Abstract:The objective of this study aims to investigate the performance of thermoplastic polyurethane elastomers (TPU)-modified asphalt, with special focus on the influence of polyurethane synthesis parameters upon the performance of base asphalt. In this study, the TPU modifier was incorporated into base asphalt to prepare TPU-modified asphalt by using a self-determined laboratory process. The properties of polyester-based TPU and polyether-based TPU modified asphalt with different contents was analyzed by the base performance tests. The Fourier transform infrared spectroscopy (FTIR), fluorescent microscope, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravity (TG), dynamic shear rheology (DSR), and bending beam rheology (BBR) tests were conducted to expose chemical, microstructure, and rheological properties of the asphalt binders, respectively. The results indicated that the modified asphalt with 5% TPU modifier exhibited a favorable performance in terms of the penetration, ductility, softening point, and rotational viscosity, respectively. The isocyanate and polyol reacted to form carbamate in the TPU-modified asphalt, and moreover the isocyanate and aromatic compounds reacted to form halohydrins in the asphalt. Large particles contained in the polyester-based TPU-modified asphalt increased obviously with the increase of C h (Hard segment content) and r (Isocyanate root index, molar ratio between NCO and OH) value, the fracture mode of it subjected to external load indicated a typical brittle fracture. The content of MDI in the synthesized polyurethane modifier was an important factor affecting the high-temperature stability of the modified asphalt. The polyester-based TPU modifier had a better high temperature performance than the polyether-based TPU modifier. The polyether polyol chain segment showed a greater flexibility as compared to polyester polyol; the addition of polyether polyols can be effectively offset of MDI chain rigidity as r ≤ 1 and C h < 40% leading to the improvement of the viscoelastic property of asphalt. When C h = 40% and r = 0.95, the polyether-based TPU-modified asphalt exhibited the same high-temperature grade as the polyester-based TPU-modified asphalt, whereas the polyether-based TPU-modified asphalt showed obviously higher low temperature grades. The polyester-based TPU with C h = 40% and r = 1 can be used as a modifier to increase the durability of asphalt binders.

Rheological properties and storage stability of asphalt modified with nanoscale polyurethane emulsion

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Mechanical and Rheological Properties of Polyurethane-Polyurea (Pu-Pua) Modified Asphalt Binder

Polyurethane/graphene oxide nanocomposite and its modified asphalt binder: Preparation, properties and molecular dynamics simulation

The Performance and Distribution of Polyurethane-Modified Asphalt That Exhibits Different Molecular Weights

Modifying Effect and Mechanism of Polymer Powder on the Properties of Asphalt Binder for Engineering Application

Rheological Properties and Modification Mechanism of Emulsified Asphalt Modified with Waterborne Epoxy/Polyurethan Composite

Effects of waterborne polyurethane on storage stability, rheological properties, and VOCs emission of crumb rubber modified asphalt

Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

Evaluation of Rheological and Anti-Aging Properties of TPU/Nano-TiO2 Composite-Modified Asphalt Binder

Evaluation of Properties and Micro-Characteristics of Waste Polyurethane/Styrene-Butadiene-Styrene Composite Modified Asphalt

Influence on Polyurethane Synthesis Parameters Upon the Performance of Base Asphalt

Investigation of the Rheological Properties and Storage Stability of Waste Polyethylene/Ethylene–Vinyl Acetate-Modified Asphalt with Crosslinking and a Silicone Coupling Agent

Laboratory Study and Molecular Dynamics Simulation of High- and Low-Temperature Properties of Polyurethane-Modified Asphalt

Investigation on the High- and Low-Temperature Performance of Organic Rectorite and Polyurethane Composite-Modified Asphalt Binder

Experimental studies and molecular dynamics simulation of the compatibility between thermoplastic polyurethane elastomer (TPU) and asphalt

Aging resistance of polyurethane/graphene oxide composite modified asphalt: performance evaluation and molecular dynamics simulation

Repurposing Waste Polyurethane into Cleaner Asphalt Pavement Materials: Laboratory Investigation

Preparation Scheme Optimization of Thermosetting Polyurethane Modified Asphalt

Rheological and adhesion properties of nano-organic palygorskite and linear SBS on the composite modified asphalt

Laboratory Investigation of PPG-TDI Polyurethane–Modified Asphalt Binders and Mixtures