Abstract:Surface modification by organophilization and silanization of polygorskite. Linear low‐density polyethylene (LLDPE) is a polyolefin known for its superior low‐temperature heat seal ability, low‐temperature tolerance, and bag‐tear resistance which are important features for the polymeric packaging sector. In this work, to improve the mechanical properties and expand the range of applications of LLDPE, the microfibrillar clay mineral palygorskite (PAL) was added. However, the use of PAL as a reinforcing agent for polymers depends on its purification process to extract accessory minerals such as calcite, dolomite, and quartz. In addition to this purification process, two surface modifications were used on the purified PAL (PALp) to improve interactions with LLDPE: silanization with aminosilane (PALs) and organophilization by incorporating an organic compound (PALo). The PAL were characterized according to their morphological properties using transmission electron microscopy (TEM), X‐ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT‐IR). The films of LLDPE/PAL, with varying levels (1, 3, and 5 wt%) and types of PAL (raw PAL, PALp, PALs, and PALo), were prepared by an extrusion process, and films were prepared by compression molding, without preferred orientation. The films were characterized by rheological analyses, tensile tests, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and water vapor permeability. Incorporating modified PAL was significant in enhancing the mechanical properties of the nanocomposites. LLDPE/PALs with the addition of 3 wt% PALs showed a 14% increase in elastic modulus (281.08 ± 8.25 MPa) compared to the nanocomposite with 3 wt% of raw PAL (243.43 ± 15.01 MPa). Highlights The PAL is a clay mineral with a fibrous morphology and has a low cost. The technique to purify PAL is a quick, simple, and inexpensive technique. Comparison between of two technique surface modification of PAL. The effectiveness of modifications of PAL was confirmed in LLDPE films. The surface modification with silanization was more effective.

Tailoring LLDPE properties with modified palygorskite fillers: A comprehensive study

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Potential of oxalic acid leached natural palygorskite-rich clay as multidimensional nanofiller to improve polypropylene

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Tailoring Poly(lactic acid) (PLA) Properties: Effect of the Impact Modifiers EE-g-GMA and POE-g-GMA

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Chemical surface modification of pineapple leaf fiber for polymer composites applications: Comparative study

Surface modification of phosphogypsum and application in polyolefin composites

Flat biofilms extrusion of poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) grafted with glycidyl methacrylate blends: Toward ecological packaging for sustainability

Design of novel Polylactide composite films with improved gas barrier and mechanical properties using epoxy chain extender‐grafted organic montmorillonite

Tuning wettability and mechanical property of polylactide composite films with in-situ nanofibrils of poly(butylene adipate-co-terephthalate)

Role of lubricant with a plasticizer to change the glass transition temperature as a result improving the mechanical properties of poly(lactic acid) PLLA

The characterization and properties of low linear density polyethyelene (LLDPE)/ acrylonitrile butadiene rubber (NBR)/ palm press fiber (PPF) with γ-aminopropyltriethoxysilane coupling agent

Surface Modification Of Linear Low-Density Polyethylene Film By Amphiphilic Graft Copolymers Based On Poly(Higher Alpha-Olefin)-Graft-Poly(Ethylene Glycol)

Study of Thermal, Mechanical and Barrier Properties of Biodegradable PLA/PBAT Films with Highly Oriented MMT

Improving the rheology of linear low-density polyethylene (LLDPE) and processability of blown film extrusion using a new binary processing aid

Enhanced Toughness of PLLA/PCL Blends Using Poly(d-Lactide)-poly(ε-caprolactone)-poly(d-lactide) As Compatibilizer

Study on LLDPE/mPE Thin Film Blown Modified by the Super-fine Ground CaCO_3

Enhancing the Oxygen-Barrier Properties of Polylactide by Tailoring the Arrangement of Crystalline Lamellae