Abstract:Surface modification by organophilization and silanization of polygorskite. Linear low‐density polyethylene (LLDPE) is a polyolefin known for its superior low‐temperature heat seal ability, low‐temperature tolerance, and bag‐tear resistance which are important features for the polymeric packaging sector. In this work, to improve the mechanical properties and expand the range of applications of LLDPE, the microfibrillar clay mineral palygorskite (PAL) was added. However, the use of PAL as a reinforcing agent for polymers depends on its purification process to extract accessory minerals such as calcite, dolomite, and quartz. In addition to this purification process, two surface modifications were used on the purified PAL (PALp) to improve interactions with LLDPE: silanization with aminosilane (PALs) and organophilization by incorporating an organic compound (PALo). The PAL were characterized according to their morphological properties using transmission electron microscopy (TEM), X‐ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT‐IR). The films of LLDPE/PAL, with varying levels (1, 3, and 5 wt%) and types of PAL (raw PAL, PALp, PALs, and PALo), were prepared by an extrusion process, and films were prepared by compression molding, without preferred orientation. The films were characterized by rheological analyses, tensile tests, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and water vapor permeability. Incorporating modified PAL was significant in enhancing the mechanical properties of the nanocomposites. LLDPE/PALs with the addition of 3 wt% PALs showed a 14% increase in elastic modulus (281.08 ± 8.25 MPa) compared to the nanocomposite with 3 wt% of raw PAL (243.43 ± 15.01 MPa). Highlights The PAL is a clay mineral with a fibrous morphology and has a low cost. The technique to purify PAL is a quick, simple, and inexpensive technique. Comparison between of two technique surface modification of PAL. The effectiveness of modifications of PAL was confirmed in LLDPE films. The surface modification with silanization was more effective.

Insight into the microstructure and physicochemical properties of palygorskite with dry state and moisture condition by mechanical pulverizing

Preparation and Properties of Organic Palygorskite SBR/organic Palygorskite Compound and Asphalt Modified with the Compound

Wet Grinding of Montmorillonite and Its Effect on the Properties of Mesoporous Montmorillonite

Mechanical and Thermal Properties of Palygorskite Poly(butylene Succinate) Nanocomposite

Purification and dissociation of raw palygorskite through wet ball milling as a carrier to enhance the microwave absorption performance of Fe3O4

A Comparative Study about Superamphiphobicity and Stability of Superamphiphobic Coatings Based on Palygorskite

Dry Grinding Effect on Pyrophyllite-Quartz Natural Mixture and Its Influence on the Structural Alternation of Pyrophyllite.

Nano-Structural Alteration of Pyrophyllite by Grinding Revealed by X-Ray Diffraction and High-Resolution Transmission Electron Microscopy

INTERACTION BETWEEN SMECTITE AND PALYGORSKITE IN THE COLLOID SYSTEM OF AQUEOUS SUSPENSION

Quantification of pore modification in coals due to pulverization using synchrotron small angle X-ray scattering

Ultrasonic disaggregation of dioctahedral palygorskite crystal bundles for enhancing the stability and antibacterial properties of Pickering emulsion

Purification of natural palygorskite clay: Process optimization, cleaner production, mineral characterization, and decolorization performance

Tailoring LLDPE properties with modified palygorskite fillers: A comprehensive study

Modification of liquid phase and microstructure of sintered mullite by different additives

Effect of Self-Desiccation on the Pore Structure of Paste and Mortar Incorporating 70% Ggbs

Experimental Investigation of Pore Structure Damage in Pulverized Coal: Implications for Methane Adsorption and Diffusion Characteristics

Effect of Additives on Calcium Sulfate Hemihydrate Whiskers Morphology from Calcium Sulfate Dehydrate and Phosphogypsum

Effects of Spatial Correlation Property of Microstructure on the Pulverising Performance of Rock Prisms

Ammonium sulfide-assisted hydrothermal activation of palygorskite for enhanced adsorption of methyl violet

Effects of crystal chemistry on adsorption, occurrence, and mobility of water in palygorskite tunnels