Abstract:In order to effectively remedy shallow grooves on asphalt pavements, this study presents an innovative solution, termed Polyamide-based Asphalt Pavement Shallow Groove Rapid Repair Material (PA-SGRRM). This material employs polyamide 6 (PA6) as the matrix resin, in conjunction with polypropylene (PP), ethylene-vinyl acetate copolymer (EVA), and maleic anhydride-grafted polyethylene-octene copolymer (POE-g-MAH). It is manufactured through an extrusion granulation process. At the outset, a molecular dynamics approach was employed to assess the compatibility of the primary constituents and the adhesion between the matrix resin and asphalt, confirming the rationale behind the material selection. Subsequently, the orthogonal experimental design method was utilized to investigate the influence of design parameters (POE-g-MAH content, PP content, and EVA content) on the flexural strength, tensile strength, low-temperature toughness, and melt flow rate of PA-SGRRM. Following this, we prepared samples with the optimal proportions of EVA and POE-g-MAH and conducted a separate analysis to evaluate the impact of PP on the saturated moisture content of PA-SGRRM. Finally, we employed Scanning electron microscopy (SEM) to observe the microstructures of the low-temperature fracture surface and ambient temperature tensile fracture surface of the PA-SGRRM and employed Fourier transform infrared spectroscopy (FTIR) to deduce the primary chemical reactions occurring within the PA-SGRRM. The results demonstrated that POE-g-MAH played a crucial role in enhancing the compatibility of the simulated hybrid system consisting of PP and PA6. Additionally, it was observed that adhesion between PA6 and asphalt existed, with a gradual decrease as temperature rose. The content of POE-g-MAH and PP were the two primary parameters influencing the performance of PA-SGRRM. POE-g-MAH exerted a significant adverse impact on the flexural strength, tensile strength, and melt flow rate of PA-SGRRM, while substantially improving its lowtemperature toughness. The PP positively reduced the water absorption characteristics of PA-SGRRM. Based on the experimental results, the optimal combination of design parameters for PA-SGRRM is recommended.

Preparation and Properties of Organic Palygorskite SBR/organic Palygorskite Compound and Asphalt Modified with the Compound

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Improved Properties of Weathered Coal and SBR/Weathered Coal Compound Modified Asphalt

Thermal Behaviour And Improved Properties Of Sbr And Sbr/Natural Bitumen Modified Bitumens

Rheological and adhesion properties of nano-organic palygorskite and linear SBS on the composite modified asphalt

Synergy Effect of Nano-Organic Palygorskite on the Properties of Star-Shaped SBS-Modified Asphalt

Investigation on mechanism and rheological properties of Bio-asphalt/PPA/SBS modified asphalt

Preparation of chemical-physical hybrid crosslinking double network gel composite incorporated SBS modified asphalt

Research on Performance of SBS-PPA and SBR-PPA Compound Modified Asphalts

A Study on Effect of Organic Compound Addition Agent on Properties of Asphalt

Probing the Effect of Linear and Crosslinked POE-g-GMA on the Properties of Asphalt

Properties of polymer modified asphalt by polyphosphoric acid through molecular dynamics simulation and experimental analysis

Evaluation of the Thermal Stability and Micro-Modification Mechanism of SBR/PP-Modified Asphalt

Preparation and properties of styrene–butadiene–styrene copolymer/kaolinite clay compound and asphalt modified with the compound

Study on the Performance and Modification Mechanism of Polyphosphoric Acid (PPA)/Styrene–Butadiene–Styrene (SBS) Composite Modified Asphalt

Evaluating the Effects of Polyphosphoric Acid (PPA) on the Anti-Ultraviolet Aging Properties of SBR-Modified Asphalt

A Novel High-Performance Warm-Mix Porous Asphalt Prepared with Polyurethane Prepolymer: Strength Development Mechanism and Mechanical and Functional Performance

Development of shape memory polyurethane/SBS compositely modified asphalt and synergistic modification mechanism

Modifying Effect and Mechanism of Polymer Powder on the Properties of Asphalt Binder for Engineering Application

Preparation and Performance Analysis of Polyamide-Based Rapid Repair Material for Asphalt Pavement Shallow Groove

Improving Effect and Mechanism on Service Performance of Asphalt Binder Modified by PW Polymer