Abstract:Polyimides (PI) are a class of dielectric polymer used in a wide range of electronics and electrical engineering applications from low-voltage microelectronics to high voltage isolation. They are well appreciated because of their excellent thermal, electrical, and mechanical properties, each of which need to be optimized uniquely depending on the end application. For example, for high-voltage applications, the final polymer breakdown field and dielectric properties must be optimized, both of which are dependent on the curing process and the final physico-chemical properties of PI. The majority of studies to date have focused on a limited set of properties of the polymer and have analyzed the effect of curing from a physicochemical-, mechanical- or electrical-centric viewpoint. This paper seeks to overcome this, unifying all of these characterizations in the same study to accurately describe the universal effect of the cure temperature on the properties of PI and at an industrial processing scale. This paper reports the widest-ranging study of its kind on the effect that cure temperature has on the physico-chemical, mechanical, thermal and electrical properties of polyimide, specifically poly (pyromellitic dianhydride-co-4, 4′-oxydianiline) (PMDA/ODA). The optimization of the cure temperature is accurately studied not only regarding the degree of imidization (DOI), but also considering the entire physical properties. Particularly, the analysis elucidates the key role of the charge–transfer complex (CTC) on these properties. The results show that while the thermal and mechanical properties improve with both DOI and CTC formation, the electrical properties, particularly at high field conditions, show an antagonistic behavior enhancing with increasing DOI while degrading at higher temperatures as the CTC formation increases. The electrical characterization at low field presents an enhancement of the final PI properties likely due to the DOI. On the contrary, at high electric field, the conductivity results show an improvement at an intermediate temperature emphasizing an ideal compromise between a high DOI and PI chain packing when the thermal imidization process is performed over this equilibrium. This balance enables maximum performance to be obtained for the PI film with optimized electrical properties and, overall, optimal thermal and mechanical properties are achieved.

A STUDY ON CTE OF NANO-INORGANIC HYBRIDED POLYIMIDE USING DSCM

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Preparation and properties of nano-SiC/polyimide composite films with low thermal expansion characteristic

Determining Thermal and Mechanical Properties of Polyimide Using the DIC Method

Polyimide/mica hybrid films with low coefficient of thermal expansion and low dielectric constant

Microstructure and Electrical Properties in Three-Component (al2o3−tio2)/polyimide Nanocomposite Films

Achieving Both Low Thermal Expansion and Low Birefringence for Polyimides by Regulating Chain Structures

Dual covalent bond induced high thermally conductive polyimide composite films based on CNT@CN complex filler

Research Update: Polyimide/CaCu3Ti4O12 Nanofiber Functional Hybrid Films with Improved Dielectric Properties

A Universal Study on the Effect Thermal Imidization Has on the Physico-Chemical, Mechanical, Thermal and Electrical Properties of Polyimide for Integrated Electronics Applications

Preparation and Charge Transport of Polyimide Insulating Nanocomposite Films

Molecular dynamics simulation of polymer wrapping for interfacial characteristics of aligned carbon nanotube/polyimide nanocomposites

Cryogenic Mechanical and Electrical Properties of Polyimide Nanocomposites

Enhanced Interfacial and Dielectric Performance for Polyetherimide Nanocomposites through Tailoring Shell Polarities

Polyimide-based composites reinforced by carbon nanotube-grafted carbon fiber for improved thermal conductivity and mechanical property

Dielectric and Dynamic Mechanical Properties of Polyimide–clay Nanocomposite Films

Measurement of Coefficient of Thermal Expansion of Films Using Digital Image Correlation Method

Improving Thermal Conductivity and Tribological Performance of Polyimide by Filling Cu, CNT, and Graphene

High-Impact Performance and Thermal Properties of Polyimine Nanocomposites Reinforced by Silicon Carbide Nano-Whiskers