Abstract:Organic electroluminescence is one of the most promising technology for next generation of flat panel display. Hole transporting layer represents the weakest link in the electroluminescent structure considering the thermal stability of the materials. The most widely used hole transporting material, N,N'-bis (1-naphthyl)-N, N'-diphenyl-1, 1'-biphenyl-4, 4'-diamine (NPB), has a glass transition temperature ( Tg) of 95℃, which is much lower than that of the electron transporting material, tris (8- hydroxyquinoline) aluminum (Alq3) . Based on the good hole transporting property and suitable energy level matched with other materials of NPB, two new hole transporting materials: N, N'-bis(1-naphthyl)- N,N'-di(4-methylphenyl)-1,1'-biphenyl-4, 4'-diamine (NTB) and N, N'-bis(1-naphthyl)-N, N'-di(4- tert-butylphenyl)-1, 1'-biphenyl-4, 4'-diamine (NBB) were synthesized by introducing methyl and tert- butyl groups into NPB to improve its thermal stability. The glass transition temperature (Tg) of NTB and NBB measured by DSC are 108℃ and 129℃ respectively, showing better thermal stability than that of NPB. The ionization energy obtained by ultraviolet photoemission spectroscopy is 5. 2eV for all of NPB and its derivatives. The emission peak in the photoluminescent spectra of the solid films of NTB and NBB are at 455nm and 460nm, which are close to the emission peak of NPB at 440nm. The organic electroluminescent devices using NPB, NTB and NBB as hole transporting layer (HTM) were fabricated with the structure of ITO/CuPc(20nm)/HTM(50nm)/Alq3(60nm)/LiF(0.5nm)/Al(100nm). The emission spectra of the three devices are the same and the green color light was emitted from the Alq3 layer. The turn-on voltages of the devices are 11, 9, 8V for NPB, NTB and NBB, respectively. The brightness of the devices at 15V are 1 000, 1 300, 1 200cd/m2 for NPB, NTB and NBB. The devices with NTB and NBB also show better longevity than that of NPB in a prelimin ary test.

Study of the Effect of Film Thickness on the Performance of NPB/Alq3 Double Layer Organic Light-Emitting Diodes

Analysis on Mechanism of Current Transport in Organic Electroluminescent Thin Film Device

Study on the mechanism of organic thin film electroluminescence

Study of Organic Electrolumenescent Thin Film Cell

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Analysis of the Effect of Active Layer Thickness on Polymer Solar Cell Performance Based on Optical and Opto-Electronic Model

Optimal thickness of hole transport layer in doped OLEDs

Organic light-emitting diodes with varying thickness of bathocuproine layer

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Studies on the Performances of Blue Organic Electroluminescent Device with Different Electron Transport Layers

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Influence of Different Hole Transport Layer on the Performance of Organic Light-Emitting Devices

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

Bright Single-Active Layer Small-Molecular Organic Light-Emitting Diodes with a Polytetrafluoroethylene Barrier

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Organic light-emitting diodes made with poly (N-vinylcarbazole) (PVK) and 8-hydroxyquinoline aluminium (Alq3)

Synthesis of Thermal Stable Organic Hole Transporting Materials for Use in Electroluminescent Devices