Abstract:Sri Lanka is a major global producer of raw material-heavy minerals from beach placer deposits. This study focusses on upgrading Sri Lankan ilmenite sands to synthetic rutile via a mechanochemical method. Ball milling-induced sulphurisation and carbothermic reductions were examined using several geochemical techniques. Raw ilmenite concentrate contained over 95 wt% FeTiO3, ∼2 wt% SiO2, and ∼ 1 wt% Al2O3. Ilmenite was mixed with additives (i.e. sulphur, vein graphite, and a 1:1 mix of sulphur and vein graphite), separately in three ratios by weight, namely 1:1, 2:1 and 4:1, respectively. Each mixture was milled for 4 and 6 h. A high percentage of ilmenite/sulphur + graphite (ISG) was converted to nanoparticles (average particle size = 124 nm) in samples milled for 6 h. X-ray diffraction (XRD) spectra indicate that the intensities of sulphur and graphite peaks decrease after ball milling. This suggests possible dissolution of sulphur and graphite into the ilmenite structure, with the formation of mixed composite structures. The optimum ilmenite to additives ratio for ilmenite to rutile conversion was found to be 4:1. The occurrence of pyrite and pseudorutile peaks in XRD spectra of milled samples indicates that ilmenite reduction was initiated during ball milling. Fourier-transform infrared (FTIR) spectra of milled samples confirm the octahedral metal-ion stretching vibrations of carbon-incorporated ilmenite structures. The ilmenite-additive mixtures containing both sulphur and graphite (ISG) showed the best results. Consequently, ISG samples (mixing ratio of 4:0.5:0.5, and milled for 6 h) were isothermally annealed at 800 °C, 1000 °C and 1200 °C, respectively. Sharpening of rutile peaks and disappearance of pyrrhotite peaks in the annealed samples indicated the completion of the mechanochemical reactions that were initiated during ball milling. The optimum temperature for ilmenite reduction was determined to be 1000 °C. At that temperature pseudorutile peaks had disappeared from the XRD spectra of the annealed samples, whereas brookite and rutile peaks appeared. The method introduced in this study thus can be utilised to convert ilmenite to synthetic rutile.

Enhancement Effects of Mechanically Milling Facilities on Dissolution of Panzhihua Ilmenite

Wet Grinding of Montmorillonite and Its Effect on the Properties of Mesoporous Montmorillonite

Enhancing Zero-Valent Iron (ZVI) Pulverization During Mechanical Milling: FeSx As Milling Aids

Effect of ball-milling on the phase structure and hydrogen storage properties of Ti0.9Zr0.1Mn1.5 alloy

Effect of mechanochemical activation on surface oxidation of steel ball in milling serpentinite

Processing of ilmenite into synthetic rutile using ball milling induced sulphurisation and carbothermic reduction

Effects of Ball Milling and Ultrasonic Treatment on the UV Shielding Performance of Illite Micro Flakes

Research on the Mechano-chemical Effect of Natural Zeolite During Wet Ultrafine Grinding by Stirred Mill

On the grinding effects of high-silicon iron tailings

Effect of particle size on vacuum carbothermal reduction of Panzhihua ilmenite concentrate

Mechanical milling and its influence on microstructure and electric conductivity of high mass fraction TiC / Cu composites

Improvement of mechanochemical leaching of zinc oxide ore — Optimization of grinding parameters for basket grinder

Effects of wet grinding combined with chemical activation on the activity of iron tailings powder

Mechanism of strengthening consolidation and reduction of ilmenite pellets through high-pressure grinding rolls pretreatment

Effects of mechanical activation on structural and microwave absorbing characteristics of high titanium slag

Study on the leaching of mechanically activated chalcopyrite

Titanium and iron dissolutions from ilmenite by acid leaching and microbiological oxidation techniques

Titanium-Enriched Slag Prepared by Atmospheric Hydrochloric Acid Leaching of Mechanically Activated Vanadium Titanomagnetite Concentrates

Effect of Milling Material on Characteristics and Reactivity of Mechanically Treated Fly Ash to Produce PCDD/F

Experimental Investigation on the Combined Effects of Mechano-Chemical and Ultrasonic Vibration in Titanium Alloy Grinding

Dry Grinding Effect on Pyrophyllite-Quartz Natural Mixture and Its Influence on the Structural Alternation of Pyrophyllite.