Abstract:To address the resource utilization issue of MSWI fly ash, a method has been proposed to prepare cementitious materials using harmlessly processed MSWI fly ash (HPFA). After washing and thermal treatment, The physicochemical properties of HPFA were characterized using QXRD, ICP, XRF, and GC-MS. Cementitious materials were prepared using HPFA, gypsum and blast furnace slag (BFS) as raw materials, Through XRD, TG, FTIR, TEM, and SEM-EDS methods, the hydration and hardening characteristics were investigated, and the leaching of heavy metals from solidified materials in simulated surface water and landfill environments was evaluated using ICPMS. The results indicate that the harmless treatment can effectively reduce the chloride content and dioxins in MSWI FA but still contains heavy metals. The addition of HPFA (10%-50%) can enhance the compressive strength of cementitious materials, accelerate the exothermic process of cement hydration, and increase the total heat release of hydration, implying an improvement in the degree of hydration of the system.HPFA could effectively promote the hydration of gypsum and BFS, resulting in the higher formation of ettringite and C-(A)-SH(C/S=1,Al/Si=0.3).The formation of C(Mg/Fe)-(A)-S-H suggests that the Fe-Mg solid solution phase in HPFA may have participated in the hydration reaction. The increased stability of highly cross-linked (Q4) silicate tetrahedral structure with time implies that the material may have good durability. The leaching amount of heavy metals met the standards of Class I surface water in GB3838-2002 and GB5085.3-2007 which implies that the material has environmental safety. This study innovatively provides a preparation path for harmless MSWI fly ash and cementitious material ratios, reveals the hydration mechanism of HPFA in cementitious materials, evaluates the solidification ability of heavy metals, and provides important ideas for the resource utilization of MSWI fly ash.

Effect of Milling Material on Characteristics and Reactivity of Mechanically Treated Fly Ash to Produce PCDD/F

Mechanochemical Treatment of Fly Ash and De Novo Testing of Milled Fly Ash

De novo formation of dioxins from milled model fly ash

Mechanochemical Degradation of PCDD/Fs in Fly Ash Within Different Milling Systems.

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

PCDD/F Formation in Milled Fly Ash: Metal Chloride Catalysis

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Mechanical Treatment of MSWI fly Ash: A Way Forward to Inhibit PCB Reformation

Degradation of PCDD/Fs by Mechanochemical Treatment of Fly Ash from Medical Waste Incineration.

Accelerated Carbonation of Ball-Milling Modified MSWI Fly Ash: Migration and Stabilization of Heavy Metals

Effect Of Ball Milling Time On Pcdd/Fs Formation

Stabilization of Heavy Metals in Fly Ashes from Municipal Solid Waste Incineration Via Wet Milling

Degradation of Dioxins in Chelated Municipal Solid Waste Incineration Fly Ash by Low-Temperature Pyrolysis

Decomposition and reformation pathways of PCDD/Fs during thermal treatment of municipal solid waste incineration fly ash.

Dioxins Degradation and Reformation During Mechanochemical Treatment.

Suppressing Heavy Metal Leaching Through Ball Milling of Fly Ash

Effect of Feed Forms on the Results of Melting of Fly Ash by a DC Plasma Arc Furnace

Investigation of Mechanochemically Treated Municipal Solid Waste Incineration Fly Ash as Replacement for Cement

Mechanical Activation of Fly Ash from MSWI for Utilization in Cementitious Materials.

Preparation and Characterization of Cementitious Materials from Dedioxinized and Dechlorinated Municipal Solid Waste Incineration Fly Ash and Blast Furnace Slag