AMYLOIDOSIS: ITS DIFFERENTIATION INTO PERIRETICULIN AND PERI-COLLAGEN TYPES.

H. Heller,H. Missmahl,E. Sohar,J. Gafni

DOI: https://doi.org/10.1002/PATH.1700880103

1964-07-01

The Journal of Pathology and Bacteriology

Abstract:

What problem does this paper attempt to address?

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Kenan Li,Xili Yan,Yujie Wang,Tao Ai,Yanhui Niu,Yu Chen

DOI: https://doi.org/10.1016/j.conbuildmat.2024.136585

IF: 7.4

2024-01-01

Construction and Building Materials

Abstract:For the preventive maintenance engineering of special pavements such as ultra-thin friction courses and bridge deck pavements, the performance requirements of the utilized high-viscosity asphalt, including the resistance to permanent deformation, cracking ability, durability, and recyclability, are becoming increasingly stringent. In this study, based on the click reaction principle of carbon-carbon double (CC) bond, hydroxyl-terminated polybutadiene (HTPB) and isophorone diisocyanate (IPDI) were selected as the raw materials to synthesize thermoplastic polyurethane (TPU), and then 4,4’-disulfanediyldiphenol (DSDDP) was introduced as the chain extender to design a high-viscosity thermoplastic polyurethane modified asphalt (PUA). Subsequently, the mechanical and rheological properties of PUA under different types of chain extenders and polyurethane (PU) contents were tested, and the microstructure and modification mechanism were investigated at multiple scales. The results indicated that after the introduction of DSDDP, the basic physical properties and viscosity of PUA were greatly enhanced, the fluidity was significantly reduced, and excellent deformation and cracking resistance were achieved at various temperatures. The microscopic tests revealed that the viscosity enhancement effect mainly originated from the click reaction between the disulfide (S-S) bonds in DSDDP and the CC bonds on the soft segments of PU, which can further crosslink the linear PU molecular chain and form a dense spatial network structure to restrict the flow of macromolecules. The dynamic exchange of some S-S bonds facilitates the repetitive opening of the PUA network structure at high temperatures, so the PUA still exhibits thermoplasticity at high temperatures, which verifies the feasibility of the proposed design. Moreover, the addition of DSDDP reduced the degree of microphase separation of PUA, so the designed PUA can effectively adapt to various temperature environments. Overall, the findings of this study can boost the application of this novel PUA in the thin surface layers of high-performance pavements.
Mechanical and Rheological Properties of Polyurethane-Polyurea (Pu-Pua) Modified Asphalt Binder

Hao Wu,Mei Yang,Weimin Song,Zhezheng Wu,Dongwei Chen,Xiaobao Chen

DOI: https://doi.org/10.1016/j.conbuildmat.2023.134798

IF: 7.4

2024-01-01

Construction and Building Materials

Abstract:Polyurethane (PU) is one of the common polymer modifiers used for asphalt, and the PU modified asphalt currently plays a fundamental role in road constructions. However, most of the PU as the modification could bring about an increasement in viscosity and rigidity to asphalt binders, thus leading to insufficient ductility and deformation compatibility for the materials to some extent. In the present study, a composite polymer material synthesized with polyurethane and polyurea (PU-PUa) was introduced as a modifier to the asphalt binder in an attempt to integrate their individual advantages into the asphaltic material. The curing time, tensile strength, and Fourier Transform infrared spectroscopy (FTIR) tests were conducted to determine the optimal proportion of the PU and PUa in the compound polymer, and its formation mechanism was also discussed. The fundamental properties of the asphalt binders modified with various contents of PU-PUa (5%, 10%, and 15% by weight), such as the storage stability, rheological properties, creep recovery capacity, and fatigue resistance, were investigated through the thermal storage, dynamic rheological, stress creep recovery (MSCR), and linear amplitude sweep (LAS) tests. Furthermore, in order to understand the adhesion property of the PU-PUa modified asphalt on aggregates, the pull-off tests considering both dry and water immersion conditions were performed. The test results showed that the PU-PUa could be effectively used to modify asphalt binders, and 7:3 was found to be the best proportion of the PU and PUa. The addition of PU-PUa could promote the high temperature performance, enhance the recovery ability for creep, and extend the fatigue life of the asphalt binders (for both 70# and SBS asphalt). The optimal content of PU-PUa for the modification was found to be 10% based on the storage stability and mechanical performance of the modified asphalt binders.
Laboratory Study and Molecular Dynamics Simulation of High- and Low-Temperature Properties of Polyurethane-Modified Asphalt

Zengping Zhang,Ting Huang,Jia Sun,Zhaofei Wang,Li Wang,Xue Li,Hao Liu,Dali Zhang

DOI: https://doi.org/10.1061/jmcee7.mteng-15115

IF: 3.2

2023-08-01

Journal of Materials in Civil Engineering

Abstract:This study investigated the modification mechanism of polyurethane (PU) on the high- and low-temperature properties of asphalt based on experimental and molecular dynamics (MD) simulations. PU-modified asphalt was prepared using an in situ polymerization method. The high- and low-temperature properties of asphalt containing various PU contents were investigated via a series of laboratory tests. The asphalt molecular model, the PU molecular model, and the PU–asphalt mixes system were modeled using software. Based on reasonable models, the influence of PU content on the physical modulus and molecular motion of asphalt at high temperatures was researched using MD simulations. The glass transition temperature of PU-modified asphalt with different contents was obtained using software, and the free volume theory and molecular diffusion movement were used to interpret the improvement mechanism of PU content on the low-temperature performance of asphalt. The results indicate that PU effectively can improve the high- and low-temperature properties of asphalt. PU has a significant positive effect on the physical modulus of asphalt, and the effect becomes more significant with the increase of PU content. In addition, PU can form a tight structure with asphalt and increase the stability of the asphalt system. The free volume ensures the free movement of PU molecules in the asphalt, allowing PU to be dispersed homogeneously in the asphalt. However, the free volume decreases when the PU content exceeds 15% by weight, which limits the improvement of the low-temperature performance of asphalt. The results of molecular simulation can explain the enhancement mechanism of PU, providing a reference for the performance enhancement of PU-modified asphalt.

construction & building technology,materials science, multidisciplinary,engineering, civil
Effects of Polyurethane Thermoplastic Elastomer on Properties of Asphalt Binder and Asphalt Mixture

Zengping Zhang,Jia Sun,Meng Jia,Xiaoyi Ban,Li Wang,Liqi Chen,Ting Huang,Hao Liu

DOI: https://doi.org/10.1061/(asce)mt.1943-5533.0003591

IF: 3.2

2020-12-17

Journal of Materials in Civil Engineering

Abstract:Polyurethane (PU) is a synthetic material available for researchers to be designed in terms of their demands. This study prepared a novel polyurethane thermoplastic elastomer (PUTE) as an asphalt modifier through the reasonable selection of raw materials and formula. The results of the Fourier transform infrared spectroscopy (FTIR) test confirm the chemical reaction between ─ NCO groups in PUTE prepolymer and ─ OH groups in the most polar asphalt molecules (asphaltenic regions). Effects of the PUTE modifications (1%, 3%, 5%, 7%, 9%, 11%, 13%, and 15% by asphalt binder weight) on the asphalt binder properties were then studied through a series of tests. PUTE is demonstrated to play a positive role in high- and low-temperature properties and the mechanical properties of the asphalt binder. All of the PUTE modified binders have desirable storage stability. Moreover, using 11% PUTE is recommended. Finally, the technical properties of PUTE and SBS modified asphalt mixture were compared. The results indicate that the PUTE modified asphalt mixture performs better in low-temperature property and moisture stability than the SBS modified asphalt mixture, whereas the PUTE modified asphalt mixture has worse high-temperature property than the SBS modified asphalt mixture.

construction & building technology,materials science, multidisciplinary,engineering, civil
Influence on Polyurethane Synthesis Parameters Upon the Performance of Base Asphalt

Xin Jin,Siwei Sun,Naisheng Guo,Shuolei Huang,Zhanping You,Yiqiu Tan

DOI: https://doi.org/10.3389/fmats.2021.656261

2021-07-09

Frontiers in Materials

Abstract:The objective of this study aims to investigate the performance of thermoplastic polyurethane elastomers (TPU)-modified asphalt, with special focus on the influence of polyurethane synthesis parameters upon the performance of base asphalt. In this study, the TPU modifier was incorporated into base asphalt to prepare TPU-modified asphalt by using a self-determined laboratory process. The properties of polyester-based TPU and polyether-based TPU modified asphalt with different contents was analyzed by the base performance tests. The Fourier transform infrared spectroscopy (FTIR), fluorescent microscope, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravity (TG), dynamic shear rheology (DSR), and bending beam rheology (BBR) tests were conducted to expose chemical, microstructure, and rheological properties of the asphalt binders, respectively. The results indicated that the modified asphalt with 5% TPU modifier exhibited a favorable performance in terms of the penetration, ductility, softening point, and rotational viscosity, respectively. The isocyanate and polyol reacted to form carbamate in the TPU-modified asphalt, and moreover the isocyanate and aromatic compounds reacted to form halohydrins in the asphalt. Large particles contained in the polyester-based TPU-modified asphalt increased obviously with the increase of C h (Hard segment content) and r (Isocyanate root index, molar ratio between NCO and OH) value, the fracture mode of it subjected to external load indicated a typical brittle fracture. The content of MDI in the synthesized polyurethane modifier was an important factor affecting the high-temperature stability of the modified asphalt. The polyester-based TPU modifier had a better high temperature performance than the polyether-based TPU modifier. The polyether polyol chain segment showed a greater flexibility as compared to polyester polyol; the addition of polyether polyols can be effectively offset of MDI chain rigidity as r ≤ 1 and C h < 40% leading to the improvement of the viscoelastic property of asphalt. When C h = 40% and r = 0.95, the polyether-based TPU-modified asphalt exhibited the same high-temperature grade as the polyester-based TPU-modified asphalt, whereas the polyether-based TPU-modified asphalt showed obviously higher low temperature grades. The polyester-based TPU with C h = 40% and r = 1 can be used as a modifier to increase the durability of asphalt binders.

materials science, multidisciplinary
Nosocomial candidemia in a university hospital in Taiwan.

Hung Cc,Yee-Chun Chen,S. Chang,K. Luh,W. Hsieh

Journal of the Formosan Medical Association = Taiwan yi zhi

Abstract:The incidence of nosocomial candidemia increased 27-fold over the past 13 years at National Taiwan University Hospital. In order to investigate its predisposing factors, clinical manifestations and prognostic determinants, a prospective observational study of nosocomial candidemia was undertaken at the hospital. From 1 May 1994 to 30 April 1995, 118 consecutive adult patients with 120 Candida spp blood isolates were analyzed. Clinical presentations included fever (100%) with a median duration of 3 days, diarrhea within 7 days of candidemia (27.9%) and macronodular skin emboli (7.6%). Laboratory studies showed worsening azotemia (35.6%), elevation of aminotransferase (28.3%), leukocytosis (27.1%) and thrombocytopenia (23.3%). Use of multiple antibiotics, retained vascular catheters and parenteral nutritional support were the three most common predisposing factors for candidemia. C. albicans was the most common isolate (50%), followed by C. tropicalis (20%), C. glabrata (14%), C. parapsilosis (9.2%). C. guilliermondii (2.5%), and C. Krusei (1.7%). C. tropicalis was more frequently the cause of candidemia in patients with leukemia and neutropenia, while C. glabrata was more commonly seen in patients receiving fluconazole prophylaxis. A severity scoring system adopted from prospective bacteremia studies proved to be highly predictive of mortality in candidemic patients. The overall case fatality rate was 70/118 (59.3%), and 51/70 (72.9%) were attributable to candidemia. In a multivariate analysis, the prognostic factors adversely influencing outcome were: higher severity scores, no removal of the catheter, persistent candidemia and lack of antifungal therapy.
Research on modification mechanism and performance of an innovative bio-based polyurethane modified asphalt: A sustainable way to reducing dependence on petroleum asphalt

Yuanyuan Meng,Lei Zhan,Chichun Hu,Yuke Tang,Daniel Großegger,Xiangqian Ye

DOI: https://doi.org/10.1016/j.conbuildmat.2022.128830

IF: 7.4

2022-10-03

Construction and Building Materials

Abstract:Sustainable bio-oil, as a modifier and partial substitute for asphalt binder, is potentially reducing dependence on non-renewable petroleum asphalt in pavement engineering. However, unsatisfactory performance of bio-oil asphalt dramatically hinders the application of bio-oil in pavement engineering. In this paper, bio-oil based polyurethane modified asphalt (BPMA), an innovative way of modifying bio-oil asphalt binder, was explored to prepare a sustainable asphalt binder with satisfactory performance. BPMA was synthesized by virgin asphalt and bio-based polyurethane (BPU), in particular, BPU was pre-assembled by castor oil, isosorbide, and isocyanate. The formulation and synthesis process of BPU were investigated via mechanical property test and fourier transform infrared spectroscopy (FTIR). Attributed to the addition of isosorbide, BPU exhibited a significant decrease in crosslinking density and a remarkable improvement in ductility. Furthermore, BPMA containing various contents of BPU at different curing duration were systematically studied by rotational viscosity, storage stability, fluorescence microscopy, FTIR, dynamic shear rheometer and bending beam rheometer to evaluate workability, compatibility, modification mechanism, working performances. Results showed that BPMA exhibited suitable workability, good compatibility, and satisfactory working performance. Moreover, the microstructure of BPMA transformed from VB-phase dominated island structure to BPU-phase dominated spatial network structure as BPU content increased. FTIR results indicated a combination modification mechanism of physical modification (effect of BPU) and chemical modification (chemical crosslinking between BPU and VB).

construction & building technology,materials science, multidisciplinary,engineering, civil
Properties of polymer modified asphalt by polyphosphoric acid through molecular dynamics simulation and experimental analysis

Zhen Fu,Yujie Tang,Chong Peng,Feng Ma,Chen Li

DOI: https://doi.org/10.1016/j.molliq.2023.121999

IF: 6

2023-05-10

Journal of Molecular Liquids

Abstract:Polyphosphoric acid (PPA) plays an important role in improving the performance of polymer modified asphalt binders. This study aims to understand the modification mechanism of PPA in styrene-butadiene rubber (SBR) modified asphalt and investigate the rheological and chemical properties after modification based on molecular dynamics (MD) simulation and experimental analysis. Unaged and aged SBR asphalt binders with six PPA contents (0, 0.3%, 0.6%, 0.9%, 1.2%, and 1.5%) were prepared and tested. Four modified asphalt system models in different modifying and aging states were constructed in the molecular dynamics process. The calculated molecular dynamics parameters were used to observe intermolecular behaviors and system phenomena. Dynamic shear rheometry (DSR) and Fourier transform infrared (FTIR) spectroscopy were used to characterize rheological and chemical properties respectively. The results showed that the addition of PPA increased the complex modulus (G*) to promote elasticity and stiffness, and then enhanced the rutting resistance of the SBR asphalt binder. Multiple stress creep recovery (MSCR) results revealed that PPA/SBR asphalt had a better high-temperature performance than SBR asphalt due to its excellent creep recovery capability. Besides, the interaction between PPA and asphalt introduced phosphorus-containing functional groups into asphalt. In addition, analysis of the free volume and mean square displacement (MSD) displayed larger and higher molecular weight in PPA/SBR asphalt hindered the diffusion and mobility of the system. The radial distribution function (RDF) and radius of gyration (R g ) were calculated to observe that PPA provided a more ordered and more stable molecular structure. The electron density and potential were estimated to explore the adsorption mechanism of PPA to asphalt or SBR molecules and explain the source of stability and orderliness of the unaged and aged PPA/SBR/asphalt system.

chemistry, physical,physics, atomic, molecular & chemical
Animal models for medications development targeting alcohol abuse using selectively bred rat lines: Neurobiological and pharmacological validity

R. Bell,H. Sable,G. Colombo,P. Hyytia,Z. Rodd,L. Lumeng

DOI: https://doi.org/10.1016/j.pbb.2012.07.007

2012-11-01

Abstract:
The Performance and Distribution of Polyurethane-Modified Asphalt That Exhibits Different Molecular Weights

Xiaoyi Ban,Zengping Zhang,Pengtao Chang,Suyu Zhang,Hao Liu,Yuzi Liang,Yujing Chen

DOI: https://doi.org/10.3390/su15086627

IF: 3.9

2023-04-13

Sustainability

Abstract:To analyze the effect of polyol on polyurethane (PU)-modified asphalt, three different soft segments of polyurethane were synthesized, and we utilized the reaction of MDI (diphenylmethane diisocyanate) with PU650, PU1000, and PU1400. With respect to molecular weight, the effect of polyol on the performance of modified asphalt was analyzed, and the asphalt was modified by using three different polyurethanes. To analyze the PU samples, the Fourier transform infrared spectroscopy (FTIR) tests and gel permeation chromatography (GPC) tests were selected; by contrast, to analyze the rheological properties and modification mechanism of asphalt, the dynamic rheology test (DSR), low-temperature bending creep test (BBR), multi-stress repetitive creep test (MSCR), FTIR, and differential scanning calorimetry (DSC) were selected. The results indicate that the molecular weight of polyol affects the molecular structure of polyurethane, the distribution of soft and hard segments, the content of soft segments, and the distribution of asphaltene in asphalt; thus, the asphalt modification effect occurs differently. The storage stability and high-temperature stability of the polyurethane-modified asphalts that were synthesized using three different polyols (i.e., polyols that exhibit different molecular weights) did not differ considerably, and the PU1400-modified asphalt exhibited the best low-temperature performance.

environmental sciences,environmental studies,green & sustainable science & technology
Laboratory Investigation of PPG-TDI Polyurethane–Modified Asphalt Binders and Mixtures

Zengping Zhang,Jia Sun,Li Wang,Yongbiao Zhu,Hao Liu,Ting Huang,Zhigang Huang

DOI: https://doi.org/10.1061/(asce)mt.1943-5533.0004367

IF: 3.2

2022-06-25

Journal of Materials in Civil Engineering

Abstract:Considering the defects of insufficient low-temperature flexibility and high cost of epoxy asphalt binder, low-cost polypropylene glycol (PPG) and toluene diisocyanate (TDI) were used to synthesize two polyurethane (PU) prepolymers (PTPU) with different isocyanate group (─ NCO) contents, and the properties of PTPU-modified asphalt binders and mixtures were studied. First, the mixing parameters of the PTPU-modified asphalt binders were determined through tests, and its storage stability, high- and low-temperature creep characteristics were studied. Then the microscopic modification mechanism of PTPU-modified asphalt binders was explored. Finally, the PTPU-modified asphalt binders were used to prepare mixtures, and the application performance in bridge deck pavement was evaluated. The results showed that PTPU-modified asphalt binder has satisfactory storage stability and high- and low-temperature performance. Chemical reactions occur during the modification process which change the micromorphology of the asphalt binder, and its high-and low-temperature performance and the adhesion to the aggregates are improved. The increase of -NCO content improves the high-temperature stability and mechanical strength of the PTPU-modified asphalt binder but reduces the flexibility. Hence, the ─ NCO content in PTPU can be adjusted according to actual needs during application. The PTPU-modified asphalt mixture has a good comprehensive performance, its low-temperature anticracking performance is improved greatly compared with that of epoxy asphalt mixture, and the lower price gives it good promotion and application prospects in engineering applications.

construction & building technology,materials science, multidisciplinary,engineering, civil
Study on the effect of soft segment length on the performance of polyether-based polyurethane modified asphalt

Hao Liu,Zengping Zhang,Suyu Zhang,Pengtao Chang,Yuzi Liang,Zhaofei Wang,Xiaoyi Ban,Yinxiao Guo,Xiaosong Liu

DOI: https://doi.org/10.1016/j.ijadhadh.2024.103642

IF: 3.848

2024-03-01

International Journal of Adhesion and Adhesives

Abstract:The molecular structure of the polyurethane soft segment has significant influence on the performance of polyurethane modified asphalt (PUMA). To investigate the effect of soft segment length on the performance of PUMA, three kinds of polytetramethylene ether glycol (PTMEG) with different molar masses were selected to synthesize three polyurethane prepolymers (PUP) with various soft segment lengths. As a result, modifying asphalt with these PUPs lead to three PUMAs. Research showed that the initial decomposition temperature of the PUP rised with the increment of soft segment length and eventually above the base asphalt. The high and low temperature properties of PUMA were enhanced with increasing the soft segment length. However, the dispersion of modifier in the asphalt became worse with higher soft segment length. It should be attributed to the interaction between PUP and asphalt molecules and the crystallization of soft segments. This study provides a good reference for the selection of materials for PUMA.

materials science, multidisciplinary,engineering, chemical
Rheological properties and storage stability of asphalt modified with nanoscale polyurethane emulsion

Ruien Yu,Xijing Zhu,Xing Zhou,Yanfei Kou,Maorong Zhang,Changqing Fang

DOI: https://doi.org/10.1080/10916466.2017.1405028

IF: 1.695

2017-12-04

Petroleum Science and Technology

Abstract:Nanoscale polyurethane emulsion which synthesized in previous work was used as polymer modifying agent herein to prepare modified asphalt by gentle agitation method. Rheological properties, storage stability, microstructure and polymer dispersibility of WPU-modified asphalt were investigated using dynamic shear rheological (DSR), segregation test, and fluorescence microscopy. Due to the reaction of active NCO groups in WPU and active hydrogen atoms in asphalt, the modified asphalt system can be stable stored at high temperature. In addition, the nano-particle size of polyurethane emulsion makes polymer uniformly dispersed in modified asphalt and work better.

energy & fuels,engineering, chemical, petroleum
High-Temperature Characteristics of Polyphosphoric Acid-Modified Asphalt and High-Temperature Performance Prediction Analysis of Its Mixtures

Meiyan Huang,Jianguo Wei,Yuming Zhou,Ping Li,Jinming Li,Haolong Ju,Song Shi

DOI: https://doi.org/10.3390/su16124922

IF: 3.9

2024-06-09

Sustainability

Abstract:To promote the application of economical and sustainable polyphosphoric acid (PPA)-modified asphalt in road engineering, styrene-butadiene block copolymer (SBS), styrene-butadiene rubber (SBR), and PPA were used to prepare PPA/SBS and PPA/SBR composite-modified asphalts, which were tested and the data analyzed. Fourier transform infrared spectroscopy (FTIR) tests and thermogravimetric analysis (TG) tests were carried out to study the modification mechanisms of the composite-modified asphalts, and the high-temperature performance of the PPA-modified asphalt and asphalt mixtures was analyzed by dynamic shear rheology (DSR) tests and wheel tracking tests. A gray correlation analysis and a back-propagation (BP) neural network were utilized to construct a prediction model of the high-temperature performance of the asphalt and asphalt mixtures. The test results indicate that PPA chemically interacts with the base asphalt and physically integrates with SBS and SBR. The PPA-modified asphalt has a higher decomposition temperature than the base asphalt, indicating superior thermal stability. As the PPA dosage increases, the G*/sinδ value of the PPA-modified asphalt also increases. In particular, when 0.6% PPA is combined with 2% SBS/SBR, it surpasses the high-temperature performance achieved with 4% SBS/SBR, suggesting that PPA may be a good alternative for polymer modifiers. In addition, the creep recovery of PPA-modified asphalt is influenced by the stress level, and as the stress increases, the R-value decreases, resulting in reduced elastic deformation. Furthermore, the BP neural network model achieved a fit of 0.991 in predicting dynamic stability, with a mean percentage of relative error (MAPE) of 6.15% between measured and predicted values. This underscores the feasibility of using BP neural networks in predictive dynamic stability models.

environmental sciences,environmental studies,green & sustainable science & technology
Study on the Performance and Modification Mechanism of Polyphosphoric Acid (PPA)/Styrene–Butadiene–Styrene (SBS) Composite Modified Asphalt

Xiangjie Niu,Yuanzhao Chen,Zhenxia Li,Tengteng Guo,Jing Wang,Lihui Jin

DOI: https://doi.org/10.3390/coatings13122003

IF: 3.236

2023-11-25

Coatings

Abstract:In order to address the high preparation cost of styrene–butadiene–styrene block copolymer (SBS) modified asphalt, four kinds of polyphosphoric acid (PPA) content (0%, 0.5%, 0.75%, and 1% PPA by weight of the matrix asphalt) were selected to prepare composite modified asphalt with better high-temperature performance. The physical properties of composite modified asphalt were evaluated by conventional performance tests. The rheological properties of composite modified asphalt were evaluated by dynamic shear rheometer (DSR) test and bending beam rheometer (BBR) test. The synergistic modification mechanism of PPA and SBS was revealed by the Fourier transform infrared spectroscopy test. The results show that with the increase of PPA content, the penetration of PPA/SBS composite modified asphalt is reduced by 20.92%, 25.07% and 28.94%, respectively, compared with matrix asphalt, and the softening point is increased by 5.46%, 22.69% and 34.03%, respectively. In addition, PPA can improve the thermal oxidative aging resistance of asphalt. PPA can improve the shear resistance, high-temperature performance and temperature sensitivity of asphalt. At 82 °C, compared with SBS modified asphalt, the phase angle of PPA/SBS composite modified asphalt decreased by 8.63%, 13.23% and 19.24%, respectively, and G*/sinδ increased by 41.97%, 67.62% and 70.97%, respectively. SBS mainly exists in asphalt in the form of physical blending, and PPA has a new chemical reaction with asphalt, which increases the macromolecules and chain hydrocarbon components in asphalt, and the macroscopic performance is the improvement of high-temperature performance of asphalt. However, PPA has a negative effect on the low-temperature performance of the SBS modified asphalt.

materials science, multidisciplinary,physics, applied, coatings & films
Research Progress and Prospect of Polyphosphoric Acid Modified Asphalt Technology

Guixing Xue

DOI: https://doi.org/10.9734/air/2024/v25i41126

2024-08-13

Advances in Research

Abstract:In order to clarify the current status of polyphosphoric acid (PPA)-modified asphalt technology, to solve its road problems, and to promote its further popularization and application, the research progress of PPA-modified asphalt technology in scientific research and engineering is summarized. Firstly, the chemical modification mechanism of PPA on asphalt is revealed from the components, chemical reaction and microstructure; the engineering application and service situation of PPA-modified asphalt pavements at home and abroad are evaluated; finally, the future research direction of PPA-modified asphalt is envisioned. The PPA-modified asphalt with dosage of 0.5%,1.0%,1.5%,2.0% was studied, and the presence of PPA was almost indistinguishable from that in the fluorescence micrographs of modified asphalt, and the compatibility between PPA and asphalt was excellent. Atomic force microscopy has a higher resolution relative to fluorescence electron microscopy as well as scanning electron microscopy.The results show that PPA can react chemically with asphalt components to increase the asphaltene content, and the incorporation of PPA helps to improve the high temperature performance, aging resistance, and fatigue characteristics of asphalt. At present, there is no supporting application guide for PPA-modified asphalt technology, and the lack of long-term observation of PPA-modified asphalt test sections restricts the popularization and application of PPA-modified asphalt technology in China.
Research of Low-Temperature Performance of Polyphosphoric Acid-Modified Asphalt

Jianguo Wei,Meiyan Huang,Yuming Zhou,Ping Li,Fan Yu,Haolong Ju,Song Shi

DOI: https://doi.org/10.3390/ma16010111

IF: 3.4

2022-12-23

Materials

Abstract:Polyphosphoric acid (PPA) modifier, which can effectively improve the rheological properties of asphalt, is widely used in pavement engineering. In order to accurately evaluate the low-temperature performance of PPA-modified asphalt, in this study, PPA-modified asphalt and PPA/SBR-modified asphalt were prepared. The modification mechanism was explored by scanning electron microscopy (SEM) and fourier transform infrared spectroscopy (FTIR). Bending Beam Rheology (BBR) test was carried out, and four indexes, including K index, viscous flow (η1), low-temperature integrated flexibility (Jc), and relaxation time (λ), were obtained by combining the Burgers model. The optimal low-temperature performance evaluation index of modified asphalt was determined by the analytic hierarchy process (AHP). The test results show that PPA addition to asphalt will produce chemical reactions, which can effectively improve the compatibility between SBR and neat asphalt. In the multi-index evaluation based on K, η1, Jc, and λ, the same optimum content of PPA was obtained. AHP analysis further demonstrates that Jc is the optimal evaluation index for laboratory research on the low-temperature performance of PPA-modified asphalt, and λ index is the ideal evaluation index for the low-temperature performance of asphalt in engineering applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

Ruiqi Chen,Wen Xu,Yixing Chen

DOI: https://doi.org/10.3390/app14167288

2024-08-19

Applied Sciences

Abstract:To address the issue of insufficient durability of traditional modified emulsified asphalt in the application of cold mix and cold paving anti-skid wear layers, this study utilizes cationic waterborne polyurethane (PU+) for composite modification to enhance adhesion and performance across a range of temperatures. Initially, composite-modified emulsified asphalt samples were prepared with varying dosages of PU+ according to a gradient method. Routine performance tests were conducted on the evaporated residues for analysis. Advanced rheological tests, including temperature sweep (TS), frequency sweep (FS), linear amplitude sweep (LAS), and multi-stress creep recovery (MSCR) tests, were performed using a dynamic shear rheometer (DSR). Surface free energy (SFE) tests were conducted with a fully automated surface tension meter (STM). A comprehensive evaluation of the high-temperature rheological properties, fatigue properties, adhesion properties, and water damage resistance of the modified emulsified asphalt residues was carried out. Chemical changes before and after modification were characterized using Fourier transform infrared spectroscopy (FTIR), and the distribution of polymers in the evaporated residue was observed using fluorescence microscopy (FM). The results demonstrated that cationic waterborne polyurethane significantly enhanced the fatigue and adhesion properties of SBS-modified emulsified asphalt, but it also weakened the water damage resistance of asphalt. MSCR tests revealed that the addition of cationic waterborne polyurethane might reduce the elastic recovery performance of modified asphalt, thereby weakening its resistance to rutting. Among the samples, the modified asphalt with a PU+ content of 6% exhibited good high-temperature shear resistance and elastic recovery performance, demonstrating the best anti-rutting performance.

Engineering,Materials Science
Study on the performance and mechanism of physicochemically modified asphalt based on spatial crosslinking by the crumb rubber and polyurethane precursor

Junfu Liu,Zepeng Fan,Dawei Wang,Tianshuai Li,Qilin Yang,Jiazhu Wang,Guoyang Lu

DOI: https://doi.org/10.1080/10298436.2024.2385685

2024-10-11

International Journal of Pavement Engineering

Abstract:Crumb rubber (CR)-modified asphalt shows positive effects on engineering performance and environmental conservation. However, its limited compatibility with asphalt due to unstable interactions poses challenges for its application. The incorporation of polyurethane precursor-based reactive modifier (PRM) facilitates the establishment of a three-dimensional crosslinked network structure within the asphalt, thereby enhancing pavement performance and compatibility. In this study, a novel compound-modified asphalt (CPMA) was prepared with CR and PRM. The performance of CPMA was assessed using the Dynamic Shear Rheometer (DSR), Blend Beam Rheology (BBR) and storage stability tests. Microstructure and modification mechanism were revealed by Atomic Force Microscopy (AFM) and Fluorescence Microscopy (FM) analyses. The results show that CPMA produced using an optimized process has better high-temperature performance and fatigue life than CR-modified asphalt (CRMA) and PRM-modified asphalt (PMA). Polar molecules, such as asphaltenes and resins, are crosslinked by the PRM to form a three-dimensional network, which enhances the thermal storage stability of CPMA. Furthermore, the flexibility and resilience of CR mitigated the low-temperature hardening of PMA. Physicochemical compound modifications provide significant advantages in terms of performance enhancement and system stability and demonstrate the potential of CR and PRM to complement and enhance their respective applications.

construction & building technology,engineering, civil,materials science, characterization & testing
Investigation on the High- and Low-Temperature Performance of Organic Rectorite and Polyurethane Composite-Modified Asphalt Binder

Li Wang,Zengping Zhang,Jia Sun,Hao Liu,Yongming Wei,Dali Zhang,Zhaofei Wang

DOI: https://doi.org/10.1061/jmcee7.mteng-15896

IF: 3.2

2023-09-01

Journal of Materials in Civil Engineering

Abstract:Organic rectorite (OREC) can significantly improve the resistance of asphalt to deformation and aging, but it tends to cause low-temperature cracking. To solve this defect, a novel idea that develops an OREC and polyurethane (PU) composite-modified asphalt binder has been put forward in this work. Various modified asphalt binder systems containing different combinations of OREC and PU contents were prepared by the melt blending method. The storage stability of the OREC/PU-modified asphalt binders was studied. The high- and low-temperature properties of binders were investigated by dynamic shear rheometer and bending beam rheometer tests. The microstructure and modification mechanism of the binders were characterized by gel permeation chromatography, differential scanning calorimetry, and Fourier transforms infrared spectroscopy. The results showed that the OREC/PU-modified asphalt binder displayed good high-temperature storage stability. However, excessively high content of OREC will adversely affect the storage stability of asphalt. In the 2% by weight OREC/9% by weight PU modified asphalt system, OREC and PU exhibited excellent synergistic effects. And the high- and low-temperature properties of the asphalt were significantly improved. The introduction of OREC/PU reduces the Tg of the asphalt binder and the enthalpy during temperature change. The modified asphalt has good low-temperature flexibility through the physical and chemical interaction between polyurethane and asphalt during the modification process. PU can intercalate OREC and react with active hydrogens in asphalt to generate cross-linked structures to enhance the high- and low-temperature properties of the asphalt binder.

construction & building technology,materials science, multidisciplinary,engineering, civil

AMYLOIDOSIS: ITS DIFFERENTIATION INTO PERIRETICULIN AND PERI-COLLAGEN TYPES.

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Mechanical and Rheological Properties of Polyurethane-Polyurea (Pu-Pua) Modified Asphalt Binder

Laboratory Study and Molecular Dynamics Simulation of High- and Low-Temperature Properties of Polyurethane-Modified Asphalt

Effects of Polyurethane Thermoplastic Elastomer on Properties of Asphalt Binder and Asphalt Mixture

Influence on Polyurethane Synthesis Parameters Upon the Performance of Base Asphalt

Nosocomial candidemia in a university hospital in Taiwan.

Research on modification mechanism and performance of an innovative bio-based polyurethane modified asphalt: A sustainable way to reducing dependence on petroleum asphalt

Properties of polymer modified asphalt by polyphosphoric acid through molecular dynamics simulation and experimental analysis

Animal models for medications development targeting alcohol abuse using selectively bred rat lines: Neurobiological and pharmacological validity

The Performance and Distribution of Polyurethane-Modified Asphalt That Exhibits Different Molecular Weights

Laboratory Investigation of PPG-TDI Polyurethane–Modified Asphalt Binders and Mixtures

Study on the effect of soft segment length on the performance of polyether-based polyurethane modified asphalt

Rheological properties and storage stability of asphalt modified with nanoscale polyurethane emulsion

High-Temperature Characteristics of Polyphosphoric Acid-Modified Asphalt and High-Temperature Performance Prediction Analysis of Its Mixtures

Study on the Performance and Modification Mechanism of Polyphosphoric Acid (PPA)/Styrene–Butadiene–Styrene (SBS) Composite Modified Asphalt

Research Progress and Prospect of Polyphosphoric Acid Modified Asphalt Technology

Research of Low-Temperature Performance of Polyphosphoric Acid-Modified Asphalt

Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

Study on the performance and mechanism of physicochemically modified asphalt based on spatial crosslinking by the crumb rubber and polyurethane precursor

Investigation on the High- and Low-Temperature Performance of Organic Rectorite and Polyurethane Composite-Modified Asphalt Binder