Abstract:CuO-ZnO catalysts for sorbitol hydrogenolysis were prepared by co-precipitation method, and the effects of CuO/ZnO molar ratio, precipitation temperature and pH value on the performance of CuO-ZnO catalyst prepared were investigated. The H2-TPR, SEM and XRD were used to examine the reduction property, surface morphology and the crystal phase of the catalysts. Using the CuO-ZnO catalyst prepared with molar ratio of CuO to ZnO equal to one, precipitation temperature of 70℃ and pH of 8.0, and under the hydrogenolysis conditions of temperature equal to 200℃, pressure of 11.80 MPa and reaction time of 5 h, the best catalytic activity with the conversion ratio of sorbitol equal to 86.42% and yield of C4～C6 polyols equal to 59.18% can be achieved. It was found that CuO is the active component of the CuO-ZnO catalyst for sorbitol hydrogenolysis and both the molar ratio of CuO to ZnO and the content of CuO in the catalysts affect the catalytic performance significantly. The function of ZnO in the catalyst is to disperse CuO and to adsorb and activate hydrogen, and then enhances the reducibility of CuO and improves the hydrogenolysis of sorbitol. In addition, during preparation, the precipitation temperature and pH might exert remarkable effects on the catalyst performance through determining the formation of phase morphology and crystallinity of the catalyst prepared.

Preparation and characterization of ultrafine particle CuO/ZrO2 catalysts I . Effect of hydrogel pH value on the morphology of the catalysts

Preparation and characterization of ultrafine particle CuO/ZrO2 catalysts II. Effect of calcination temperature on the morphology of the catalyst

Effects of CuO/ZnO Ratio and Preparation Conditions on Performance of CuO-ZnO Catalysts in Preparing C4～C6 Polyols through Sorbitol Hydrogenolysis

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Influence of mixing inside microreactor on microstructural evolution of Cu-ZnO catalyst

Preparation and properties of ultrafine SO4 2- /ZrO2 superacid catalysts

Preparation and Properties of Ultrafine SO42−/ZrO2 Superacid Catalysts

Surface active structure of ultra-fine Cu/ZrO2 catalysts used for the CO2+H2 to methanol reaction

A gel-oxalate co-precipitation process for preparation of Cu/ZnO/Al2O3 ultrafine catalyst for methanol synthesis from CO2+H2: (II) effect of various calcination conditions

Synthesis of CuO–ZnO–Al2O3 @ SAPO-34 Core@shell Structured Catalyst by Intermediate Layer Method

The effect of CuO crystallite size on the structure and performance of CuZnAl catalyst for mixed alcohols synthesis from syngas

A High Activity Cu/ZnO/Al2O3 Catalyst for Methanol Synthesis: Preparation and Catalytic Properties

PREPARATION AND GELATINATION MECHANISM OF CuO(CoO, MnO)/SiO2 NANOCOMPOSITE AEROGEL AS CATALYST CARRIER BY THE SOL-GEL PROCESS

Preparation and Microstructure of CuO-CoO-MnO/SiO2 Nanocomposite Aerogels and Xerogels As Catalyst Carriers

XPS Studies of Cu/ZnO/Al2O3 Ultra-Fine Catalysts Derived by a Novel Gel Oxalate Co-Precipitation for Methanol Synthesis by CO2+H2

Preparation and structural characterization of SiO2-ZrO 2 aerogels

STUDY ON PREPARATION,CHARACTERIZATION AND GELATION MECHANISM OF CuO(CoO,MnO)/SiO_2 NANOCOMPOSITE AEROGEL BY SOL-GEL PROCESS

ZnO-Al2O3-promoted CuO/ZrO2 catalyst prepared by oxalate gel-coprecipitation for the conversion of water-bearing materials

Ultrafine NiO–La2O3–Al2O3 aerogel: a promising catalyst for CH4/CO2 reforming

Preparation and Structural Characterization of SiO2-ZrO2 Aerogels

ChemInform Abstract: A Novel Process for Preparation of a Cu/ZnO/Al2O3 Ultrafine Catalyst for Methanol Synthesis from CO2 + H2: Comparison of Various Preparation Methods.