Abstract:The objective of this study aims to investigate the performance of thermoplastic polyurethane elastomers (TPU)-modified asphalt, with special focus on the influence of polyurethane synthesis parameters upon the performance of base asphalt. In this study, the TPU modifier was incorporated into base asphalt to prepare TPU-modified asphalt by using a self-determined laboratory process. The properties of polyester-based TPU and polyether-based TPU modified asphalt with different contents was analyzed by the base performance tests. The Fourier transform infrared spectroscopy (FTIR), fluorescent microscope, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravity (TG), dynamic shear rheology (DSR), and bending beam rheology (BBR) tests were conducted to expose chemical, microstructure, and rheological properties of the asphalt binders, respectively. The results indicated that the modified asphalt with 5% TPU modifier exhibited a favorable performance in terms of the penetration, ductility, softening point, and rotational viscosity, respectively. The isocyanate and polyol reacted to form carbamate in the TPU-modified asphalt, and moreover the isocyanate and aromatic compounds reacted to form halohydrins in the asphalt. Large particles contained in the polyester-based TPU-modified asphalt increased obviously with the increase of C h (Hard segment content) and r (Isocyanate root index, molar ratio between NCO and OH) value, the fracture mode of it subjected to external load indicated a typical brittle fracture. The content of MDI in the synthesized polyurethane modifier was an important factor affecting the high-temperature stability of the modified asphalt. The polyester-based TPU modifier had a better high temperature performance than the polyether-based TPU modifier. The polyether polyol chain segment showed a greater flexibility as compared to polyester polyol; the addition of polyether polyols can be effectively offset of MDI chain rigidity as r ≤ 1 and C h < 40% leading to the improvement of the viscoelastic property of asphalt. When C h = 40% and r = 0.95, the polyether-based TPU-modified asphalt exhibited the same high-temperature grade as the polyester-based TPU-modified asphalt, whereas the polyether-based TPU-modified asphalt showed obviously higher low temperature grades. The polyester-based TPU with C h = 40% and r = 1 can be used as a modifier to increase the durability of asphalt binders.

Effects of Polyurethane Thermoplastic Elastomer on Properties of Asphalt Binder and Asphalt Mixture

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Influence on Polyurethane Synthesis Parameters Upon the Performance of Base Asphalt

Mechanical and Rheological Properties of Polyurethane-Polyurea (Pu-Pua) Modified Asphalt Binder

Modifying Effect and Mechanism of Polymer Powder on the Properties of Asphalt Binder for Engineering Application

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Laboratory Study and Molecular Dynamics Simulation of High- and Low-Temperature Properties of Polyurethane-Modified Asphalt

Preparation Scheme Optimization of Thermosetting Polyurethane Modified Asphalt

Laboratory Investigation of PPG-TDI Polyurethane–Modified Asphalt Binders and Mixtures

The Performance and Distribution of Polyurethane-Modified Asphalt That Exhibits Different Molecular Weights

Influence of Thermoplastic Polyurethane on the Properties of Asphalt Cement and the Elastic Behavior of Asphalt Mixtures

Preparation Process and Performance of Polyurethane-Modified Bitumen for Ultrathin Asphalt Layers

Experimental studies and molecular dynamics simulation of the compatibility between thermoplastic polyurethane elastomer (TPU) and asphalt

Study on the Dynamic Performance of PU and SBS-Modified Asphalt Mixtures with Dense Gradation

Study on the effect of soft segment length on the performance of polyether-based polyurethane modified asphalt

Investigation on the High- and Low-Temperature Performance of Organic Rectorite and Polyurethane Composite-Modified Asphalt Binder

Synthesis of environmental-curable CO 2 -based polyurethane and its enhancement on properties of asphalt binder

Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

Research on Performance of SBS-PPA and SBR-PPA Compound Modified Asphalts

Design and properties of polyurethane solid–solid phase-change granular temperature regulation asphalt mixtures

923 PERFORMANCE CHARACTERISTICS OF THERMOSETTING POLYURETHANE MODIFIED ASPHALT BINDER AND ITS MIXTURES