Abstract:The preparation of monolithic silica aerogels via non-supercritical drying is realized by the following procedures: (1) formation of silica alcogels with perfect network structure by controlling two-step hydrolysis and condensation reaction rates of tetraethoxysilane; (2) improvement and reinforcement of network structure and strength of silica gels through exchanging the pore fluid with ethanol solvent thoroughly, immersing of gels in the ethanol solutions of tetraethyoxysilane and aging; (3) gradual drying under ethanol fluid whose surface tension is much lower than water under ambient pressure. The resulting aerogels were characterized by means of SEM, TEM, TG-DTA, XRD, and adsorption-desorption techniques. It is found that the aerogels, which are made up of uniform spherical nanoparticles with diameters of about 10 nm, are of coherent network structures. Furthermore, the aerogels are porous, and the porosity is as high as 91%. The diameter of the pore sizes is in the range of 10 similar to 30 nm, and the density of the aerogels is low (200 similar to 400 kg . m(-3)). The specific surface area of the aerogels can be as high as 625. 65 m(2) . g(-1). The appearance, microstructure, diameters of primary particles and pore size distributions of the aerogels are in concordance with those prepared by conventional supercritical drying. It is demonstrated that the quality of the resulting aerogels is affected by the preparation conditions adopted in the preparation process. In fact, by adjusting the proportions of the reaction systems, and controlling the adding amounts of acid and base during the two-step hydrolysis and condensation process, silica aerogels with required density, definite strength and ideal morphology can be produced.

Structural Analysis And Control Of Ultralow Density Silica Aerogels Prepared By Sol-Gel Process

Preparation and molding of ultralow-density silica aerogels

Preparation of Silica Aerogels by Non-Supercritical Drying

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

PREPARATION OF SILICA AEROGELS BY SUPERCRITICAL DRYING TECHNIQUE

Preparation of SiO2 aerogels with sol-gel method and the study of their properties

Rapid Preparation of Ultralow-density Silica Aerogels

Preparation and characterization of monolithic TiO2/SiO2 aerogels obtained by non-supercritical drying method

NEW PREPARATION METHOD OF ULTRA-LOW DENSITY SILICA AEROGELS

Structure modification of silica aerogel

Microstructure Control of Nanoporous Silica Thin Film Prepared by Sol-Gel Process

Control of Aerogel Structure

Application of Drying Control Chemical Additives in Preparation for Silica Aerogels

Nanostructural Investigation of Silica Aerogels

PREPARATION OF SILICA AEROGELS IN AMBIENT PRESSURE DRYING AND ANALYSIS OF PROPERTIES

Preparation and Characterization of Ultralow Density Silica Aerogels by Acetonitrile Supercritical Drying

Preparation and Characterization of Microscaled Silica Areogel Balls by Emulsion Method

Preparation of Low Density Hydrophobic Silica Aerogels by Controlling Strength of Alcogels

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Greatly Strengthened Silica Aerogels Via Co-Gelation of Binary Sols with Different Concentrations: A Method to Control the Microstructure of the Colloids

Ambient Pressure Preparation,Surface Structure and Adsorption Properties of Silica Aerogels