Abstract:A mineralogical mechanochemical reconditioning agent as a new member of the triboadditive family together with the traditional ones (friction modifiers, antiwear and extreme pressure additives) has been developed in light of the mechno-chemical reaction principle. Its reconditioning effects and mechanism on worn ferrous surfaces were investigated in detail in this paper. The agent package is formulated from a fine-powdery multi-component mixture of Serpentine minerals. The main reconditioning component is magnesium silicate hydroxide (Mg-6(Si4O10)(OH)(8)), with the surfactants for dispersing the main component into bulk lubricant and the catalysts for facilitating interfacial mechanochemical reactions. With commercial fully formulated engine oils as benchmark, the reconditioning effects of the agent package have been demonstrated both in laboratory tribotest and in the field trial for locomotive diesel engine. Surface examination of sampled worn surfaces on both laboratory test specimens and cylinder bore of locomotive diesel engine has shown that a nanocrystalline reconditioning layer ha S been generated which possesses nanometric roughness, higher surface hardness and proper H/E ratio. Advanced analyses have indicated that the inorganic species (ferrite and Fe-C matrix) construct the skeleton structure of the layer with some organic species (hydrocarbon and its ramification) and simpler inorganic species (Fe3O4 and FeOOH nanoparticles, as well as graphite and DLC) adhering on or dispersing in the bulk structure, offering the whole effectiveness of tribological defense of the reconditioning layer, i.e., friction reduction, wear abatement, extreme-pressure and reconditioning worn surface. Analysis of used oils in the field trial and crankcase simulation experiment in laboratory have suggested that generation mechanism of the reconditioning layer involves three interwoven processes: oxidative mechanical polishing, carbonization and graphitization of micro-lubricant on the contact regions, and mechanical alloying.

Effect of mechanochemical activation on surface oxidation of steel ball in milling serpentinite

CaO Assisted Mechanochemical Remediation of Lindane-Contaminated Soil

The Effect of Internal Oxidation from Serpentine on Generating Reconditioning Layer on Worn Ferrous Metal Surfaces

Effect of mechanochemical activation parameters on vanadium recovery from vanadium-bearing steel slag: Critical speed derivation for wet-ball milling

Phase Structure and Lubricity of In-Situ Generated Protective Layer on Worn Metal Surfaces in Presence of Mg6Si4O10(OH)8

Wet Grinding of Montmorillonite and Its Effect on the Properties of Mesoporous Montmorillonite

Effect of glycerol mechanical excitation on the phase evolution and hydration activity of steel slag

Effect of ball-milling on the phase structure and hydrogen storage properties of Ti0.9Zr0.1Mn1.5 alloy

The Effect of Surface Enriched Chromium and Grain Refinement by Ball Milling on Corrosion Resistance of 316l Stainless Steel

Elucidating the mechanism of ball milling on surface reconstruction of arsenopyrite: XPS property and theoretical studies

Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces

Ball milling treatment of Mn3O4 regulates electron transfer pathway for peroxymonosulfate activation

Improvement of mechanochemical leaching of zinc oxide ore — Optimization of grinding parameters for basket grinder

Defect Engineered Oxides for Enhanced Mechanochemical Destruction of Halogenated Organic Pollutants.

The high impact of a milling atmosphere on steel contamination

Wear behavior of martensite and ferrite in high chromium steel balls in wet grinding and implication to flotation

Surface modification of ultrahigh strength 300M steel under supercritical carbon dioxide (scCO2)-assisted grinding process

The oxidation of copper sulfide minerals during grinding and their interactions with clay particles

A New Method (Ball Milling and Sodium Sulfide) for Mechanochemical Treatment of Soda Ash Chromite Ore Processing Residue

Beneficial utilization of ball-milled carbon sand to activate peroxymonosulfate oxidation: Quantitation of ROS using probe-based kinetic models and mechanism insights

Deformation-induced Reactions of ZnO and TiO2