Abstract:The migration characteristics of heavy metals during the melting process were one of the key factors for safe treatment and resource utilization of incineration fly ash (IFA). In this paper, the material variation of heavy metal elements of Pb, Zn, Cu, and Fe during the IFA melting process was simulated by HSC 6.0 chemistry software. The effects of melting temperature, alkalinity, atmosphere, chlorine content of raw materials, and an iron bath added to the migration characteristics, and phase transformation of selected heavy metal elements was investigated. The simulation results were also verified by experimental results. The results showed that, with the increase in temperature, the gas phase proportion of Pb, Zn, Cu, and Fe gradually increased. The alkalinity had little effect on the proportion of elements Fe and Cu in the liquid slag (LS) phase and the element Pb in the gas phase, but the increase in alkalinity could inhibit the proportion of element Zn in the gas phase. Zn mainly existed in the gas phase, and the atmosphere had little influence on the distribution of Zn. In reducing atmosphere (RA), elements Fe and Cu, which entered the liquid metal (LM) phase, were promoted, while the volatilization of Pb was restrained, which was conducive to the recovery of heavy metals. The melting process of IFA with water-washing and dechlorination had an inhibitory effect on the volatilization of Zn and Pb, but had little effect on Fe and Cu. The proportion of element Zn in the gas phase reduced from 85.84% to 9.89%. With the iron bath added in the IFA melting process, 98.42% of Cu and 82.28% of Pb entered the LM phase as metal simple substances, and 76.3% of Zn entered the gas phase as Zn (g) and ZnCl2 (g). In the experimental verification, the distribution proportions of the four heavy metals in the gas phase, LS phase, and LM phase were consistent with the simulation results.

Effect of Feed Forms on the Results of Melting of Fly Ash by a DC Plasma Arc Furnace

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

Destruction of inorganic municipal solid waste incinerator fly ash in a DC arc plasma furnace

DC Arc Plasma Furnace Melting of Waste Incinerator Fly Ash

Process exploration for scale melting and solidifying of municipal solid waste incineration (MSWI) fly ash by horizontal cyclone melting furnace

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

High temperature melting of municipal solid waste incineration (MSWI) fly ash and co-disposal technology with blast furnaces

Vitrification of MSWI Fly Ash by Thermal Plasma Melting and Fate of Heavy Metals

An Experimental Study on the Melting Solidification of Municipal Solid Waste Incineration Fly Ash

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Mechanochemical Treatment of Fly Ash and De Novo Testing of Milled Fly Ash

Vitrification of MSWI fly ash using direct current double arc plasma

Thermal synergistic treatment of municipal solid waste incineration (MSWI) fly ash and fluxing agent in specific situation: Melting characteristics, leaching characteristics of heavy metals

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Fluidization-melting characteristics of fly ash from municipal solid waste incineration

Detoxifying PCDD/Fs and heavy metals in fly ash from medical waste incinerators with a DC double are plasma torch

Pilot Scale Study on Plasma Melting the Hazardous Waste Incineration Ash and Slag

Effect of Milling Material on Characteristics and Reactivity of Mechanically Treated Fly Ash to Produce PCDD/F

Thermodynamic and Experimental Study on Migration Characteristics of Heavy Metals during the Melting Process of Incineration Fly Ash

Mechanical Treatment of MSWI fly Ash: A Way Forward to Inhibit PCB Reformation