Abstract:The objective of this study aims to investigate the performance of thermoplastic polyurethane elastomers (TPU)-modified asphalt, with special focus on the influence of polyurethane synthesis parameters upon the performance of base asphalt. In this study, the TPU modifier was incorporated into base asphalt to prepare TPU-modified asphalt by using a self-determined laboratory process. The properties of polyester-based TPU and polyether-based TPU modified asphalt with different contents was analyzed by the base performance tests. The Fourier transform infrared spectroscopy (FTIR), fluorescent microscope, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravity (TG), dynamic shear rheology (DSR), and bending beam rheology (BBR) tests were conducted to expose chemical, microstructure, and rheological properties of the asphalt binders, respectively. The results indicated that the modified asphalt with 5% TPU modifier exhibited a favorable performance in terms of the penetration, ductility, softening point, and rotational viscosity, respectively. The isocyanate and polyol reacted to form carbamate in the TPU-modified asphalt, and moreover the isocyanate and aromatic compounds reacted to form halohydrins in the asphalt. Large particles contained in the polyester-based TPU-modified asphalt increased obviously with the increase of C h (Hard segment content) and r (Isocyanate root index, molar ratio between NCO and OH) value, the fracture mode of it subjected to external load indicated a typical brittle fracture. The content of MDI in the synthesized polyurethane modifier was an important factor affecting the high-temperature stability of the modified asphalt. The polyester-based TPU modifier had a better high temperature performance than the polyether-based TPU modifier. The polyether polyol chain segment showed a greater flexibility as compared to polyester polyol; the addition of polyether polyols can be effectively offset of MDI chain rigidity as r ≤ 1 and C h < 40% leading to the improvement of the viscoelastic property of asphalt. When C h = 40% and r = 0.95, the polyether-based TPU-modified asphalt exhibited the same high-temperature grade as the polyester-based TPU-modified asphalt, whereas the polyether-based TPU-modified asphalt showed obviously higher low temperature grades. The polyester-based TPU with C h = 40% and r = 1 can be used as a modifier to increase the durability of asphalt binders.

Synthesis of environmental-curable CO 2 -based polyurethane and its enhancement on properties of asphalt binder

Design and Modification Mechanism of a Novel High-Viscosity Thermoplastic Polyurethane Modified Asphalt

Investigation on Thermo-Rheological Properties and Stability of Sbr Modified Asphalts Containing Palygorskite Clay

Preparation Scheme Optimization of Thermosetting Polyurethane Modified Asphalt

Influence on Polyurethane Synthesis Parameters Upon the Performance of Base Asphalt

Mechanical and Rheological Properties of Polyurethane-Polyurea (Pu-Pua) Modified Asphalt Binder

Laboratory Investigation of PPG-TDI Polyurethane–Modified Asphalt Binders and Mixtures

Research on modification mechanism and performance of an innovative bio-based polyurethane modified asphalt: A sustainable way to reducing dependence on petroleum asphalt

Green synthesis of polyurethane with reversible oxime-urethane bond to enhance the self-healing properties of asphalt binder at room temperature

Modifying Effect and Mechanism of Polymer Powder on the Properties of Asphalt Binder for Engineering Application

The Performance and Distribution of Polyurethane-Modified Asphalt That Exhibits Different Molecular Weights

Laboratory Study and Molecular Dynamics Simulation of High- and Low-Temperature Properties of Polyurethane-Modified Asphalt

Effects of Polyurethane Thermoplastic Elastomer on Properties of Asphalt Binder and Asphalt Mixture

Investigation on the epoxy/polyurethane modified asphalt binder cured with bio-based curing agent: Properties and optimization

Investigation on the High- and Low-Temperature Performance of Organic Rectorite and Polyurethane Composite-Modified Asphalt Binder

Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

Repurposing Waste Polyurethane into Cleaner Asphalt Pavement Materials: Laboratory Investigation

Evaluation of Properties and Micro-Characteristics of Waste Polyurethane/Styrene-Butadiene-Styrene Composite Modified Asphalt

Factors Affecting the Properties of PCB-Modified Asphalt

Study on Road Performance of Polyurethane Cold-Recycled Mixture

Preparation and properties of polyurethane/epoxy-resin modified asphalt binders and mixtures using a bio-based curing agent