Abstract:The main chemical component of high-silicon iron tailings (HSITs) is SiO2; HSITs also include some oxides such as Al2O3 and CaO. Mechanical activation can reduce the particle size of HSITs and enhance their pozzolanic activity such that they can be used as a type of mineral admixture for cement-based materials (CBMs). This study aims to investigate the mechanical activation (ultrafine grinding) effects of HSITs, including physical and crystallization structure effects. The particle distribution, specific surface area, density, and solubility of HSITs were tested using laser particle size analysis and other routine physical testing methods. Their crystal structures were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry-thermogravimetry (DSC-TG). Grinding reduced the particle size of HSIT particles and increased their specific surface area, wherein the minimum D50 was 5.75 μm, the maximum specific surface area was 7608 m2/kg, and the corresponding grinding time was 3.5 h. With an increase in grinding time, the solubility showed an increasing trend; however, the density showed a decreasing trend. The change was fast before 3.5 h or 4 h and then slowed down, but the final solubility was still higher than its initial level, while the final density was still lower than its initial level. Grinding reduced the degree of crystallization of the minerals in HSITs and increased the microscopic strain and disorder of its crystal structure. These changes were significant for a grinding time of 0–3.5 h, after which the changes tended to be slow. The symmetry and integrity of the SiO2 structure decreased with grinding. The activity index of the HSIT powder was higher than 0.6. Ultrafine grinding improves the particle size distribution of HSITs and reduces the crystallinity of their main minerals, which in turn increases their chemical reactivity. It can be said that ultra-finely ground HSIT powder is pozzolanic and can be used as a mineral admixture for CBMs, and its grinding limit can be inferred to be 3.5 h.

Mechanism of strengthening consolidation and reduction of ilmenite pellets through high-pressure grinding rolls pretreatment

Effect of high-pressure grinding rolls pretreatment on the preparation of vanadium titanium magnetite pellets

Mechano-chemical Activation of Magnetite Concentrate for Improving Its Pelletability by High Pressure Roll Grinding

Investigation of the Hydrogen-Rich Reduction of Panzhihua Ilmenite Concentrate Pellets

Fundamental Study on Utilization of Titanium Resources by RHF Process

Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment

EXPERIMENTAL STUDY ON THE REDUCTION OF IRON ORE AND COAL MIXED PELLETS OF HIGH PHOSPHORUS HEMATITE PRE-TREATED BY MICROWAVE IRRADIATION

Effects of H 2 , CO, and a gas mixture on the reduction process of raw and pre-oxidized ilmenite concentrate powders

Enhanced reduction of ilmenite ore by pre-oxidation in the view of pore formation

Strengthening iron enrichment and dephosphorization of high-phosphorus oolitic hematite using high-temperature pretreatment

Experiment study on the high-phosphorus hematite carbothermal reduction in microwave field

Mechanism study on the high-phosphorus hematite carbothermal reduction in microwave field

Interface behavior and oxidation consolidation mechanism of titanium-bearing iron sand particles with ball-milling pretreatment

Recrystallization and diffusion mechanisms of segregation improvement in cast billets by high temperature reduction pretreatment

Research on influence of grinding blast furnace return ore on reduction swelling index of low silicon fluxed pellets and production practice

Lump Iron Ore Pre-heating Treatment to Improve Softening-Melting Performance and Reduce Energy Consumption in Ironmaking Process

Reduction and Melting Behavior of Pre-reduction Metallized Carbon-Bearing Pellets in Iron Bath Smelting Reduction Furnace

On the grinding effects of high-silicon iron tailings

A Study on the Influence of Drying and Preheating Parameters on the Roasting Properties of Limonite Pellets

Isothermal reduction and nitridation kinetics of ilmenite concentrate in ammonia gas

A process for producing synthetic rutile from Panzhihua titanium slag