Abstract:Objectives: Evaluation of the effect of grinding on flexural strength of zirconia after low temperature degradation (LTD) and pH-cycling. Materials and Methods: Sixty-four bar-shaped specimens of yttria-stabilized tetragonal polycrystalline zirconia were milled, sintered, wet-polished, and divided into 8 groups (N=8). The four control groups were not aged while artificial aging was performed in the 4 experimental groups in three steps including LTD in steam for 40h, pH-cycling, and tooth brushing for artificial aging. All groups underwent surface preparations as follows: standard polishing without surface treatment (Sp), grinding with a blue-yellow band diamond instrument (Gr); grinding with a diamond rotary instrument (DRI) and then over-glazing (Gl); grinding with a DRI followed by two-step intraoral polishing (Po); standard polishing and aging (Sp-Ag); grinding and aging (Gr-Ag), grinding, over-glazing and aging (Gl-Ag); and grinding, polishing and aging (Po-Ag). Monoclinic content was assessed in one specimen of each group by X-ray diffraction (XRD). The 3-point flexural strength test was performed in a universal testing machine. The results were analyzed with two-way ANOVA and Tukey's test (α=0.05). Results: Mean flexural strength (Mpa) was significantly higher in groups Gr and Po compared to group Sp (both, P<0.0001) and group Gl (both, P<0.0001). In XRD analyses, the highest monoclinic phase before aging was observed in group Gr (12.6%), and after aging in group Gr-Ag (51.2%). Conclusion: Grinding and polishing increased the flexural strength, while glazing did not exhibit any significant effect on this parameter. Furthermore, aging did not adversely affect flexural strength.

Dry Grinding Effect on Pyrophyllite-Quartz Natural Mixture and Its Influence on the Structural Alternation of Pyrophyllite.

Nano-Structural Alteration of Pyrophyllite by Grinding Revealed by X-Ray Diffraction and High-Resolution Transmission Electron Microscopy

Wet Grinding of Montmorillonite and Its Effect on the Properties of Mesoporous Montmorillonite

Evaluation of particle size reduction and agglomeration in dry grinding of natural quartz in a planetary ball mill

Effects of dry grinding on the structure and granularity of calcite and its polymorphic transformation into aragonite

Analysis on Ground Surface Damage of Quartz Fiber-Reinforced Quartz Composites

Ball Mill Grinding Characteristics with Respect to the Chemical Composition of Pyrophyllite

Spectra on the Influence of Grinding to Kaolinite Structure

Effects of Ball Milling and Ultrasonic Treatment on the UV Shielding Performance of Illite Micro Flakes

Effects of Meso-Structure in Grinding of 2.5D Woven Fiber-Reinforced Ceramic Composites

Research on the Mechano-chemical Effect of Natural Zeolite During Wet Ultrafine Grinding by Stirred Mill

Fractal characteristics of particle groups and mechanochemical effects of Yellow River sediment after mechanical grinding

Effect of Hydrothermal, Chemical, and Mechanical Degradation on Flexural Strength and Phase Transformation of Ground, Glazed, and Polished Zirconia

Effect of grinding parameters on surface integrity and flexural strength of 3Y-TZP ceramic

Innovative correlation relating the destruction of graphite flakes to the morphology characteristics of minerals

Effects of rotation speed and media density on particle size distribution and structure of ground calcium carbonate in a planetary ball mill

Insight into the microstructure and physicochemical properties of palygorskite with dry state and moisture condition by mechanical pulverizing

Phase Transformations and Chemical Compositions in Different Processing Products of Pyritum Preparata

Ultrafine dry grinding of talc by planetary mill: effects of operating conditions

EFFECT OF GRINDING ON Y-123 and Bi(Pb)-2223 PHASE SUPERCONDUCTORS