of cuprous oxide with different sizes on thermal and combustion behaviors of unsaturated polyester resin

Sintering of UO_2 Microsphere and Its Performance

Preparation of porous silica microspheres using silica nanoparticles with different morphologies and their properties as catalyst carriers

Sintering of UO2 Microsphere and Its Performance

Preparation of Hollow Cu and CuO x Microspheres with a Hierarchical Structure for Heterogeneous Catalysis